journal article·2019-09

Innovative warp and woof strap (WWS) method to anchor the FRP sheets in strengthened concrete beams

Davood Mostofinejad, Seyed Mohammad Hosseini, Bahareh Nader Tehrani, Mohammad Reza Eftekhar, Mohsen Dyari

Publisher page

Abstract

Abstract U-shaped straps are an effective means to postpone premature debonding failure when fiber-reinforced polymer (FRP) composites are applied in structures. However, the U-wrap anchors are not cost-effective and in many cases cannot completely prevent the debonding phenomenon. In the current study, an innovative technique named “warp and woof strap” (WWS) is introduced for anchoring longitudinal FRP sheets, in which some parts of FRP fibers are manually made bi-directionally. Unlike the conventional U-shaped anchors, the anchorage system in this method is in direct contact with the tension side of the beam. Totally, 20 reinforced concrete (RC) beams, 120 × 160 × 1400 mm in size, were subjected to the four-point loading to evaluate the efficiency of the introduced anchorage system in comparison to the U-shaped anchorage. The effect of different parameters including the method employed for anchoring the longitudinal carbon fiber reinforced polymer (CFRP) sheet, anchorage height and width, location of FRP anchorage application, use of the corner strip and rounding corner method, and configuration of WWS anchorage were investigated. The experimental results indicated that the efficiency of the WWS method in preventing undesired debonding mode of failure is much better than that of conventional U-shaped anchor. It was also observed that using WWS method can improve the load carrying capacity and ductility up to 32% and 80%, respectively, compared to U-shaped anchors.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Fiber-reinforced polymer composites for construction—State-of-the-art review10.1061/(ASCE)1090-0268(2002)6:2(73) ↗
2. Key issues in the use of fibre reinforced polymer (FRP) composites in the rehabilitation and retrofitting of concrete structures
3. Control of corrosion-induced damage in reinforced concrete beams using carbon fiber-reinforced polymer laminates10.1061/(ASCE)1090-0268(2005)9:2(195) ↗
4. Analysis of the fatigue behavior of reinforced concrete beams strengthened in flexure with fiber reinforced polymer laminates10.1016/j.compositesb.2016.04.014 ↗
5. Experimental study of moment redistribution in RC frames strengthened with CFRP sheets10.1016/j.compstruct.2010.10.004 ↗
6. Response of CFRP-strengthened beams under fatigue with different load amplitudes10.1016/j.conbuildmat.2006.06.019 ↗
7. Bond efficiency of EBR and EBROG methods in different flexural failure mechanisms of FRP strengthened RC beams10.1016/j.conbuildmat.2014.01.002 ↗
8. Experimental study on rehabilitation of corrosion-damaged reinforced concrete beams with carbon fiber reinforced polymer10.1016/j.conbuildmat.2012.09.023 ↗
9. Grooving as alternative method of surface preparation to postpone debonding of FRP laminates in concrete beams10.1061/(ASCE)CC.1943-5614.0000117 ↗
10. Externally bonded reinforcement in grooves (EBRIG) technique to postpone debonding of FRP sheets in strengthened concrete beams10.1016/j.conbuildmat.2012.09.030 ↗
11. Theoretical solution to fatigue bond stress distribution of NSM FRP reinforcement in concrete10.1016/j.compositesb.2016.06.025 ↗
12. Fatigue life-based design of RC beams strengthened with NSM FRP10.1016/j.engstruct.2017.02.065 ↗
13. Effect of patch repair and strengthening with EBR and NSM CFRP laminates for RC beams with low, medium and heavy corrosion10.1016/j.compositesb.2017.09.029 ↗
14. Experimental investigation into bond behavior of FRP-to-concrete under mixed-mode I/II loading10.1016/j.conbuildmat.2016.11.057 ↗
15. Experimental Investigation of the Efficacy of EBROG Method in Seismic Rehabilitation of Deficient Reinforced Concrete Beam-Column Joints Using CFRP Sheets10.1061/(ASCE)CC.1943-5614.0000781 ↗
16. Flexural strengthening of reinforced concrete beam-column joints using innovative anchorage system10.14359/51700953 ↗
17. Efficiency of grooving method used for deficient RC beam-column joints seismically rehabilitated with CFRP sheets
18. 3D beam–column corner joints retrofitted with X-shaped FRP sheets attached via the EBROG technique10.1016/j.engstruct.2019.01.038 ↗
19. Effect of GM patterns on ductility and debonding control of FRP sheets in RC strengthened beams10.1016/j.conbuildmat.2015.05.062 ↗
20. Experimental study of circular RC columns strengthened with longitudinal CFRP composites under eccentric loading: Comparative evaluation of EBR and EBROG methods10.1061/(ASCE)CC.1943-5614.0000618 ↗
21. Slenderness effects in circular RC columns strengthened with CFRP sheets using different external bonding techniques10.1061/(ASCE)CC.1943-5614.0000908 ↗
22. Effect of transverse groove on bond behavior of FRP-concrete interface: experimental study, image analysis and design10.1016/j.compositesb.2018.10.072 ↗
23. Epoxy interlocking: a novel approach to enhance FRP-to-concrete bond behavior10.1016/j.conbuildmat.2018.10.183 ↗
24. Strength and ductility of RC beams repaired with bonded CFRP laminates10.1061/(ASCE)1084-0702(2001)6:5(349) ↗
25. Bond and force transfer of composite-material plates bonded to concrete
26. CNR-DT 200/2004, Guide for the design and construction of externally bonded FRP systems for strengthening existing structures, National Research Council, Rome, Italy, 2004.
27. fib Bulletin 14 2001, Externally bonded FRP reinforcement for RC structures. Fédération Internationale du Béton, Lausanne, Switzerland, 2001.
28. ACI 440.2R-17. Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. ACI Committee 440, American Concrete Institute. Farmington Hills, Michigan, USA, 2017.
29. JSCE-2001. Recommendations for upgrading of concrete structures with use of continuous fiber sheets. Japan Society of Civil Engineers, Concrete Engineering Series, Tokyo, Japan, 2001.
30. TR55:2004. Design guidance for strengthening concrete structures using fiber composite materials. Concrete Society Technical Report No. 55, United Kingdom, 2004.
31. CECS 146:2003. Technical specification for strengthening concrete structures with carbon fiber reinforced polymer laminate. Beijing: China Planning Press; 2003.
32. Investigation into bond behaviour of a new CFRP anchorage system for concrete utilising a mechanically strengthened substrate10.1016/j.compstruct.2010.04.004 ↗
33. Debonding strength and anchorage devices for reinforced concrete elements strengthened with FRP sheets10.1016/j.compositesb.2007.05.002 ↗
34. Shear strengthening of RC T-beams using mechanically anchored unbonded dry carbon fiber sheets10.1061/(ASCE)CF.1943-5509.0000067 ↗
35. Analysis of RC beams strengthened with mechanically fastened FRP (MF-FRP) strips10.1016/j.compstruct.2005.12.001 ↗
36. Bond behavior of CFRP sheets attached to concrete through EBR and EBROG joints subject to mixed-mode I/II loading10.1061/(ASCE)CC.1943-5614.0000816 ↗
37. A generic non-linear bond-slip model for CFRP composites bonded to concrete substrate using EBR and EBROG techniques
38. Empirical FRP-concrete bond strength model for externally bonded reinforcement on grooves10.1061/(ASCE)CC.1943-5614.0000924 ↗
39. Experimental evaluation of CFRP-concrete bond behavior under high loading rates using particle image velocimetry method10.1061/(ASCE)CC.1943-5614.0000933 ↗
40. Application of improved hybrid bonded FRP technique to FRP debonding prevention10.1016/j.conbuildmat.2010.12.033 ↗
41. Review of anchorage systems for externally bonded FRP laminates10.1007/s40069-013-0029-0 ↗
42. Finite element simulation and parametric study of anchored fiber-reinforced polymer sheets10.14359/51701094 ↗
43. Anchorage devices used to improve the performance of reinforced concrete beams retrofitted with FRP composites: State-of-the-art review10.1061/(ASCE)CC.1943-5614.0000276 ↗
44. Increasing flexural capacity of reinforced concrete beams using carbon fiber-reinforced polymer composites
45. Mitigation of intermediate crack debonding in FRP-plated RC beams using FRP U-jackets10.1016/j.compstruct.2017.05.049 ↗
46. Flexural strengthening of RC beams with externally bonded CFRP systems: test results and 3D nonlinear FE analysis10.1061/(ASCE)1090-0268(2008)12:2(190) ↗
47. Flexural strengthening of RC beams with prestressed CFRP sheets: development of nonmetallic anchor systems10.1061/(ASCE)1090-0268(2008)12:1(35) ↗
48. Effectiveness of U-shaped CFRP wraps as end anchorages in predominant flexure and shear region
49. Prediction models for debonding failure loads of carbon fiber reinforced polymer retrofitted reinforced concrete beams10.1061/(ASCE)1090-0268(2006)10:1(48) ↗
50. Investigation into CFRP plate end anchorage utilising uni-directional fabric wrap10.1016/j.compstruct.2010.07.012 ↗
51. Experimental study of flexural behaviour of RC beams strengthened by longitudinal and U-shaped basalt FRP sheet10.1016/j.compositesb.2017.09.053 ↗
52. Enhancing the debonding strain limit for CFRP-strengthened RC beams using U-clamps: Identification of design parameters10.1061/(ASCE)CC.1943-5614.0000599 ↗
53. An efficiency framework for anchorage devices used to enhance the performance of FRP strengthened RC members10.1016/j.conbuildmat.2018.10.022 ↗
54. Anchors for CFRP plates: State-of-the-art review and future potential10.1016/j.compositesb.2016.01.011 ↗
55. Innovative strengthening schemes of concrete cantilever beams using CFRP sheets: end anchorage effect10.1016/j.conbuildmat.2018.09.147 ↗
56. Flexural performance of FRP-plated RC beams using H-type end anchorage10.1016/j.compstruct.2018.08.015 ↗
57. Peeling behaviour of reinforced concrete beams strengthened with CFRP plates under various end restraint conditions10.1680/macr.2004.56.2.73 ↗
58. Performance of FRP-strengthened RC beams with different concrete surface profiles10.1061/(ASCE)1090-0268(2008)12:6(626) ↗
59. Inclined FRP U-jackets for enhancing structural performance of FRP-plated RC beams suffering from IC debonding10.1016/j.compstruct.2018.05.074 ↗
60. ACI 318-14. Building Code Requirements for Structural Concrete and Commentary. ACI Committee 318, American Concrete Institute. Farmington Hills, Michigan, USA, 2014.
61. R. Park, Ductility evaluation from laboratory and analytical testing, Proceedings of the 9th world conference on earthquake engineering, Tokyo-Kyoto, Japan, 1988, pp. 605-616.
62. Evaluation of ductility of structures and structural assemblages from laboratory testing10.5459/bnzsee.22.3.155-166 ↗
63. ASCE/SEI, 41-17. Seismic Evaluation and Retrofit of Existing Buildings. ASCE Standard, American Society of Civil Engineers, 2017.
64. Ductility and cracking behavior of prestressed concrete beams strengthened with prestressed CFRP sheets10.1061/(ASCE)1090-0268(2008)12:3(274) ↗
65. Evaluating and proposing models of predicting IC debonding failure10.1061/(ASCE)1090-0268(2008)12:3(284) ↗
66. Intermediate crack debonding in FRP-strengthened RC beams: FE analysis and strength model10.1061/(ASCE)1090-0268(2007)11:2(161) ↗
67. Intermediate crack-induced debonding in RC beams and slabs10.1016/S0950-0618(03)00043-6 ↗
68. J. Teng, X. Lu, L. Ye, J. Jiang, Recent research on intermediate crack debonding in FRP-strengthened RC beams, (2004).