Monitoring and optimizing the surface roughness of high friction exposed aggregate cement concrete in exposure process
Source abstract
Abstract
Abstract Exposed aggregate cement concrete (EACCP) is a novel cement concrete, which has completely different roughness with the traditional cement concrete pavement since its roughness is formed by the exposure of the aggregate on the surface. A well-constructed EACCP can bring benefits to the road safety by improving its skid resistance. However, it is challengeable for user to control the exposing degree during the practical exposure process. This study aims to investigate the effect of exposure process on EACCP’s roughness and skid resistance. To this end, two groups of EACCP specimens with the most commonly used 4.75–9.5 mm single-sized and 4.75–16 mm continuously graded gradation are prepared, respectively. Specifically, the specimens are purpose-scrubbed to creat seven levels of scrubbing degree. In addition, the three-dimensional data on the specimen surface was obtained by a laser scanner, and the surface roughness of EACCP was jointly characterized via (1) height parameters: the arithmetical mean height Sa and root-mean-squared (RMS) height Sq; (2) feature parameters: the peak density Spd, the arithmetic mean peak curvature Spc, (3) the Power spectrum density (PSD), (4) a purpose-designed parameter aggregate exposed height, and (5) the mean texture depth (MTD) measured by the sand patch method. Furthermore, the skid resistance is investigated by the joint use of the British Portable Pendulum and Dynamic Friction tester. For obtaining a reliable evaluation result, the measurements are carried out with different testing speeds and water film depths. The data analysis indicates that the roughness parameters changed with exposing process significantly, in which a close relationship between a MTD and other parameters is evidently found. It is recommended to adopt MTD as the representative parameter for controlling and monitoring the scrubbing degree of EACCP to obtain a desirable roughness and better skid resistance. The results indicate that a EACCP could have a desirable skid resistance when its MTD is 0.72–0.80 mm. Results of this study contribute to the current knowledge by revealing the relationship between roughness parameters and skid resistance of EACCP, and providing a practical reference for exposing process, which may be of interest to road constructors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Infrastructure Maintenance and Monitoring · Asphalt Pavement Performance Evaluation · Tunneling and Rock Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. A.T. Papagiannakis, Pavement design and materials (2008).
2. The skid resistance of cement concrete pavement
3. J.E. Grady, W.P. Chamberlin, Groove depth requirements for tine-textured rigid pavement 5: Durability of tine texturing on PCC pavements (1981).
4. Comparison of skid resistance and noise between transverse and longitudinal grooving pavements in newly constructed concrete pavement10.4028/www.scientific.net/AMR.446-449.2637 ↗
5. Improving wet-weather runway performance using trapezoidal grooving design10.1007/s40890-015-0001-6 ↗
6. Qiu-mei · 2017
7. Research on the abrasion resistance of slipforming cement concrete pavement
8. Analog test study on abrasion of cement concrete pavement and attenuation of skid-resistant texture
9. A. Akkari, B. Izevbekhai, Composite pavements and exposed aggregate texturing at MnROAD: cells 70, 71 and 72 construction report and early performance evaluation (2012).
10. Effect of aggregate graining compositions on skid resistance of Exposed Aggregate Concrete pavement
11. Zhi-ling · 2001
12. Skid-resistance and noise-reducing characteristics of exposed-aggregate cement concrete pavement10.4028/www.scientific.net/AMR.1052.352 ↗
13. Hall · 2009
14. A state-of-the-art review of parameters influencing measurement and modeling of skid resistance of asphalt pavements10.1016/j.conbuildmat.2016.04.002 ↗
15. Characterization of road microtexture by means of image analysis10.1016/j.wear.2006.08.045 ↗
16. A study on the relationship between mean texture depth and mean profile depth of asphalt pavements10.1016/j.conbuildmat.2015.10.021 ↗
17. Evaluation and comparison of surface macrotexture and friction measuremnt methods10.3846/13923730.2012.746237 ↗
18. Daniel · 2015
19. Effect of three-dimensional macrotexture characteristics on dynamic frictional coefficient of asphalt pavement surface10.1016/j.conbuildmat.2016.09.088 ↗
20. Characterization of pavement texture by means of height difference correlation and relationtowetskid resistance
21. Development of portable tester for measuring skid resistance and its speed dependency on pavement surfaces10.1177/0361198196153600107 ↗
22. The influence of aggregate lithological nature on pavement texture polishing: A comparative investigation on a test site in Southern Italy10.1520/ACEM20160036 ↗
23. Asphalt pavements surface texture and skid resistance — exploring the reality10.1139/l11-109 ↗
24. Evaluation of pavement skid resistance using high speed texture measurement
25. ASTM. ASTM E965-15 Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique (2015).
26. An initial attempt to develop an empirical relation between texture and pavement friction using the HHT approach10.1016/j.wear.2013.11.015 ↗
27. Application of fractal analysis for measuring the effects of rubber polishing on the friction of asphalt concrete mixtures10.1016/j.wear.2014.08.013 ↗
28. Dunford · 2013
29. G. McQuaid, P. Millar, D. Woodward, et al., Use of close range photogrammetry to assess the micro-texture of asphalt surfacing aggregate: Proceedings of the International Journal of Pavements Conference - Maintenance and Rehabilitation of Pavements and Technological Control, Sao Paulo, Brazil, 2013.
30. Three-dimensional characterisation of surface texture for road stones undergoing simulated traffic wear10.1016/j.wear.2012.05.010 ↗
31. Macro- and micro-texture evolution of road pavements and correlation with friction10.1080/10298436.2014.937715 ↗
32. Quantifying aggregate microtexture with respect to wear—Case of New Zealand aggregates10.1016/j.wear.2014.11.028 ↗
33. Fractal and spectral analysis of aggregate surface profile in polishing process10.1016/j.wear.2011.05.024 ↗
34. Study of micro-texture and skid resistance change of granite slabs during the polishing with the Aachen Polishing Machine
35. I.A. Jasienski, Exposed aggregate concrete for the renonation of public spaces--technical sheet n° 20 of the FEBEL CEM DOSSIER CEMENT (1999).
36. Surhone · 2010
37. F. Blateyron, New 3D parameters and filtration techniques for surface metrology (2006).
38. Theory of rubber friction and contact mechanics10.1063/1.1388626 ↗
39. Quantitative characterization of surface topography using spectral analysis
40. An assessment of British pendulum based methods of skid resistance evaluation using schonfeld's photo-interpretation method
41. Influence of thin water film on skid resistance
42. Nippo Sangyo Co. L. Dynamic Friction Tester[EB/OL]. http://www.nippou.com/en/products/dft.html.
43. International A. ASTM E303-93(2013) Standard Test Method for Measuring Surface Frictional Properties Using the Brithish Pendulum Tester. West Conshohocken,PA[S]. West Conshohocken,PA: 2013.
44. International A · 2009
45. F. Mancosu, A. Parry, F. La Torre, Friction variation due to speed and water depth: Surf: Fourth International Symposium on Pavement Surface Characteristics on Roads & Airfields, Nantes, France, 2000.
46. Fractal evaluation of pavement skid resistance variations. I: Surface wetting10.1016/S0960-0779(97)00138-0 ↗
47. Skid resistance determination for pavement management and wet-weather road safety10.1016/j.ijtst.2017.08.001 ↗
48. Rizenbergs · 1968
49. Effect of surface macrotexture on skid resistance measurement by the brithish pendulum test
50. On the nature of surface roughness with application to contact mechanics, sealing, rubber friction and adhesion10.1088/0953-8984/17/1/R01 ↗
51. Pressure distributions beneath spherical and conical shapes pressed into a rubber plane, and their bearing on coefficients of friction under wet conditions10.1088/0370-1328/71/6/311 ↗
52. Relating surface texture parameters from close range photogrammetry to Grip-Tester pavement friction measurements10.1016/j.conbuildmat.2018.01.102 ↗
53. International experience and perspective of pavement texture measurement and evaluation