journal article·2020-11

Pure torsional behavior of RC beams in relation to the amount of torsional reinforcement and cross-sectional properties

Min-Jun Kim, Hyeong-Gook Kim, Yong-Jun Lee, Dong-Hwan Kim, Jung-Yoon Lee, Kil-Hee Kim

Publisher page

Abstract

Abstract According to the current ACI318-19 building code, torsional strength is calculated by reflecting the effective area of concrete and the properties of torsional reinforcement, regardless of the cross-sectional properties of the reinforced concrete members. Past research has revealed that the torsional failure mode of RC members subjected to torsional strength is influenced by the contribution of the concrete and the amount of torsional reinforcement. In this study, 11 experiments were conducted to examine the pure torsional behavior of RC members in relation to their cross-sectional properties, and the amount of torsional reinforcement. The experimental variables were (1) the properties of the solid and hollow cross-sections, (2) the amount of arranged torsional reinforcement compared to that of the ACI 318-19 building code, (3) the yield strength of the torsional reinforcement, and (4) the spacing of the torsional reinforcement. The results showed that solid cross-sections and hollow cross-sections had similar levels of torsional strength. In addition, the specimens with a smaller amount of arranged torsional reinforcement were engaged in ductile behavior when compared with the ACI 318-19 building code, regardless of their cross-sectional properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. American Concrete Institute, ACI Committee 318 Building Code Requirements for Structural Concrete (ACI 318M-19) and Commentary, American Concrete Institute, Farmington Hills, MI, 2019.
2. Design for Torsion
3. Comite European De Normalisation (CEN), Eurocode 2: Design of Concrete Structures, Part 1-1 General Rules and Rules for Buildings (BS EN 1992-1-1), Lausanne, Switzerland, 2004.
4. CSA Committee A23.3-14, Design of Concrete Structures for Buildings (CAV3-A23.3-14), Canadian Standards Association, Toronto, ON, Canada, 2004.
5. Japan Society of Civil Engineering, Standard Specifications for Concrete Structures, Japan Society of Civil Engineering, Japan, 2007.
6. Torsion design charts for reinforced concrete rectangular members10.1061/(ASCE)0733-9445(2000)126:2(210) ↗
7. Torsion of High-Strength Reinforced Concrete Beams and Minimum Reinforcement Requirement
8. Torsional Strength and Failure Modes of Reinforced Concrete Beams Subjected to Pure Torsion10.4334/JKCI.2008.20.4.503 ↗
9. Torsional strength of RC beams considering tension stiffening effect10.1061/(ASCE)ST.1943-541X.0000237 ↗
10. Maximum Torsional Reinforcement of Reinforced Concrete Beams Subjected to Pure Torsion10.14359/51701108 ↗
11. Torsional Behavior of Reinforced Concrete Beams with High-Strength Steel Bars
12. Torsion in High-Strength Concrete Hollow Beams: Strength and Ductility Analysis
13. Design Formulas for Cracking Torque and Twist in Hollow Reinforced Concrete Members
14. New Torsion Experiment on Large-Sized Hollow Reinforced Concrete Beams10.14359/51687166 ↗
15. Ductility of RC beams Under Torsion10.1016/j.engstruct.2018.05.021 ↗
16. Torsion of Structural Concrete-Behavior of Reinforced Concrete Rectangular Members. Torsion of structural concrete, SP-18
17. P. Lampert, and B. Thürlimann, Torsionsversuche. an Stahlbeton- balken (Torsion Tests of Reinforced Concrete Beams), Bericht Nr. 6506-2, Institute fur Baustatik, ETH, Zurich, Switzerland 1968.10.1007/978-3-0348-6908-9 ↗
18. P. Lampert, P. Lüchinger, and B. Thürlimann, Torsionsversuche an Stahl-und Spannbetonbalken (Torsion Tests on Reinforced and Prestressed Concrete Beams), Bericht Nr. 6506-4, Institute für Baustatik, ETH, Zurich, Switzerland 1971.10.1007/978-3-0348-6999-7 ↗
19. F. Leonhardt, and G. Schelling, Torsionsversuche an Stahlbeto- nbalken, Bulletin No. 239, Deutscher Ausschuss für Stahlbeton, Berlin 1974.
20. Y. G. Lai, Investigation on Thickness of Shear Flow Zone for RC Beams Subjected to Pure Torsion, master’s thesis, National Cheng Kung University, Tainan, Taiwan, 1998. (in Chinese)
21. Unified rational formula for pre-cracking torsional stiffness of solid and hollow reinforced concrete members10.1016/j.engstruct.2015.04.038 ↗
22. Unified softened membrane model for torsion in hollow and solid reinforced concrete members: modelling pre-cracking and post-cracking behavior10.1061/(ASCE)ST.1943-541X.0001212 ↗
23. Behavior of reinforced concrete beams with minimum torsional reinforcement10.1016/j.engstruct.2006.11.004 ↗
24. Plastic analysis and twist capacity of high-strength concrete hollow beams under pure torsion10.1016/j.engstruct.2012.10.030 ↗
25. Evaluation of bond capacity of reinforced concrete columns with U-shaped transverse reinforcement10.1080/19648189.2015.1016630 ↗
26. A prediction model for bond deterioration in RC members. I: bond stress-slip behavior for splitting failure10.1061/(ASCE)ST.1943-541X.0001966 ↗
27. A prediction model for bond deterioration in RC members. Ⅱ: bond stress-slip behavior for splitting failure10.1061/(ASCE)ST.1943-541X.0001971 ↗