Freezing and thawing resistance of MKPC paste under different corrosion solutions
Source abstract
Abstract
Abstract This paper investigates the resistance to freezing and thawing of magnesium potassium phosphate cement (MKPC) containing limestone (LS) and silica fume (SF) exposed to water, 3.5% sodium chloride solution and 5% sodium sulfate solution compared with that of pure MKPC paste. The deterioration including compressive strength and flexural strength, weight loss, deformation and water absorption were evaluated through freeze-thaw tests. To identify the products formed under the coupling effect, the phase compositions and morphologies of hardened MKPC specimens were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM-EDS) and thermal analysis (TG). The results indicated that the rate of deterioration in MKPC was significantly dependent on the types of solutions. As for MKPC paste without any admixture, its deterioration by 5% sodium sulfate solution showed the most aggressive corrosion subjected to 400 freeze-thaw cycles. However the addition of limestone powder and silica fume led to significant improvement in the resistance of MKPC paste exposed to combined solution attack and freezing-thawing and especially in sulfate solution. The minimum strength residual ratio was more than 85% and the weight losses were all below 5% after 400 times of freeze-thaw cycles in three kinds of solutions, the volume deformation and external damage was also improved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. The chemical composition of mortars made from magnesia-phosphate cement10.1016/0008-8846(88)90075-0 ↗
2. Wagh · 2004
3. Rapid setting magnesium phosphate cement for quick repair of concrete pavements-characterisation and durability aspects10.1016/0008-8846(93)90090-V ↗
4. Properties and applications of magnesia-phosphate cement mortar for 445 rapid repair of concrete10.1016/S0008-8846(00)00419-1 ↗
5. Recent Progress in Chemically Bonded Phosphate Ceramics, Hindawi Publishing Corporation
6. Sulfate resistance of high-performance concrete10.1016/S0958-9465(02)00049-5 ↗
7. Damage evolution in cement mortar due to erosion of sulphate10.1016/j.corsci.2008.05.021 ↗
8. Deicer-scaling resistance of phosphate cement-based binder for rapid repair of concrete10.1016/S0008-8846(01)00651-2 ↗
9. Chemical durability investigation of magnesium phosphosilicate cement
10. Research on resistance of magnesia-phosphate cement to chloride ion erosion
11. Study on water resistance of magnesium phosphate cement
12. Research on preparation and properties of marine magnesium phosphate cement based materials
13. Effects of fly ash and quartz sand on water-resistance and salt-resistance of magnesium phosphate cement10.1016/j.conbuildmat.2015.12.154 ↗
14. The effect of seawater curing on properties of magnesium potassium phosphate cement10.1016/j.conbuildmat.2017.02.057 ↗
15. Effect of curing regime on water resistance of magnesium–potassium phosphate cement10.1016/j.conbuildmat.2017.06.056 ↗
16. Magnesium potassium phosphate cement paste: degree of reaction, porosity and pore structure10.1016/j.cemconres.2014.07.012 ↗
17. Influence of magnesia-to-phosphate molar ratio on microstructures, mechanical properties and thermal conductivity of magnesium potassium phosphate cement paste with large water-to-solid10.1016/j.cemconres.2014.10.019 ↗
18. Effects of water content, magnesia-to-phosphate molar ratio and age on pore structure, strength and permeability of magnesium potassium phosphate cement paste10.1016/j.matdes.2014.07.073 ↗
19. Potential to design magnesium potassium phosphate cement paste based on an optimal magnesia-to-phosphate ratio10.1016/j.matdes.2017.01.012 ↗
20. Influence of fly ash on compressive strength and micro-characteristics of magnesium potassium phosphate cement mortars10.1016/j.cemconres.2017.05.008 ↗
21. Potential large-volume beneficial use of low-grade fly ash in magnesia-phosphate cement based materials10.1016/j.fuel.2017.08.028 ↗
22. Yang, Hydration and hardening characteristics of potassium magnesium phosphate cement paste containing composite retarders
23. Microstructure of magnesium potassium phosphate cement10.1016/j.conbuildmat.2010.12.035 ↗
24. Influence of magnesia surface on the setting time of magnesia-phosphate cements10.1016/S0008-8846(01)00647-0 ↗
25. Mechanisms of deicer-frost scaling of concrete (Ⅰ)——capillary-uptake degree of saturation and ice-formation pressure
26. One of mechanisms on the deicer-frost scaling of concrete (Ⅱ): degree of saturation and ice-formation pressure during freezing-thawing cycles
27. Effect of limestone powder on the water stability of magnesium phosphate cement-based materials10.1016/j.conbuildmat.2017.04.207 ↗
28. Dehydration characteristics of struvite-K pertaining to magnesium potassium phosphate cement system in non-isothermal condition10.1007/s10973-011-2170-9 ↗
29. Effect of silica fume and basalt fiber on the mechanical properties and microstructure of magnesium phosphate cement (MPC) mortar10.1016/j.conbuildmat.2018.09.143 ↗
30. Sulfate resistance of limestone cement concrete exposed to combined chloride and sulfate environment at low temperature10.1016/j.cemconcomp.2012.05.006 ↗