journal article·2019-11

Experimental investigation on two new corn stalk biocomposites based on magnesium phosphate cement and ordinary Portland cement

Yongquan Wei, Chunyu Song, Bing Chen, Muhammad Riaz Ahmad

Publisher page

Abstract

Abstract This paper reports a comparative investigation of two new corn stalk (CS) biocomposites based on magnesium phosphate cement (MPC) and ordinary Portland cement (OPC). Two composites with identical corn stalk contents and different binders were prepared. The porosity, water absorption, drying kinetics, compressive strength and thermal properties of the biocomposites were measured. The experimental results show that the lower open porosity of the CS-MPC concrete results in lower water absorption and weaker evaporation performance. In addition, the open porosity and closed porosity play important roles in the effect of temperature on the thermal properties in the dry state and moist state. The dry and moist thermal conductivities of CS-MPC concrete is slightly higher than that of the CS-OPC concrete, which can meet the thermal insulation requirements. Due to the excellent bonding between the MPC binder and corn stalk plant aggregates, the compressive strength of CS-MPC concrete is significantly higher than that of CS-OPC concrete. These results indicate that MPC binder is more suitable for producing plant aggregate concrete.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Oxide Properties and Applications · Hygrothermal properties of building materials · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Does biomass energy consumption help to control environmental pollution? Evidence from BRICS countries10.1016/j.scitotenv.2019.03.268 ↗
2. A review of unconventional sustainable building insulation materials
3. U. SBCI · 2007
4. Influence of the setting process and the formulation on the drying of hemp concrete10.1016/j.conbuildmat.2011.12.030 ↗
5. Characterization of flax lime and hemp lime concretes: hygric properties and moisture buffer capacity10.1016/j.enbuild.2014.11.043 ↗
6. Cement-bonded composites from lignocellulosic wastes10.1016/j.conbuildmat.2010.02.003 ↗
7. Utilization of hemp concrete using hemp shiv as coarse aggregate with aluminium sulfate [Al2(SO4)3] and hydrated lime [Ca(OH)2] treatment10.1016/j.conbuildmat.2017.08.181 ↗
8. Preliminary study of the mechanical and hygrothermal properties of hemp-magnesium phosphate cements10.1016/j.conbuildmat.2015.12.081 ↗
9. Improvement of mechanical properties of green concrete by treatment of the vegetals fibers10.1016/j.conbuildmat.2013.05.073 ↗
10. Hygric buffer and acoustic absorption of new building insulation materials based on date palm fibers10.1016/j.jobe.2017.05.011 ↗
11. Experimental investigation concrete using magnesium phosphate cement, fly ash, and rape stalk
12. Performance of straw bale wall: a case of study10.1016/j.enbuild.2011.04.001 ↗
13. Straw bale based constructions: measurement of effective thermal transport properties10.1016/j.conbuildmat.2018.11.256 ↗
14. Utilization of the black tea powder as multifunctional admixture for the hemihydrate gypsum10.1016/j.jclepro.2018.10.304 ↗
15. Effects of corn stalk fiber content on properties of biomass brick10.1016/j.conbuildmat.2016.09.141 ↗
16. Corn stalk from agricultural residue used as reinforcement fiber in fiber-cement production10.1016/j.indcrop.2012.08.034 ↗
17. Development of a new bio-composite for building insulation and structural purpose using corn stalk and magnesium phosphate cement10.1016/j.enbuild.2018.06.007 ↗
18. Development of a sustainable and innovant hygrothermal bio-composite featuring the enhanced mechanical properties10.1016/j.jclepro.2019.05.002 ↗
19. The effects of expanded perlite aggregate, silica fume and fly ash on the thermal conductivity of lightweight concrete
20. A fractal approach to determine thermal conductivity in cement pastes10.1016/j.conbuildmat.2014.10.016 ↗
21. Thermal and structural properties of a hemp–lime biocomposite
22. Influence of mineral admixtures on thermal conductivity and compressive strength of mortar10.1016/S0378-7788(02)00052-X ↗
23. Upcycling carbon dioxide to improve mechanical strength of Portland cement10.1016/j.jclepro.2018.06.120 ↗
24. Effect of triethanolamine hydrochloride on the performance of cement paste10.1016/j.conbuildmat.2018.12.124 ↗
25. Effects of nano-SiO2 on early strength and microstructure of steam-cured high volume fly ash cement system10.1016/j.conbuildmat.2018.10.214 ↗
26. Experimental study of parameters influencing mechanical properties of hemp concretes10.1016/j.conbuildmat.2011.07.052 ↗
27. Studying the hardening and mechanical performances of rice husk and hemp–based building materials cured under natural and accelerated carbonation10.1016/j.conbuildmat.2015.06.032 ↗
28. Mechanical properties of lime–hemp concrete containing shives and fibres10.1016/j.biosystemseng.2009.02.005 ↗
29. Hemp Thermal insulation concrete with alternative binders, analysis of their thermal and mechanical properties10.1088/1757-899X/96/1/012029 ↗
30. Influence of the type of binder on the properties of lime-hemp concrete10.1007/978-94-007-7790-3_61 ↗
31. ASTM International, Standard test method for electrical indication of concrete’s ability to resist chloride ion penetration, Annual Book of ASTM Standards, ASTM C1202, West Conshohocken, PA, 2002.
32. BS EN1925:1999 · 1999
33. BS EN 12087:2013 · 2013
34. Hygric properties and thermal conductivity of a new insulation material for building based on date palm concrete10.1016/j.conbuildmat.2017.08.025 ↗
35. BS EN 12390-3:2009 · 2009
36. ASTM International, Standard test method for determination of thermal conductivity of soil and soft rock by thermal needle probe procedure, Annual book of ASTM standards, ASTM D5334–08, West Conshohocken, PA, 2008.
37. Chamoin · 2013
38. Comparison of the hygric behaviour of three hemp concretes10.1016/j.enbuild.2013.03.010 ↗
39. Porous structure and water vapour sorption of hemp based materials10.1016/j.conbuildmat.2007.01.018 ↗
40. Moisture transfer and thermal properties of hemp-lime concretes10.1016/j.conbuildmat.2014.04.081 ↗
41. Microstructure modification of cement mortars: effect on capillarity and frost-resistance10.1016/j.conbuildmat.2013.10.091 ↗
42. Blended pastes of cement and lime: pore structure and capillary porosity10.1016/j.apsusc.2005.10.019 ↗
43. The rate of drying of solid materials10.1021/ie50137a021 ↗
44. Effect of compaction on mechanical and thermal properties of hemp concrete10.1080/19648189.2010.9693246 ↗
45. Mechanical properties and durability of hemp-lime concretes10.1016/j.conbuildmat.2014.02.065 ↗
46. Lime-hemp composites: compressive strength and résistance to fungal attacks. MEng dissertation, recalled in Appendix 1: resistance to compression and stress-strain properties
47. The thermal conductivity of fluid air10.1063/1.555749 ↗
48. Standard reference data for the thermal conductivity of water10.1063/1.555963 ↗
49. Radiative and conductive heat transfer in porous media: estimation of the effective thermal conductivity10.1063/1.352387 ↗
50. Effective of thermal conductivity of moistened insulation materials as a function of temperature10.1016/j.ijheatmasstransfer.2007.05.005 ↗
51. The Cheng-Minkowycz problem for cellular porous materials: effect of temperature-dependent conductivity arising from radiative transfer10.1016/j.ijheatmasstransfer.2010.02.042 ↗
52. Characterization of hygrothermal properties of wood-based products – impact of moisture content and temperature10.1016/j.conbuildmat.2014.04.014 ↗
53. Functional classification of lightweight concretes
54. Experimental study on the thermal properties of lightweight aggregate concretes at different moisture contents and ambient temperatures10.1016/j.conbuildmat.2017.06.087 ↗
55. Quartz: heat capacities from 340 to 1000 K and revised values for the thermodynamic properties
56. Properties and structure of vitreous silica I10.1016/0022-3093(70)90190-0 ↗
57. Roberson · 1988
58. Interpolation correlations for fluid properties of humid air in the temperature range 100 °C to 200 °C10.1063/1.555998 ↗
59. Moisture content influence on the thermal conductivity and diffusivity of wood–concrete composite10.1016/j.conbuildmat.2013.06.067 ↗