journal article·2020-07

Evaluation of the rheological behavior, hydration process, and mechanical strength of Portland cement pastes produced with carbon nanotubes synthesized directly on clinker

Tarcizo C. de Souza, Guilherme Pinto, Victor S. Cruz, Matheus Moura, Luiz O. Ladeira, José M. Calixto

Publisher page

Abstract

Abstract Multi-walled carbon nanotubes (MWCNTs) have been incorporated in cementitious composites and important results in terms of rheological and mechanical performance have been obtained. Despite the current MWCNT dispersion procedures found in the literature, MWCNT synthesized directly on clinker is an alternative route to employ this nanomaterial in cementitious composites. It is also much more compatible with the procedures used by the construction industry. Based on this scenario, this study presents results in terms of rheological behavior, hydration process and mechanical strength of cement pastes (with a water/cement ratio of 0.4), produced with MWCNTs synthesized directly on clinker. The percentage of MWCNTs was equal to 0.15 and 0.30% with respect to cement content (bwoc). A reference paste without MWCNTs was also produced for comparison. In terms of the rheological behavior, the cement pastes with MWCNTs showed adequate performance for the application. It was also verified that MWCNTs promoted an increase in the cement hydration rate, reducing the initial setting time and changing the hydration period. This was most evident when the MWCNT rate was increased from 0.15 to 0.30% bwoc. With respect to compressive and tensile strength, the pastes with MWCNTs showed gains of 28% and 43% respectively at the age of 28 days for the 0.15% carbon nanotube content.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Smart Materials for Construction · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Nano-inclusions applied in cement-matrix composites: a review10.3390/ma9121015 ↗
2. Applications of using nanomaterial in concrete: a review10.1016/j.conbuildmat.2016.12.005 ↗
3. Effect of carbon nanotubes (CNTs) on the properties of traditional cementitious materials10.1016/j.conbuildmat.2017.07.089 ↗
4. A review on the chemical, mechanical and microstructural characterization of carbon nanotubes-cement based composites10.1016/j.conbuildmat.2017.07.232 ↗
5. Review of nanocarbon-engineered multifunctional cementitious composites”10.1016/j.compositesa.2014.12.002 ↗
6. The theoretical maximum achievable dispersion of nano inclusions in cement paste10.1016/j.cemconres.2012.03.001 ↗
7. Microstructure and mechanical properties of carbon nanotube reinforced cementitious composites developed using a novel dispersion technique10.1016/j.cemconres.2015.03.006 ↗
8. A review on nanomaterial dispersion, microstructure, and mechanical properties of carbon nanotube and nanofiber reinforced cementitious composites
9. L.O. Ladeira, E.E. Silva, S. Oliveira, S. Lacerda, R.G. Ferlauto, A.S. Ávila E. Lourençon, Large-scale production of carbon nanotubes in Portland cement, US Patent, 9085487 B2, 2015.
10. Using converter dust to produce low-cost cementitious composites by in situ carbon nanotube and nanofiber synthesis10.3390/ma4030575 ↗
11. A novel approach to composite preparation by direct synthesis of carbon nanomaterial on matrix or filler particles”10.1016/j.actamat.2012.12.007 ↗
12. In situ growth of carbon nanotubes/carbon nanofibers on cement/mineral admixture particles: a review10.1016/j.conbuildmat.2013.09.011 ↗
13. Mechanical and rheological behavior of oil-well cement slurries produced with clinker containing carbon nanotubes10.1016/j.petrol.2014.07.020 ↗
14. Analysis of cementitious composites prepared with carbon nanotubes and nanofibers synthesized directly on clinker and silica fume10.1061/(ASCE)MT.1943-5533.0001836 ↗
15. Current understanding of the growth of carbon nanotubes in catalytic chemical vapor deposition10.1016/j.carbon.2013.02.046 ↗
16. Rheological properties of cementitious composites with nano/fiber fillers10.1016/j.conbuildmat.2017.10.072 ↗
17. Influence of MWCNT/surfactant dispersions on the rheology of Portland cement pastes10.1016/j.cemconres.2018.02.020 ↗
18. Rheological properties of cement pastes with multiwalled carbon nanotubes10.1155/2018/8963542 ↗
19. The influences of admixtures on the dispersion, workability, and strength of carbon nanotube-OPC paste mixtures10.1016/j.cemconcomp.2011.09.013 ↗
20. Development of carbon nanotube modified cement paste with microencapsulated phase-change material for structural–functional integrated application10.3390/ijms16048027 ↗
21. Makar, J., Margerson, J., Luh, J., Carbon nanotube/cement composites – early results and potential applications, in: Proceedings of the 3rd International Conference on Construction Materials: Performance, Innovations and Structural Implications, Vancouver, B.C., August 22–24, 2005.
22. Contribution of CNTs/CNFs morphology to the reduction of autogenous shrinkage of Portland cement paste10.1007/s11709-016-0331-4 ↗
23. Mechanical properties and reinforcing mechanisms of cementitious composites with different types of multiwalled carbon nanotubes10.1016/j.compositesa.2017.10.001 ↗
24. Behavior of multi-walled carbon nanotubes on the porosity and microstructure of cement-based materials10.1016/j.apsusc.2010.09.030 ↗
25. Viscosity prediction of cement-filler suspensions using interference model: a route for binder efficiency enhancement10.1016/j.cemconres.2016.02.012 ↗
26. Studies on rheological properties of superplasticised PPC paste
27. Rheological properties of cement pastes: a discussion of structure formation and mechanical property development10.1016/j.cemconres.2008.06.008 ↗
28. Measurement of the rheological properties of high-performance concrete: state of the art report10.6028/jres.104.028 ↗
29. Hackley · 2001 · vol. 960
30. Rheological properties of cement paste: Thixotropic behavior and structural breakdown10.1016/j.cemconres.2008.10.001 ↗
31. American Society for Testing and Materials · 2015
32. A comparative study between the early stages hydration of a high strength and sulfate resistant portland cement and the type II F Portland cement through non-conventional differential thermal analysis and thermogravimetry10.1590/1516-1439.373714 ↗
33. Early stages hydration of high initial strength Portland cement: Part II. NCDTA and Vicat analysis10.1007/s10973-012-2757-9 ↗
34. Influence of cement fineness and water-to-cement ratio on mortar early-age heat of hydration and set times10.1016/j.conbuildmat.2013.10.011 ↗
35. Hydration development of mineral additives blended cement using thermogravimetric analysis (TGA): methodology of calculating the degree of hydration10.1016/j.conbuildmat.2017.04.132 ↗
36. The degree of hydration assessment of blended cement pastes by differential thermal and thermogravimetric analysis. Morphological evolution of the solid phases10.1016/j.tca.2014.08.008 ↗
37. Effect of mineral admixtures on the structural build-up of cement paste10.1016/j.conbuildmat.2017.11.050 ↗
38. Mechanical behavior and transport properties of cementitious composites reinforced multi-walled carbon nanotubes
39. FTIR study on early-age hydration of carbon nanotubes-modified cement-based materials
40. Overview about the use of Fourier transform infrared spectroscopy to study cementitious materials10.2495/MC130221 ↗
41. A Fourier transform infrared spectroscopic investigation of the early hydration of Portland cement and the influence of sodium lignosulfonate10.1016/S0008-8846(99)00243-4 ↗
42. Structure of calcium silicate hydrate (C-S-H): near-, mid-, and far-infrared spectroscopy10.1111/j.1151-2916.1999.tb01826.x ↗
43. An X-ray diffraction (XRD) and Fourier transform infrared spectroscopic (FT-IR) characterization of the speciation of arsenic (V) in Portland cement type-V10.1016/S0048-9697(98)00318-0 ↗