journal article·2020-05

Effects of plastic expansive agent on the fluidity, mechanical strength, dimensional stability and hydration of high performance cementitious grouts

Guofang Zhang, Dawei Qiu, Shunxiang Wang, Peiming Wang

Publisher page

Abstract

Abstract In this paper, the influences of plastic expansive agent (PEA) on the fluidity, mechanical strength, and dimensional stability of high-performance cementitious grouts were studied. The hydration of the grouts was also evaluated by XRD, TG-DSC and SEM analyses. The results show that with its dosage variation, PEA greatly affects the fluidity, mechanical strength, and dimensional stability of cementitious grout. PEA can bring slight fluidity decrease of the grout, with negligible influence of its dosage variation. PEA can improve the flexural strength and compressive strength at smaller dosages, while brings a dramatical decrease at higher dosages. With its dosage increasing, PEA greatly improves the vertical expansion rate, accordingly to assume grouts excellent early-aged dimensional stability, but brings the increase of the drying shrinkage. XRD, TG-DSC and SEM analyses indicate that PEA has negligible influence on the hydration of grouts, but may bring much denser and bigger hydrates and more pores in grouts to assume joint impact on properties. Consequently, there exists an optimum dosage range for PEA in cementitious grouts to ensure grouts with good fluidity, high strength and excellent dimensional stability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Grouting, Rheology, and Soil Mechanics · Drilling and Well Engineering · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Development of an injectable grout for concrete repair and strengthening10.1016/j.cemconcomp.2012.10.006 ↗
2. Characterisation of unidirectional fibre reinforced grout as a strengthening material for RC structures10.1016/j.conbuildmat.2017.01.131 ↗
3. Development of a lime based grout for cracks repair in earthen constructions10.1016/j.conbuildmat.2016.02.030 ↗
4. Assessment of phase formation in lime-based mortars with added metakaolin, Portland cement and sepiolite, for grouting of historic masonry10.1016/j.cemconres.2009.08.028 ↗
5. Development of grouts for consolidation of old renders10.1016/j.conbuildmat.2013.09.006 ↗
6. Unlocking the green opportunity for prefabricated buildings and construction in China10.1016/j.resconrec.2018.08.025 ↗
7. A comparative study of environmental performance between prefabricated and traditional residential buildings in China10.1016/j.jclepro.2015.04.120 ↗
8. Grouted sleeve connections used in precast reinforced concrete construction – experimental investigation of a column-to-column joint10.1016/j.engstruct.2016.09.021 ↗
9. Experimental bond behavior of deformed rebars in half-grouted sleeve connections with insufficient grouting defect10.1016/j.conbuildmat.2018.07.050 ↗
10. An investigation of rheological properties of cement-based grout mixed with rice husk ash (RHA)10.1016/j.conbuildmat.2015.05.025 ↗
11. Experimental study on performance of cement-based grouts admixed with fly ash, bentonite, superplasticizer and water glass10.1016/j.conbuildmat.2017.11.034 ↗
12. Taguchi approach for optimization of the bleeding on cement-based grouts10.1016/j.tust.2004.08.004 ↗
13. Basic rheological and mechanical properties of high-volume fly ash grouts10.1016/S0950-0618(02)00026-0 ↗
14. Compressive strength of masonry grout containing high amounts of class F fly ash and ground granulated blast furnace slag10.1016/j.conbuildmat.2015.07.115 ↗
15. Effect of mineral admixture types on the grout strength of fully-grouted rockbolts10.1016/j.conbuildmat.2017.04.046 ↗
16. On the rheology of using geopolymer for grouting: a comparative study with cement-based grout included fly ash and cold bonded fly ash10.1016/j.conbuildmat.2018.11.140 ↗
17. Grouting performance improvement for natural hydraulic lime-based grout via incorporating silica fume and silicon-acrylic latex10.1016/j.conbuildmat.2018.07.056 ↗
18. Fresh and hardened properties of steel fiber-reinforced grouts containing ground granulated blast-furnace slag10.1016/j.conbuildmat.2016.06.005 ↗
19. The influence of metakaolin on the properties of natural hydraulic lime-based grouts for historic masonry repair10.1016/j.conbuildmat.2018.04.007 ↗
20. Optimization of cement-based grouts using chemical additives10.1016/j.jrmge.2016.11.013 ↗
21. Performance characteristics of cement grouts made with various combinations of high-range water reducer and cellulose-based viscosity modifier10.1016/S0008-8846(03)00214-X ↗
22. Evaluation of natural zeolite as a viscosity-modifying agent for cement-based grouts10.1016/j.cemconres.2008.03.007 ↗
23. Mitigating shrinkage cracking in posttensioning grout using shrinkage-reducing admixture10.1016/j.cemconcomp.2017.05.005 ↗
24. Effect of different superplasticisers on the physical and mechanical properties of cement grouts10.1016/j.conbuildmat.2013.09.050 ↗
25. Rheological and mechanical properties of microfine-cement-based grouts mixed with microfine fly ash, colloidal nanosilica and superplasticizer10.1016/j.conbuildmat.2019.03.314 ↗
26. The effect of organic retarders on grout thickening and setting during deep borehole disposal of high-level radioactive waste10.1016/j.pnucene.2016.02.021 ↗
27. Effect of mix proportions on rheology and permeability of cement grouts containing viscosity modifying admixture10.1016/j.conbuildmat.2019.04.022 ↗
28. GB/T 50448-2015, Technical code for application of cementitious grout (in Chinese).
29. JTG/T F50-2011, Technical Specification for construction of Highway Bridge and Culvert (in Chinese).
30. JG/T 408-2013, Cementitious grout for coupler of rebar splicing (in Chinese).
31. Effect of shrinkage reducing agent on pullout resistance of high-strength steel fibers embedded in ultra-high-performance concrete10.1016/j.cemconcomp.2013.12.012 ↗
32. The influence of expansive agent on the performance of fibre reinforced cement-based composites10.1016/j.conbuildmat.2015.05.002 ↗
33. Effects of combined expansive agents and supplementary cementitious materials on the mechanical properties, shrinkage and chloride penetration of self-compacting concrete10.1016/j.conbuildmat.2019.03.143 ↗
34. Jia · 2018
35. GB/T 2419-2005, Test method for fluidity of cement mortar (in Chinese).
36. GB/T 17671-1999, Method of testing cements-Determination of strength (in Chinese).
37. GB/T 29417-2012, Standard test methods for drying shrinkage stress and cracking possibility of cement mortar and concrete (in Chinese).
38. Azobisformamide (blowing agent Ac) review
39. Hydration of ordinary Portland cement and calcium sulfoaluminate cement blends10.1016/j.cemconcomp.2014.11.005 ↗
40. Hydration of calcium sulfoaluminate cements—experimental findings and thermodynamic modelling10.1016/j.cemconres.2009.08.014 ↗