journal article·2020-06

Degradation mechanisms of alkali-activated binders in sulfuric acid: The role of calcium and aluminum availability

Hailong Ye, Le Huang

Publisher page

Abstract

Abstract Although alkali-activated binders (AABs) show a stronger resistance against sulfuric acid (H2SO4) attack than ordinary Portland cement (OPC), it remains unclear how the resistance capacity is affected by the compositional variability of gel products, i.e., sodium calcium aluminosilicate hydrate (N-C-A-S-H). In this work, the compositional and molecular alteration of synthetic N-C-A-S-H exposed to 1.0%, 2.5%, and 5.0% H2SO4 solutions are studied. The results show that the formation of ettringite is less favored than gypsum when the calcium availability is limited, despite sufficient aluminum sources. The calcium and aluminum dissolved from N-C-A-S-H can contribute to the ettringite formation even though the AFm phases are present, particularly for those with relatively high Ca/Si and Al/Si ratios. The aluminum content in AABs controls the AFm formation and Al/Si ratio of N-C-A-S-H, thus affecting the condition for ettringite and gypsum precipitation. The presence of calcium in the atomic structure of N-C-A-S-H makes it more susceptible to the acid-induced degradation and polymerization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Advances in understanding alkali-activated materials10.1016/j.cemconres.2015.04.013 ↗
2. Alkali-Activated Slag Cement Concrete
3. Advances in alternative cementitious binders10.1016/j.cemconres.2010.11.012 ↗
4. Durability of alkali-activated binders: a clear advantage over Portland cement or an unproven issue?10.1016/j.conbuildmat.2011.12.017 ↗
5. Shrinkage and strength development of alkali-activated fly ash-slag binary cements10.1016/j.conbuildmat.2017.06.040 ↗
6. Material properties of structurally viable alkali-activated fly ash concrete10.1061/(ASCE)MT.1943-5533.0000680 ↗
7. Comparative life cycle assessment of conventional, glass powder, and alkali-activated slag concrete and mortar10.1061/(ASCE)IS.1943-555X.0000211 ↗
8. Sulfuric acid resistance of one-part alkali-activated mortars10.1016/j.cemconres.2018.04.009 ↗
9. Nitric acid attack on hardened paste of geopolymeric cements, Part 1
10. Resistance of geopolymer materials to acid attack10.1016/j.cemconres.2004.06.005 ↗
11. A review on the durability of alkali-activated fly ash/slag systems: advances, issues, and perspectives10.1021/acs.iecr.6b00559 ↗
12. Alkali-activated binders: A review: Part 1. Historical background, terminology, reaction mechanisms and hydration products10.1016/j.conbuildmat.2007.10.015 ↗
13. Mechanism of sulfate attack on alkali-activated slag: The role of activator composition10.1016/j.cemconres.2019.105868 ↗
14. Influence of activator composition on the chloride binding capacity of alkali-activated slag10.1016/j.cemconcomp.2019.103368 ↗
15. Advances in concrete materials for sewer systems affected by microbial induced concrete corrosion: A review10.1016/j.watres.2018.01.043 ↗
16. Biogenic deterioration of concrete and its mitigation technologies10.1016/j.conbuildmat.2017.05.144 ↗
17. Provis · 2009
18. Effect of slag content and activator dosage on the resistance of fly ash geopolymer binders to sulfuric acid attack10.1016/j.cemconres.2018.06.011 ↗
19. A review: The comparison between alkali-activated slag (Si+ Ca) and metakaolin (Si+ Al) cements10.1016/j.cemconres.2010.03.020 ↗
20. Alkali-activated materials from different aluminosilicate sources: Effect of aluminum and calcium availability10.1016/j.jnoncrysol.2018.01.014 ↗
21. Fly ash-slag interaction during alkaline activation: Influence of activators on phase assemblage and microstructure formation10.1016/j.conbuildmat.2016.06.099 ↗
22. Phase diagrams for alkali-activated slag binders10.1016/j.cemconres.2017.02.006 ↗
23. Quantitative Analysis of Phase Assemblage and Chemical Shrinkage of Alkali-Activated Slag10.3151/jact.14.245 ↗
24. Influence of dolomite on the properties and microstructure of alkali-activated slag with and without pulverized fly ash10.1016/j.cemconcomp.2019.05.011 ↗
25. Carbonation-induced volume change in alkali-activated slag10.1016/j.conbuildmat.2017.03.238 ↗
26. Hydration products of alkali activated slag cement10.1016/0008-8846(95)00045-E ↗
27. Shrinkage mechanisms of alkali-activated slag10.1016/j.cemconres.2016.07.001 ↗
28. Synthesis and characterisation of materials based on inorganic polymers of alumina and silica: sodium polysialate polymers10.1016/S1466-6049(00)00041-6 ↗
29. The evolution of strength and crystalline phases for alkali-activated ground blast furnace slag and fly ash-based geopolymers10.1016/j.cemconres.2009.10.010 ↗
30. The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation10.1016/j.cemconres.2004.10.042 ↗
31. Compatibility studies between NASH and CASH gels. Study in the ternary diagram Na2O–CaO–Al2O3–SiO2–H2O10.1016/j.cemconres.2011.05.006 ↗
32. Sulfuric acid resistance of blended ash geopolymer concrete10.1016/j.conbuildmat.2013.01.018 ↗
33. Sulfuric acid resistance of fly ash based geopolymer concrete10.1016/j.conbuildmat.2017.04.077 ↗
34. Durability of geopolymer materials in sodium and magnesium sulfate solutions10.1016/j.cemconres.2004.09.002 ↗
35. Fly ash slag geopolymer concrete: Resistance to sodium and magnesium sulfate attack10.1061/(ASCE)MT.1943-5533.0001618 ↗
36. Impact of sodium sulfate solution on mechanical properties and structure of fly ash based geopolymers10.1617/s11527-014-0325-4 ↗
37. Physical and microstructural aspects of sulfate attack on ordinary and limestone blended Portland cements10.1016/j.cemconres.2009.08.005 ↗
38. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
39. Influence of calcium to silica ratio on aluminium uptake in calcium silicate hydrate10.1016/j.cemconres.2016.01.014 ↗
40. Effect of alkalis on fresh C-S–H gels. FTIR analysis10.1016/j.cemconres.2009.01.003 ↗
41. Cemdata18: A chemical thermodynamic database for hydrated Portland cements and alkali-activated materials
42. A thermodynamic model for C-(N-) ASH gel: CNASH_ss. Derivation and validation10.1016/j.cemconres.2014.07.005 ↗
43. The calcium silicate hydrates10.1016/j.cemconres.2007.11.005 ↗
44. Understanding the relationship between geopolymer composition, microstructure and mechanical properties10.1016/j.colsurfa.2005.06.060 ↗
45. The role of aluminium in CASH during sulfate attack on concrete10.1016/j.cemconres.2018.11.012 ↗
46. Structure and reactivity of synthetic CaO-Al2O3-SiO2 glasses10.1016/j.cemconres.2019.03.004 ↗
47. Scrivener · 2018
48. Nanoscale Chemical Degradation Mechanisms of Sulfate Attack in Alkali-activated Slag10.1021/acs.jpcc.7b11270 ↗
49. Mitigation of Alkali-Silica Reaction by Hydrated Alumina10.3141/2629-04 ↗
50. A quantitative comparison between chemical dosing and electrocoagulation10.1016/S0927-7757(02)00285-6 ↗