journal article·2019-07Open access

Influence of microencapsulated phase change materials (PCMs) on the chloride ion diffusivity of concretes exposed to Freeze-thaw cycles: Insights from multiscale numerical simulations

Sumeru Nayak, Gideon A. Lyngdoh, Sumanta Das

Abstract

Abstract Use of phase change materials (PCMs) to tailor the thermal performance of concretes by efficient energy storage and transmission has gained traction in recent years. This study incorporates microencapsulated PCMs as sand-replacement in concrete bridge decks and performs numerical simulation involving multiple interactive length scales to elucidate the influence of PCM-incorporation in concretes subjected to combined freeze-thaw and chloride ingress-induced deterioration. The simulations show significant increase in durability against combined freeze-thaw and chloride ingress-induced deterioration in concretes when microencapsulated PCMs are incorporated. In addition, a reliability-based probabilistic analysis shows significant increase in life expectancy of bridge decks with PCM-incorporation. The numerical approach presented here provides efficient means to develop design strategies to tune dosage and transition temperature of PCMs to maximize durability of concrete structures in regions that experience significant winter weather conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. Potential applications of phase change materials in concrete technology10.1016/j.cemconcomp.2007.04.007 ↗
2. lightweight concrete containing phase change materials (PCMs): a numerical investigation on the thermal behaviour of cladding panels10.3390/buildings7020035 ↗
3. Use of phase change materials for thermal energy storage in concrete: an overview10.1016/j.conbuildmat.2013.04.031 ↗
4. Incorporating phase change materials in concrete pavement to melt snow and ice10.1016/j.cemconcomp.2017.09.002 ↗
5. Diurnal thermal analysis of microencapsulated PCM-concrete composite walls10.1016/j.enconman.2014.12.078 ↗
6. Annual energy analysis of concrete containing phase change materials for building envelopes10.1016/j.enconman.2015.06.068 ↗
7. Review on using microencapsulated phase change materials (PCM) in building applications10.1016/j.enbuild.2015.07.019 ↗
8. Advanced energy storage materials for building applications and their thermal performance characterization: a review10.1016/j.rser.2015.12.081 ↗
9. A. Jayalath, P. Mendis, R. Gammampila, L. Aye, Applications of phase change materials in concrete for sustainable built environment : a review, Digital Library of University of Moratuwa Sri Lanka. (2013). http://dl.lib.mrt.ac.lk/handle/123/9349 (accessed May 25, 2018).
10. Numerical simulations to quantify the influence of phase change materials (PCMs) on the early- and later-age thermal response of concrete pavements10.1016/j.cemconcomp.2017.04.006 ↗
11. Use of phase change materials (PCMs) to mitigate early age thermal cracking in concrete: Theoretical considerations10.1016/j.conbuildmat.2016.09.046 ↗
12. On the feasibility of using phase change materials (PCMs) to mitigate thermal cracking in cementitious materials10.1016/j.cemconcomp.2014.03.003 ↗
13. Numerical simulation of the freeze–thaw behavior of mortar containing deicing salt solution10.1617/s11527-016-0964-8 ↗
14. Frost action in cement in the presence of De-Icers10.1016/0008-8846(76)90097-1 ↗
15. A working hypothesis for further studies of frost resistance of concrete
16. Water Absorption and critical degree of saturation relating to freeze-thaw damage in concrete pavement joints10.1061/(ASCE)MT.1943-5533.0000383 ↗
17. The influence of calcium chloride deicing salt on phase changes and damage development in cementitious materials10.1016/j.cemconcomp.2015.09.006 ↗
18. Damage development in cementitious materials exposed to magnesium chloride deicing salt10.1016/j.conbuildmat.2015.06.004 ↗
19. Measuring freeze and thaw damage in mortars containing deicing salt using a low-temperature longitudinal guarded comparative calorimeter and acoustic emission
20. Time-dependent reliability of deteriorating reinforced concrete bridge decks10.1016/S0167-4730(97)00021-0 ↗
21. Numerical analysis of the freeze-thaw performance of cementitious composites that contain phase change material (PCM)10.1016/j.matdes.2018.02.056 ↗
22. Modeling evolution of frost damage in fully saturated porous materials exposed to variable hygro-thermal conditions10.1016/j.cma.2015.08.015 ↗
23. Mesoscale models for concrete: homogenisation and damage behaviour10.1016/j.finel.2005.11.008 ↗
24. A description of micro- and macroscale damage of concrete structures10.1016/0013-7944(86)90036-6 ↗
25. From damage to fracture mechanics and conversely: a combined approach10.1016/0020-7683(96)00015-7 ↗
26. Mesoscale modelling of crack-induced diffusivity in concrete10.1007/s00466-014-1105-2 ↗
27. Steel reinforcement corrosion in concrete under combined actions: The role of freeze-thaw cycles, chloride ingress, and surface impregnation10.1016/j.conbuildmat.2017.05.078 ↗
28. A numerical study on chloride diffusion in freeze-thaw affected concrete10.1016/j.conbuildmat.2018.05.209 ↗
29. S. Das, A. Maroli, N. Neithalath, Micromechanical Modeling for Material Design of Durable Infrastructural Materials: The Influence of Aggregate and Matrix Modification on Elastic Behavior of Mortars, International Conference on Durability of Concrete Structures. (2016).10.5703/1288284316125 ↗
30. A thermal periodic boundary condition for heating and cooling processes10.1016/j.ijheatfluidflow.2006.03.023 ↗
31. Numerical homogenization of concrete microstructures without explicit meshes10.1016/j.cemconres.2011.03.023 ↗
32. Overall behaviour of heterogeneous elastoviscoplastic materials: effect of microstructural modelling10.1016/S0167-6636(00)00019-3 ↗
33. A note on the generation of periodic granular microstructures based on grain size distributions10.1002/nag.635 ↗
34. Disks vs. spheres: Contrasting properties of random packings10.1007/BF01048304 ↗
35. Geometric properties of random disk packings10.1007/BF01025983 ↗
36. How to simulate billiards and similar systems10.1016/0021-9991(91)90222-7 ↗
37. A microstructure-guided numerical approach to evaluate strain sensing and damage detection ability of random heterogeneous self-sensing structural materials10.1016/j.commatsci.2018.09.035 ↗
38. A microstructure-guided constitutive modeling approach for random heterogeneous materials: Application to structural binders10.1016/j.commatsci.2016.03.040 ↗
39. Microstructure-guided numerical simulations to predict the thermal performance of a hierarchical cement-based composite material10.1016/j.cemconcomp.2017.12.003 ↗
40. Effective properties of a fly ash geopolymer: Synergistic application of X-ray synchrotron tomography, nanoindentation, and homogenization models10.1016/j.cemconres.2015.08.004 ↗
41. The influence of microencapsulated phase change material (PCM) characteristics on the microstructure and strength of cementitious composites: experiments and finite element simulations10.1016/j.cemconcomp.2016.06.018 ↗
42. Control of air content in concrete
43. S. Minapoor, S. Ajeli, M.J. Toghchi, Simulation of Non-Crimp 3D Orthogonal Carbon Fabric Composite for Aerospace Applications Using Finite Element Method, 9 (2015) 9.
44. Rubitherm GmbH, (n.d.). https://www.rubitherm.eu/en/index.php/productcategory/mikroverkapselung (accessed March 28, 2019).
45. Experimental and numerical studies of hybrid PCM embedded in plastering mortar for enhanced thermal behaviour of buildings | Elsevier Enhanced Reader10.1016/j.energy.2015.10.131 ↗
46. Measurements of Thermal Gradients and their Effects on Segmental Concrete Bridge10.1061/(ASCE)1084-0702(2002)7:3(166) ↗
47. Thermal actions for concrete bridge design10.1061/(ASCE)0733-9445(1993)119:8(2313) ↗
48. National Oceanic and Atmospheric Administration, (2018). http://www.noaa.gov/ (accessed May 24, 2018).
49. Temperature boundary condition models for concrete bridge members
50. ASTM Standard, C680-10, Standard practice for estimate of the heat gain or loss and the surface temperatures of insulated flat, cylindrical and spherical systems by use of computer programs, in: ASTM Standard, C680-10, Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical and Spherical Systems by Use of Computer Programs, n.d.
51. Microstructure-guided numerical simulation to evaluate the influence of phase change materials (PCMs) on the freeze-thaw response of concrete pavements10.1016/j.conbuildmat.2018.12.199 ↗
52. Stress analysis of concrete structures subjected to variable thermal loads10.1061/(ASCE)0733-9445(1995)121:3(446) ↗
53. Modeling the deterioration of hydrated cement systems exposed to frost action: Part 1: description of the mathematical model10.1016/S0008-8846(00)00405-1 ↗
54. Interfacial transition zone in concrete10.1016/1065-7355(95)90037-3 ↗
55. Influence of internal curing using lightweight aggregates on interfacial transition zone percolation and chloride ingress in mortars10.1016/j.cemconcomp.2009.03.001 ↗
56. How to consider the Interfacial Transition Zones in the finite element modelling of concrete?10.1016/j.cemconres.2014.01.009 ↗
57. Mesoscale simulation of deformation for mortar and concrete under cyclic freezing and thawing stress10.3151/jact.13.291 ↗
58. The effect of two types of C-S-H on the elasticity of cement-based materials: Results from nanoindentation and micromechanical modeling10.1016/S0008-8846(03)00230-8 ↗
59. A. Neville, Properties of concrete, 1995.
60. Poroelastic model for concrete exposed to freezing temperatures10.1016/j.cemconres.2007.06.006 ↗
61. Continuum damage theory-application to concrete
62. Numerical homogenization of hardened cement paste10.1007/s00466-007-0211-9 ↗
63. M. Hasan, T. Ueda, Stress-Strain Relationship of Frost-Damaged Concrete Subjected to Fatigue Loading, | Journal of Materials in Civil Engineering. Vol 20, No 1 (2008). https://ascelibrary.org/doi/abs/10.1061/(ASCE)0899-1561(2008)20:1(37) (accessed June 2, 2018).10.1061/(ASCE)0899-1561(2008)20:1(37) ↗
64. Structural reliability of concrete bridges including improved chloride-induced corrosion models10.1016/S0167-4730(00)00018-7 ↗
65. Chloride-induced corrosion of reinforced concrete bridge decks10.1016/S0008-8846(01)00644-5 ↗
66. Broomfield · 2003
67. Multiscale diffusion–thermal–mechanical cohesive zone model for concrete10.1007/s00466-015-1149-y ↗
68. A numerical method for the chloride diffusivity in concrete with aggregate shape effect10.1016/j.conbuildmat.2011.12.061 ↗
69. Three-phase modelling of electrochemical chloride removal from corroded steel-reinforced concrete10.1016/j.conbuildmat.2014.08.003 ↗
70. Penetration of Chloride Ions into Cement Pastes and Concretes10.1111/j.1151-2916.1972.tb13424.x ↗
71. P. Hoffman R. Weyers Predicting critical chloride levels in concrete bridge decks 1994 in: Rotterdam 957 959
72. Factors influencing chloride transport in concrete structures exposed to marine environments10.1016/j.cemconcomp.2007.09.005 ↗
73. Haldar · 2000