Analysis of viscous flow properties of styrene–butadiene–styrene-modified asphalt
Source abstract
Abstract
Abstract Three styrene–butadiene–styrene (SBS, a block copolymer) modified asphalt samples with 5% SBS by weight were prepared using three types of common base asphalt to analyze the viscosity and viscous flow properties of SBS-modified asphalts. Rotational viscosity tests were conducted under various temperature and shear rate conditions, and the effects of the test conditions on the viscosity of the base and modified asphalt samples were analyzed. The viscous activation energy ( E η ) and non-Newtonian index ( n ) were calculated using the Arrhenius equation and the power law equation, respectively. The temperature sensitivity and fluid properties were considered relative to E η and n , respectively, based on which master curves were established to predict viscosity. The results indicate that various types of base asphalt show inconsistent temperature sensitivity and fluid properties after SBS modification. SBS can improve the temperature stability of B# asphalt; however, it has adverse effects on the A# and C# asphalts. Compared with the base asphalt, the n values of the SBS-modified asphalts are all lower than 1, indicating that the asphalt is converted from a Newtonian to non-Newtonian fluid and the non-Newtonian properties of various types of asphalt vary with temperature. Master curves can describe the responses of the SBS-modified asphalt viscosity to test the conditions that adequately predict the viscosity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Morphology, rheology, and physical properties of polymer-modified asphalt binders10.1016/j.eurpolymj.2018.10.049 ↗
2. Overview of SEBS modified asphalt
3. A review of the fundamentals of polymer-modified asphalts: asphalt/polymer interactions and principles of compatibility10.1016/j.cis.2015.07.010 ↗
4. Analysis of viscous flow properties of asphalt in aging process10.1016/j.conbuildmat.2016.06.136 ↗
5. Application of aging methods to evaluate the long-term performance of road bases containing blast furnace slag materials10.1080/14680629.2014.907196 ↗
6. Investigation of aging performance of SBS modified asphalt with various aging methods10.1016/j.conbuildmat.2017.04.055 ↗
7. Effect of S/B block proportion on the phase behavior and rheology of SBS modified bitumen10.1080/10916466.2016.1237964 ↗
8. Rheological behaviors and microstructure of SBS/CR composite modified hard asphalt10.1016/j.conbuildmat.2016.04.057 ↗
9. Effect of Reactive Assistant on Rheological Properties of SBS Modified Bitumens
10. Rheological properties of asphalt binders modified with styrene-butadiene-styrene (SBS), ground tire rubber (GTR), or polyphosphoric acid (PPA)10.1016/j.conbuildmat.2017.06.115 ↗
11. Rheological properties of NOMMT/SBS composite modified asphalt
12. Analysis of viscosity and composition properties for crumb rubber modified asphalt10.1016/j.conbuildmat.2018.02.174 ↗
13. Microstructure of SBS modified asphalt based on viscosity data
14. Rheological evaluation of polymer-modified asphalt binders10.1590/S1516-14392008000300024 ↗
15. Analysis of physico-chemical properties for crumb rubber in process of asphalt modification10.1016/j.conbuildmat.2017.01.107 ↗
16. JTG E20-2011. Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering [S]. Beijing: China Communications Press, 2011 (in Chinese).