journal article·2019-10

Gainful utilization of dimensional limestone waste as fine aggregate in cement mortar mixes

Harshwardhan Singh Chouhan, Pawan Kalla, Ravindra Nagar, Pradeep Kumar Gautam

Publisher page

Abstract

Abstract The present study was undertaken to evaluate the potential of dimensional limestone waste (DLW), generated during cutting and polishing activity, as fine aggregate in mortar mixes. For this, the generated waste was used in two forms, first as slurry and second as manufactured sand. A total of fourteen mortar mixes (volumetric ratio 1:3 and 1:6) were prepared by replacing conventional fine aggregates (river sand) between 0 and 60% with dimensional limestone slurry (DLSS) and manufactured dimensional limestone crushed sand (DLCS). These mortar mixes were evaluated on the basis of workability, compressive, flexural, adhesive and tensile bond strengths, drying shrinkage, water absorption, porosity, density, ultrasonic pulse velocity, and dynamic modulus of elasticity. A positive impact of DLW on strength properties of mortar mixes was observed between 20 and 60% replacement of conventional river sand. Use of DLW resulted in a much denser and homogeneous mixture, reducing water-cement ratio, and improving the workability of mortar. Using DLW as partial replacement of fine aggregate resulted into improved strength properties of mortar. However, above 20% replacement, the drying shrinkage of all mortar mixes increased continuously. Structural matrix of mortar mixes, analyzed by scanning electron microscopy (SEM) images, Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) substantiate the above results. Use of DLW as partial substitution of conventional river sand may help to conserve the non-renewable natural resources with alternative building material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Evaluation of strength and durability of lean mortar mixes containing marble waste10.1016/j.conbuildmat.2017.04.199 ↗
2. Sustainable use of waste in flexible pavement: a review10.1016/j.conbuildmat.2018.04.067 ↗
3. Investigating use of dimensional limestone slurry waste as fine aggregate in mortar
4. The effect of stone dust content in sand10.1016/0008-8846(94)90147-3 ↗
5. Utilization of industrial wastes and unprocessed micro-fillers for making cost effective mortars10.1016/j.conbuildmat.2005.06.009 ↗
6. The effect of fly ash and limestone fillers on the viscosity and compressive strength of self-compacting repair mortars10.1016/j.cemconres.2006.04.002 ↗
7. Use of limestone obtained from waste of the mussel cannery industry for the production of mortars10.1016/j.cemconres.2007.01.004 ↗
8. Limestone derived eggshell powder as a replacement in Portland cement mortar10.1016/j.conbuildmat.2015.07.103 ↗
9. Evolution of mechanical properties and drying shrinkage in lime-based and lime cement-based mortars with pure limestone aggregate10.1016/j.conbuildmat.2014.12.115 ↗
10. Utilization of marble powder as fine aggregate in mortar mixes10.1016/j.conbuildmat.2018.01.061 ↗
11. Characterization of marble powder for its use in mortar and concrete10.1016/j.conbuildmat.2009.08.013 ↗
12. Recycling of dimension limestone industry waste in concrete
13. Influence of marble and limestone dusts as additives on some mechanical properties of concrete
14. Strength and durability of concrete incorporating crushed limestone sand10.1016/j.conbuildmat.2008.02.005 ↗
15. P.V. Khandve, Concrete Paving Block using Kota Stone Industry Waste, in: International Conference on Science and Technology for Sustainable Development (ICSTSD), 2016, pp. 1–4.
16. Utilization of stone waste in the development of value added products: a state of the art review10.25103/jestr.073.29 ↗
17. Influence of limestone waste as partial replacement material for sand and marble powder in concrete properties10.1016/j.hbrcj.2012.10.005 ↗
18. IS-1489, Portland Pozzolanic Cement, 1489, 1991.
19. IS 2116: 1980, Specification for sand for masonary mortars, IS 2116: 1980, 1999.
20. IS 1542: 1992, Sand for Plaster – Specification, 1999.
21. IS 2116, Specification for Sand for Masonry Mortars, 1980.
22. ASTM C 642-06, Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, 2008. doi:10.1520/C0642-13.5.
23. Effect of partial and total replacement of siliceous river sand with limestone crushed sand on the durability of mortars exposed to chemical solutions10.1016/j.conbuildmat.2013.05.037 ↗
24. Incorporation of fine sanitary ware aggregates in coating mortars10.1016/j.conbuildmat.2015.03.028 ↗
25. Incorporation of fine concrete aggregates in mortars10.1016/j.conbuildmat.2012.06.031 ↗
26. Incorporation of fine glass aggregates in renderings10.1016/j.conbuildmat.2013.03.042 ↗
27. Properties of self-compacting mortar made with various types of sand10.1016/j.cemconcomp.2012.07.007 ↗
28. Mechanical behaviour and thermal conductivity of mortars containing waste rubber particles10.1016/j.matdes.2010.10.013 ↗
29. Structure and physical properties of hardened portland cement paste10.1111/j.1151-2916.1958.tb13494.x ↗
30. Impact assessment of lime additive and chemical admixtures on selected properties of mortars10.1016/j.proeng.2013.04.087 ↗
31. Incorporation of fine ceramics in mortars10.1016/j.conbuildmat.2007.10.014 ↗
32. Properties of mortars with fly ash as fine aggregate10.1016/j.conbuildmat.2015.05.095 ↗
33. Performance of sustainable concrete containing granite cutting waste10.1016/j.jclepro.2016.02.008 ↗
34. Studies on cement and mortar containing low-calcium fly ash, limestone, and dolomitic limestone10.1016/j.cemconcomp.2007.07.002 ↗
35. Physical-mechanical properties of mortars with addition of TiO2 nanoparticles10.1016/j.conbuildmat.2017.05.040 ↗
36. Effects of carbonated hardened cement paste powder on hydration and microstructure of Portland cement10.1016/j.conbuildmat.2018.07.159 ↗
37. Effect of magnesium sulfate on the durability of limestone mortars based on quaternary blended cements10.1016/j.cemconcomp.2015.10.020 ↗
38. Cement and concrete research hydration mechanisms of ternary Portland cements containing limestone powder and fly ash10.1016/j.cemconres.2010.11.014 ↗