journal article·2020-09

Flexural fatigue behavior of fly ash geopolymer stabilized-geogrid reinforced RAP bases

Maheshbabu Jallu, Arul Arulrajah, Sireesh Saride, Robert Evans

Publisher page

Abstract

Abstract Flexural fatigue behavior under heavy traffic loading has been identified as a critical distress problem in a flexible pavement that consists of cemented base/subbase layers. The stresses from repetitive traffic loads eventually reduce the tensile stiffness of the cemented base layer leading to fatigue failure. Therefore, this present study focused on evaluating the flexural fatigue behavior of a high percent (60%) Reclaimed Asphalt Pavement (RAP) replaced by Virgin Aggregate (VA) stabilized with alkali-activated fly ash (FA) under stress-controlled mode. Based on the Unconfined Compressive Strength (UCS), and Repeated Load Triaxial (RLT) test results, a potential design mix was proposed and implemented throughout the testing program. Beam specimens reinforced with biaxial and triaxial geogrids were also experimentally examined for comparison, and the fatigue life of the corresponding specimens was shown to improve by 1.66 and 2.54 times, respectively than the control mix. The fracture energy (GD) and the tensile stiffness index (IRT) of the tested specimens were also evaluated from the flexural strength test results. The test findings indicated that the inclusion of geogrid reinforcement adequately improved the flexural strength and fatigue life of the alkali-activated FA treated RAP:VA beam specimens.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Geotechnical Engineering and Soil Stabilization · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Construction and demolition waste generation and properties of recycled aggregate concrete: A global perspective10.1016/j.jclepro.2018.03.085 ↗
2. Resilient moduli response of moderately cement-treated reclaimed asphalt pavement aggregates10.1061/(ASCE)MT.1943-5533.0000268 ↗
3. Geotechnical performance of recycled glass-waste rock blends in footpath bases10.1061/(ASCE)MT.1943-5533.0000617 ↗
4. Utilization of reclaimed asphalt pavements in Indian low-volume roads10.1061/(ASCE)MT.1943-5533.0001374 ↗
5. Characterization of cement-fiber-treated reclaimed asphalt pavement aggregates: preliminary investigation10.1061/(ASCE)MT.1943-5533.0000267 ↗
6. Cement stabilization of reclaimed asphalt pavement aggregate for road bases and subbases10.1061/(ASCE)0899-1561(2002)14:3(239) ↗
7. Evaluation and mix design of cement-treated base materials with high content of reclaimed asphalt pavement10.3141/2212-12 ↗
8. Texas Department of Transportation (TxDOT), Soil cement testing, Tex-120-E, TxDOT, Austin, TX, 1999.
9. A life-cycle assessment of Portland cement manufacturing: comparing the traditional process with alternative technologies10.1016/j.jclepro.2008.04.007 ↗
10. Composition and microstructure of alkali activated fly ash binder: Effect of the activator10.1016/j.cemconres.2005.03.003 ↗
11. Durability and long term performance of geopolymer stabilized reclaimed asphalt pavement base courses10.1016/j.conbuildmat.2016.05.162 ↗
12. Indian Roads Congress (IRC), Guidelines for the design of flexible pavements. Indian code of practice 2018 New Delhi, India IRC:37–2018.
13. An XRD study of the effect of the SiO2/Na2O ratio on the alkali activation of fly ash10.1016/j.cemconres.2007.01.013 ↗
14. Strength development of Recycled Asphalt Pavement-Fly ash geopolymer as a road construction material10.1016/j.conbuildmat.2016.04.136 ↗
15. Modulus of rupture evaluation of cement stabilized recycled glass/recycled concrete aggregate blends10.1016/j.conbuildmat.2015.03.048 ↗
16. Flexural fatigue strength of demolition aggregates stabilized with alkali-activated calcium carbide residue10.1016/j.conbuildmat.2018.12.031 ↗
17. Effect of geogrid-reinforcement in granular bases under repeated loading10.1016/j.geotexmem.2017.04.008 ↗
18. Performance of geosynthetic-reinforced flexible pavements in full-scale field trials10.1016/j.geotexmem.2018.12.012 ↗
19. ASTM C136, Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates, ASTM C136, West 2019 Conshohocken, PA.
20. ASTM D2487, Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System), ASTM D2487, West 2017 Conshohocken, PA.
21. ASTM C618, Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete, ASTM C618, West 2019 Conshohocken, PA.
22. The geopolymerisation of alumino-silicate minerals10.1016/S0301-7516(99)00074-5 ↗
23. R. Yeo, The development and evaluation of protocols for the laboratory characterisation of cemented materials (No. AP-T101/08), 2008.
24. Geogrid in flexible pavements: validated mechanism10.3141/2045-12 ↗
25. ASTM D1633, Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders, ASTM D1633, West 2017 Conshohocken, PA.
26. AASHTO, Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials AASHTO T 307-99, AASHTO, American Association of State and Highway Transportation Officials, 2003.
27. AASHTO guidelines for design of pavement structures, Washington, DC, 1993.
28. Austroads, Cost effective structural treatments for rural highways: Cemented materials, AP-T168-10, Sydney, Australia, 2010.
29. ASTM D1557, Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort, ASTM D1557, West 2012 Conshohocken, PA.
30. Austroads, Guide to Pavement Technology. Part 4D: Stabilised Materials, AGPT04D/06, Sydney, Australia, 2006.
31. TxDOT, Standard Specifications for Construction and Maintenance of Highways, Streets, and Bridges (Item 276), TxDOT, Austin, TX, 2014.
32. Structural reorganisation of class F fly ash in alkaline silicate solutions10.1016/S0927-7757(02)00237-6 ↗
33. Flexural beam fatigue strength evaluation of crushed brick as a supplementary material in cement stabilized recycled concrete aggregates10.1016/j.conbuildmat.2014.07.007 ↗
34. Evaluation of effect of basal geotextile reinforcement under embankment loading on soft marine deposits10.1016/j.geotexmem.2015.05.005 ↗
35. ASTM C127, Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate, ASTM C127, West 2015 Conshohocken, PA.
36. ASTM D422, Standard Test Method for Particle-Size Analysis of Soils, ASTM D422, West 2007 Conshohocken, PA.
37. ASTM D4972, Standard Test Methods for pH of Soils, ASTM D4972, West 2019 Conshohocken, PA.
38. ASTM D6637, Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method, ASTM D6637, West 2015 Conshohocken, PA.
39. ASTM D7737, Standard Test Method for Individual Geogrid Junction Strength, ASTM D7737, West 2011 Conshohocken, PA.
40. TR41, E. O. T. A. (European Organisation for Technical Approvals), Non-reinforcing hexagonal geogrid for the stabilization of unbound granular layers by way of interlock with the aggregate, European Organization of Technical Approvals, 2012.