Determination of the relationship between the Los Angeles abrasion values of aggregates and concrete strength using the Response Surface Methodology
Source abstract
Abstract
Abstract The present study aims to determine the relationship between aggregate abrasion strength and concrete strength considering water-to-cement and aggregate-to-cement ratios. For this purpose, concrete mixtures with different water-to-cement ratios (0.38, 0.40, 0.42, 0.45, 0.50, 0.55 and 0.60) were prepared with different aggregate types (basalt, marble, limestone, and natural aggregates). Hardened concrete properties of the prepared specimens were determined. Also, the abrasion tests were performed for each aggregate used in the experiments to determine the Los Angeles abrasion values of the aggregates. Using the experimental data, the compressive strength and splitting tensile strength values of the concrete specimens with dimensionless parameters such as water-to-cement ratio, aggregate-to-cement ratio, and Los Angeles abrasion loss value were analyzed using the Response Surface Methodology. Thus, two new models were developed with a multi-purpose optimization method. The compressive strength and splitting tensile strength can be calculated with high accuracy for different mixture designs with these models using the aggregate abrasion loss value, water-to-cement ratio, and aggregate-to-cement ratio. In conclusion, savings in labor and time, and economic profit are expected by designing a concrete mixture in this way.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. TS 706 EN 12620+A1, Aggregates for concrete, Turkish Standards Institutions, Ankara, 2009.
2. Durability of concrete made with granite and marble as recycle aggregates10.1016/j.jmatprotec.2007.12.120 ↗
3. A preliminary concrete mix design for SCC with marble powders10.1016/j.conbuildmat.2008.08.012 ↗
4. Influence of recycled aggregate quality and proportioning criteria on recycled concrete properties10.1016/j.wasman.2009.07.010 ↗
5. Durability of recycled aggregate concrete10.1016/j.conbuildmat.2012.11.106 ↗
6. Effect of the lime content in marble powder for producing high strength concrete
7. K.E. Alyamac, E. Tugrul, A durable, eco-friendly and aesthetic concrete work: marble concrete. In 11th Int. Cong. Adv. Civ. Eng. (ACE 2014) 50 (2014) 21-25.
8. Durability performance of concrete incorporating coarse aggregates from marble industry waste10.1016/j.jclepro.2013.09.037 ↗
9. Mechanical performance of concrete with incorporation of coarse waste from the marble industry10.1590/1516-1439.210413 ↗
10. Development of eco-efficient self-compacting concrete with waste marble powder using the response surface method10.1016/j.jclepro.2016.12.156 ↗
11. Optimization of normal and high strength recycled aggregate concrete mixtures by using packing model10.1016/j.cemconcomp.2017.08.016 ↗
12. Experimental investigation of properties of concrete containing recycled construction wastes10.1007/s40999-018-0301-4 ↗
13. Recycling of marble waste: a review based on strength of concrete containing marble waste10.1016/j.jenvman.2018.10.034 ↗
14. Effect of aggregate type on the mechanical properties of concretes with different strengths10.1016/S0008-8846(97)00006-9 ↗
15. Influence of recycled aggregates on mechanical properties of HS/HPC10.1016/S0958-9465(01)00012-9 ↗
16. The use of basalt aggregates in concrete mixes in Jordan
17. The influence of aggregate type on the strength and abrasion resistance of high strength concrete10.1016/j.cemconcomp.2007.05.011 ↗
18. Aggregate-cement paste interface. II: Influence of aggregate physical properties10.1016/S0008-8846(98)00126-4 ↗
19. Use of basalt in asphalt concrete mixes10.1016/j.conbuildmat.2007.10.026 ↗
20. Effect of coarse aggregate type on mechanical properties of high-performance concrete10.1016/S0008-8846(01)00588-9 ↗
21. Effect of coarse aggregate quality on the mechanical properties of high strength concrete10.1016/S0950-0618(02)00097-1 ↗
22. Effect of limestone aggregate type and water cement ratio on concrete strength10.1016/j.matlet.2003.06.004 ↗
23. Effect of absorption of limestone aggregates on strength and slump loss of concrete10.1016/j.cemconcomp.2009.04.010 ↗
24. The effects of limestone aggregate on concrete properties10.1016/j.conbuildmat.2010.05.008 ↗
25. Evaluation of concrete incorporating bottom ash as a natural aggregates replacement10.1016/j.wasman.2006.07.020 ↗
26. Assessing concrete strength by means of small diameter cores10.1016/j.conbuildmat.2006.11.020 ↗
27. Roller compacted concrete with contaminated recycled aggregates10.1016/j.conbuildmat.2009.06.031 ↗
28. Effect of mix component on the mechanical properties of coral concrete under axial compression10.1016/j.conbuildmat.2019.07.015 ↗
29. Shear strength of recycled aggregate concrete to natural aggregate concrete interfaces10.1016/j.conbuildmat.2016.02.002 ↗
30. Effects of coral, recycled and natural coarse aggregates on the mechanical properties of concrete10.1016/j.conbuildmat.2018.10.111 ↗
31. Strength properties of hardened concrete produced with natural aggregates for different water/cement ratios10.31590/ejosat.486093 ↗
32. E. Tugrul Tunc, K.E. Alyamac, A preliminary estimation method of Los Angeles abrasion value of concrete aggregates, Constr. Build. Mater. 222 (2019) 437-446.10.1016/j.conbuildmat.2019.06.176 ↗
33. ASTM C131, Standard Test Method for Resistance to Degradation of Small- SizeCoarse Aggregate by Abrasion and Impact in the Los Angeles Machine. ASTMC131, ed., ASTM International, West Conshohocken, PA, 2006.
34. European Standard EN 1097-1—tests for mechanical and physical properties of aggregates. Part 1: Determination of the resistance to wear (micro-Deval) 2003.
35. European Standard EN 1097-9—tests for mechanical and physical properties of aggregates. Part 9—Determination of the resistance to wear by abrasion from studded tires, Nordic test, 2005.
36. E. Tugrul Tunc, Determination of Los Angeles abrasion loss of the basalt aggregate type of Elazığ province, In International Conference on Innovative Engineering Applications (CIEA-2018), (2018) 595-602.
37. Effect of rock properties on the Los Angeles abrasion and impact test characteristics of the aggregates10.1016/j.matchar.2009.10.014 ↗
38. Recyclability of waste marble in concrete production10.1016/j.jclepro.2016.05.052 ↗
39. Abrasion resistance of concrete10.1061/(ASCE)0899-1561(1991)3:1(19) ↗
40. Predicting the Los Angeles abrasion loss of rock aggregates from the uniaxial compressive strength10.1016/j.matlet.2007.06.003 ↗
41. Influence of recycled concrete aggregates on strength properties of concrete10.1016/j.conbuildmat.2008.06.007 ↗
42. Cerchar abrasivity index (CAI) and its relation to strength and abrasion test methods for marble stones10.1016/j.conbuildmat.2011.11.023 ↗
43. Influence of recycled aggregate on fly ash geopolymer concrete properties10.1016/j.jclepro.2015.10.109 ↗
44. Properties of pervious concrete containing recycled concrete block aggregate and recycled concrete aggregate10.1016/j.conbuildmat.2016.02.060 ↗
45. TS EN 197-1, Cement-Part 1: General Cements-Composition, Features and Eligibility Criteria, Turkish Standards Institute, Ankara, 2002 (in Turkish).
46. TS EN 12350-2, Concrete-Fresh Concrete Experiments-Part 2: Slump Test, Turkish Standards Institute, Ankara, 2002 (in Turkish).
47. TS EN 12390-3, Concrete-Hardened Concrete Tests-Part 3: Determination of compressive strength in test specimens, Turkish Standards Institute, Ankara, 2003 (in Turkish).
48. TS EN 12390-6, Concrete-Hardened Concrete Tests-Part 3: Determination of splitting tensile strength of test specimens, Turkish Standards Institute, Ankara, 2010 (in Turkish).
49. Effects of basalt aggregates on concrete properties
50. Performance of structural lightweight concrete containing metakaolin after elevated temperature10.1007/s12205-019-1192-x ↗
51. Optimization of steel fiber reinforced concretes by means of statistical response surface method10.1016/S0958-9465(03)00161-6 ↗
52. Mechanical characteristics investigation of polymer concrete using mixture design of experiments and response surface method10.3923/jas.2008.2242.2249 ↗
53. Design-expert software, Version 10. Inc., S.-E, Minneapolis, MN, USA, 2016. http://www.statease.com.
54. Prediction of the compressive strength of normal and high-performance concretes using M5P model tree algorithm10.1016/j.conbuildmat.2017.03.061 ↗
55. Optimization of the water-based road-marking paint by experimental design, mixture method10.1016/j.porgcoat.2006.01.006 ↗