journal article·2020-08

Post-fire mechanical behavior and recovery of structural reinforced concrete beams

Abdullah Huzeyfe Akca, Nilüfer Özyurt

Publisher page

Abstract

Abstract The results of fire tests obtained from small-sized specimens may fail to represent the real post fire behavior of structural elements. Therefore, in this study structural concrete beams were exposed to ISO fire curve and then subjected to different curing conditions to better understand the changes in concrete during the post-fire stage. Beams were tested under four-point bending to evaluate their residual mechanical performance, and scanning electron microscopy (SEM) was performed in order to monitor the changes in the morphology of concrete due to fire exposure. The results showed that high temperature exposure caused deterioration in the morphology and reduction in residual mechanical properties of concrete, while post-fire re-curing caused an improvement in residual mechanical properties and recovery in the microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fire effects on concrete materials · Engineering and Material Science Research · Fire dynamics and safety research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. High performance concrete under elevated temperatures10.1016/j.conbuildmat.2013.03.005 ↗
2. Effect of elevated temperatures on the residual mechanical properties of high-performance mortar10.1016/S0008-8846(02)00709-3 ↗
3. Effect of temperature on thermal properties of high-strength concrete10.1061/(ASCE)0899-1561(2003)15:2(101) ↗
4. Effects of re-curing on microstructure of concrete after high temperature exposure10.1016/j.conbuildmat.2018.02.122 ↗
5. Bazant · 1996
6. Strength and durability recovery of fire-damaged concrete after post-fire-curing10.1016/S0008-8846(01)00582-8 ↗
7. Material and environmental factors influencing the compressive strength of unsealed cement Paste and Concrete at High Temperatures10.1680/macr.1993.45.162.51 ↗
8. Regain of strength and firing of concrete10.1680/macr.1970.22.72.149 ↗
9. Effects of re-curing on residual mechanical properties of concrete after high temperature exposure10.1016/j.conbuildmat.2017.11.005 ↗
10. Microstructures of fire-damaged concrete
11. Effects of slag and cooling method on the progressive deterioration of concrete after exposure to elevated temperatures as in a fire event10.1617/s11527-010-9660-2 ↗
12. Dehydration and rehydration processes of cement paste exposed to high temperature environments10.1023/B:JMSC.0000025827.65956.18 ↗
13. Effect of fire on concrete and concrete structures10.1002/pse.51 ↗
14. Mechanical behavior and recovery of FRC after high temperature exposure10.4028/www.scientific.net/KEM.711.457 ↗
15. Analysis of the optimum usage of slag for the compressive strength of concrete10.3390/ma8031213 ↗
16. Comparison of the strength and durability performance of normal- and high-strength pozzolanic concretes at elevated temperatures10.1016/S0008-8846(01)00580-4 ↗
17. Explosive spalling and residual mechanical properties of fiber-toughened high-performance concrete subjected to high temperatures10.1016/j.cemconres.2005.12.014 ↗
18. Performance of thermally damaged fibre reinforced concretes10.1016/j.conbuildmat.2008.08.009 ↗
19. Creep behavior of high strength concrete with polypropylene fibers at elevated temperatures
20. Compressive behavior of fiber reinforced high-performance concrete subjected to elevated temperatures10.1016/j.cemconres.2004.02.011 ↗
21. Concrete cover effect on reinforced concrete bars exposed to high temperatures10.1016/j.conbuildmat.2006.11.019 ↗
22. The European Union Per Regulation · 1992
23. Characterization of the behavior of high performance mortar subjected to high temperatures10.1016/j.conbuildmat.2011.07.063 ↗