Compressive fatigue behavior of compound concrete containing demolished concrete lumps
Source abstract
Abstract
Abstract This research focused on the uniaxial compressive fatigue behavior of compound concrete (CC) made of fresh concrete (FC) and demolished concrete lumps (DCLs) distinctly larger than conventional recycled aggregates. Sixty cylindrical and three planar specimens were tested under constant-amplitude sinusoidal loading. Digital image correlation was employed to monitor the initiation and propagation of cracks on the specimens. The variances in the dissipated energy, Poisson’s ratio, fatigue modulus and longitudinal residual strain of the cylindrical specimens with the number of cycles are discussed. Linear formulas describing the relationship between secondary strain rate and fatigue life are presented. The results indicate that there is no distinct difference in fatigue life between CC and conventional concrete, though the lateral expansion of CC under such loading is greater. The replacement ratio of DCLs can hardly influence the secondary strain rate of CC. The interfaces between DCLs and FC are not evident weak zones in CC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. A critical review and assessment for usage of recycled aggregate as sustainable construction material10.1016/j.conbuildmat.2016.11.029 ↗
2. Recycled concrete aggregates10.1016/j.cemconcomp.2004.02.020 ↗
3. Experimental study on mechanical behaviors of concrete with large-size recycled coarse aggregate10.1016/j.conbuildmat.2016.05.110 ↗
4. Fredonia, World Construction Aggregates to 2011-Demand and Sales Forecasts; Market Share, Market Size, Market leaders, Industry Report (2007).
5. Recycled concrete as a source of aggregate
6. Numerical modelling of plastic–damage response and crack propagation in RAC under uniaxial loading10.1680/jmacr.17.00042 ↗
7. Durability of recycled aggregate concrete under coupling mechanical loading and freeze-thaw cycle in salt-solution10.1016/j.conbuildmat.2017.12.194 ↗
8. Establishing a relationship between modulus of elasticity and compressive strength of recycled aggregate concrete10.1016/j.jclepro.2015.10.064 ↗
9. Effects of nano-particles on failure process and microstructural properties of recycled aggregate concrete10.1016/j.conbuildmat.2017.03.051 ↗
10. Behavior of FRP-confined compound concrete containing recycled concrete lumps10.1061/(ASCE)CC.1943-5614.0000602 ↗
11. Fatigue limit of recycled aggregate concrete10.1016/j.conbuildmat.2013.11.032 ↗
12. Structural response of thin-walled circular steel tubular columns filled with demolished concrete lumps and fresh concrete10.1016/j.conbuildmat.2016.10.099 ↗
13. Primary study on recycled-concrete-segment filled steel tubular members
14. Department of housing and urban-rural development of Guangdong province, DBJ/T 15-113-2016 Technical specification for composite structures containing demolished concrete blocks, (2016) (in Chinese).
15. Axial loading tests of thin-walled circular steel tubes infilled with cast-in-place concrete and precast segments containing DCLs10.1016/j.tws.2018.02.008 ↗
16. Cyclic behavior of thin-walled square steel tubular columns filled with demolished concrete lumps and fresh concrete10.1016/j.jcsr.2012.05.003 ↗
17. Behavior of reinforced concrete beams filled with demolished concrete lumps10.12989/sem.2011.40.3.411 ↗
18. Size effect on compressive behaviours of normal-strength concrete cubes made from demolished concrete blocks and fresh concrete10.1680/macr.13.00053 ↗
19. Compressive behaviors of cylindrical concrete specimens made of demolished concrete blocks and fresh concrete10.1016/j.conbuildmat.2013.11.071 ↗
20. Compressive behaviors of cubes and cylinders made of normal-strength demolished concrete blocks and high-strength fresh concrete10.1016/j.conbuildmat.2015.01.027 ↗
21. Mechanical properties of compound concrete containing demolished concrete lumps after freeze-thaw cycles10.1016/j.conbuildmat.2017.07.150 ↗
22. Tensile-splitting behaviors of compound concrete containing demolished concrete lumps10.1061/(ASCE)MT.1943-5533.0002190 ↗
23. Application of steel stub columns filled with demolished concrete segment/lump in Culture & Entertainment Centre of Zijin County
24. The effect of rate of loading upon the static and fatigue strengths of plain concrete in compression10.1680/macr.1973.25.83.73 ↗
25. Fatigue of concrete by constant and variable amplitude loading
26. Experimental investigation of the fatigue strength of plain concrete under high compressive loading10.1007/BF02473210 ↗
27. Fatigue properties of lightweight aggregate concrete
28. Experimental study of the fatigue behavior of high strength concrete10.1016/0008-8846(96)00151-2 ↗
29. Fatigue behavior of high-performance concrete10.1061/(ASCE)0899-1561(1993)5:1(96) ↗
30. Fatigue behavior of fiber-reinforced concrete in compression10.1016/S0958-9465(01)00019-1 ↗
31. Effect of the loading frequency on the compressive fatigue behavior of plain and fiber reinforced concrete10.1016/j.ijfatigue.2014.08.005 ↗
32. Fracture and fatigue behaviour of a high strength limestone concrete as compared to gravel concrete
33. Fatigue behavior of recycled aggregate concrete under compression and bending cyclic loadings10.1016/j.conbuildmat.2012.09.024 ↗
34. Considerations for design of concrete structures subjected to fatigue loading
35. Fatigue performance of rubber-modified recycled aggregate concrete (RRAC) for pavement10.1016/j.conbuildmat.2015.07.042 ↗
36. Fatigue analysis of plain and fiber-reinforced self-consolidating concrete
37. Fatigue of concrete under uniaxial compression cyclic loading
38. Fatigue behaviour of a normal-strength concrete-number of cycles to failure and strain development10.1002/suco.201500139 ↗
39. Reduction mechanisms of fatigue strength of concrete under compression due to permeation of liquids10.1016/j.conbuildmat.2012.07.010 ↗
40. Experimental study on dynamic mechanical properties of the basalt fiber reinforced concrete after the freeze-thaw based on the digital image correlation method10.1016/j.conbuildmat.2017.02.133 ↗
41. An experimental investigation on the FPZ properties in concrete using digital image correlation technique10.1016/j.engfracmech.2011.08.016 ↗
42. Crack propagation in recycled aggregate concrete under uniaxial compressive loading
43. Failure processes of modeled recycled aggregate concrete under uniaxial compression10.1016/j.cemconcomp.2012.06.017 ↗
44. China Architecture & Building Press., CECS 03: 2007 Technical specification for testing concrete strength with drilled core, (2007) (in Chinese).
45. American Society for Testing and Materials, ASTM C127–12 Standard test method for density, relative density (specific gravity), and absorption of coarse aggregate, (2012).
46. Shape effect on compressive mechanical properties of compound concrete containing demolished concrete lumps10.1016/j.conbuildmat.2018.07.086 ↗
47. American Society for Testing and Materials, ASTM C39/C39M–14a Standard test method for compressive strength of cylindrical concrete specimens, (2014).
48. American Society for Testing and Materials, ASTM C469/C469M–14 Standard test method for static modulus of elasticity and Poisson’s ratio of concrete in compression, (2014).
49. A new method to infer the initial compressive strength of a single concrete specimen in its fatigue damage test
50. Flexural fatigue strength of steel fiber reinforced concrete beams
51. Flexural fatigue-life distributions of plain and fibrous concrete at various stress levels10.1061/(ASCE)0899-1561(2005)17:6(650) ↗
52. Analysis of flexural fatigue failure of concrete made with 100% coarse recycled concrete aggregates10.1016/j.conbuildmat.2015.10.098 ↗
53. Compressive fatigue performance of fiber-reinforced lightweight concrete with high-volume supplementary cementitious materials10.1016/j.cemconcomp.2016.07.007 ↗
54. Statistical methods for evaluating core strength results
55. Optimization of mechanical properties in concrete reinforced with fibers from solid urban wastes (PET bottles) for the production of ecological concrete10.1016/j.conbuildmat.2017.05.148 ↗
56. Tensile behavior of epoxy based FRP composites under extreme service conditions10.1016/j.compositesb.2011.08.042 ↗
57. Flexural fatigue strength of plain concrete