Influence of the rope effect on the slip curve of laterally loaded, nailed and screwed timber-to-timber connections
Source abstract
Abstract
Abstract Timber-to-timber connections with different types of screws and nails were experimentally investigated with the aim to quantify the contribution of their axial resistance to their slip and their lateral load bearing capacity, which is the so-called rope effect in dowel-type timber connections. Five different types of screws, including partly threaded and double-threaded screws, as well as three types of nails, including smooth round nails, twisted square-sectioned and grooved nails, were used in the experimental investigations in order to cover a broad range of axial resistance of fasteners. Their behavior was tested in single shear and double shear timber-to-timber connections. In addition to connection testing, system and material properties were experimentally determined. This gave input to design equations and allowed for a comparison of the mechanical model in the European design standard for timber structures, Eurocode 5, with experiments. Experiments indicate that the initial slip modulus in the quasi-elastic domain is not influenced by withdrawal capacity of the fastener, while it shows pronounced influence on load-carrying capacity and the nonlinear shape of the slip curve of the connection at larger deformations. Rope effect strongly depends on fastener properties. High axial resistance of fasteners leads to highly non-linear slip curves and design equations tended to underestimate strength including the rope effect up to a displacement limit of 15 mm. Experimentally observed failure modes were well in line with the theoretical failure modes predicted by the design model. The provided experimental results are motivation for improvement of design models and development of analytical and numerical models that account for nonlinear effects in the complex load transfer mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Wood Treatment and Properties · Tree Root and Stability Studies · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Reinforcement of dowel type connections10.1016/j.conbuildmat.2015.05.088 ↗
2. Blass · 2017
3. Hilson · 1995
4. Theory of timber connections with slender dowel type fasteners10.1080/17480272.2016.1226382 ↗
5. EN 1995-1-1:2004 + AC:2006 + A1:2008 (2004) Eurocode 5: Design of timber structures - Part 1-1: General - common rules and rules for buildings. European Committee for Standardization (CEN), Bruxelles, Belgium.
6. Some structural design issues of the 14-storey timber framed building ’Treet’ in Norway10.1007/s00107-016-1022-5 ↗
7. Frühwald · 2007
8. Dorn · 2012
9. Tests on full-scale and static analysis models of the wood-framed building structure horizontally loaded10.3846/13923730.2017.1319411 ↗
10. Exploring a multi-modal experimental approach to investigation of local embedment behaviour of wood under steel dowels10.1111/str.12199 ↗
11. Investigation of crushing strength of spruce at various angles of grain
12. Theory of Timber Connections
13. I. Bejtka, H.J. Blass, Joints with inclined screws. Paper 35-7-4, CIB-W19 meeting 35, 2002, Kyoto, Japan.
14. Markwardt · 1952
15. Rodd · 1973
16. Siem · 1999
17. An experimental and numerical study of the effect of friction in single dowel joints10.1007/s00107-008-0267-z ↗
18. R. Lemaître, J.F. Bocquet, M. Schweigler, T.K. Bader, Beam-on-foundation modelling as an alternative design method for timber joints with dowel-type fasteners – Part 1: Strength and stiffness per shear plane of single-fastener joints. Paper 51-7-13, International Network on Timber Engineering Research, 5th meeting, Tallin, Estonia, 2018.
19. Integrative experimental characterization and engineering modeling of single-dowel connections in LVL10.1016/j.conbuildmat.2016.01.009 ↗
20. J. Jockwer, A. Jorissen Load-deformation behaviour and stiffness of lateral connections with multiple dowel type fasteners. Paper 51–07-7, International Network on Timber Engineering Research, 5th meeting, Tallinn, Estonia, 2018.
21. Blass · 2003
22. EN 383:2007, Timber structures – Test methods – Determination of embedment strength and foundation values for dowel type fasteners. European Committee for Standardization (CEN), Bruxelles, Belgium, 2007.
23. EN 1382:2016, Timber structures – Test methods – Withdrawal capacity of timber fasteners. European Committee for Standardization (CEN), Bruxelles, Belgium, 2016.
24. Porteaus · 2007
25. EN 338:2016. Structural timber – Strength Classes. European Committee for Standardization (CEN), Bruxelles, Belgium, 2016.
26. EN 26891:1999. Timber structures. Joints with mechanical fasteners. General principles for the determination of strength and deformation characteristics, European Committee for Standardization (CEN), Bruxelles, Belgium, 1999.
27. EN 409:2009, Timber structures - Test methods - Determination of the yield moment of dowel type fasteners, European Committee for Standardization (CEN), Bruxelles, Belgium, 2009.
28. DIN EN 1082, Design of timber structures – General rules and rules for buildings, DIN Deutsches Institut für Normung e.V., Berlin, in German, 2008.
29. Munch-Andersen · 2016
30. Bader · 2017
31. Jorissen · 1998