journal article·2020-11

Mesoscale numerical simulation of fracture of cement treated base material during semi circular bending test with discrete element model

Qiao Dong, Debiao Zheng, Xiaokang Zhao, Xueqin Chen, Yongfeng Chen

Publisher page

Abstract

Abstract The fracture of Cement Treated Base (CTB) is greatly influenced by its mesoscale structure and characteristics. The Discrete Element Method (DEM) was adopted to build a mesoscale Semicircular Bending (SCB) model of CTB. The DEM models were built based on two methods including the Digital Image Process (DIP) of actual aggregate distribution and randomization algorithm to generate aggregates. The mesoscale heterogeneity of the model consisted of aggregates, cement mortar, Interface Transition Zone (ITZ) and air voids. Analysis results showed that the DEM models based on both DIP and randomization with the Linear Parallel Bond Model (LPBM) presented satisfying results, compared with laboratory tests. It was found that the main cracks occurred along ITZ between mortar and aggregates. The gradation and distribution of aggregate, and air voids have all significant influence on the fracture resistance and the crack propagation of the CTB. The lime-ash treated material simulation results showed relatively higher fracture toughness over strength ratio.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Geotechnical Engineering and Soil Stabilization · Geotechnical Engineering and Underground Structures · Grouting, Rheology, and Soil Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Cold recycling of lime-fly ash stabilized macadam mixtures as pavement bases and subbases10.1016/j.conbuildmat.2018.03.030 ↗
2. Study on fracture toughness of cement treated aggregate10.4028/www.scientific.net/AMR.280.76 ↗
3. L. Brumlibardi, WalterBaldo, J.o. Baptista, The effect of aggregate aspect ratio and temperature on the fracture toughness of a low cement refractory concrete, Mater. Res. 6(4) (2003): 545–550.10.1590/S1516-14392003000400021 ↗
4. Reliability assessment of flexural fatigue failure of asphalt mixture: a new perspective10.1016/j.conbuildmat.2020.119553 ↗
5. Effects of geosynthetics on reduction of reflection cracking in asphalt overlays10.1016/j.geotexmem.2008.05.007 ↗
6. Reflection cracking in asphalt overlays
7. Degradation reliability modeling of stabilized base course materials based on a modulus decrement process10.1016/j.conbuildmat.2018.05.129 ↗
8. Shrinkage performance of cement-treated macadam base materials10.1061/41123(383)132 ↗
9. T. Yamanouchi, Some studies on the cracking of soil-cement in Japan, 1973.
10. Development of cement-treated base material for reducing shrinkage cracks10.1177/0361198106195200115 ↗
11. Leaching and microstructural properties of lead contaminated kaolin stabilized by GGBS-MgO in semi-dynamic leaching tests10.1016/j.conbuildmat.2018.03.164 ↗
12. Investigating the performance, chemical, and microstructure properties of carbon nanotube-modified asphalt binder10.1080/14680629.2017.1323661 ↗
13. Mechanical and microstructural characteristics of different interfaces in cold recycled mixture containing cement and asphalt emulsion
14. Hydraulic conductivity and self-healing performance of engineered cementitious composites exposed to acid mine drainage10.1016/j.scitotenv.2020.137095 ↗
15. Research on the aging and rejuvenation mechanisms of asphalt using atomic force microscopy10.1016/j.conbuildmat.2018.02.008 ↗
16. Micromechanical investigation of Portland cement paste10.1016/j.conbuildmat.2014.08.017 ↗
17. Parametric modeling and structure verification of asphalt pavement based on BIM-ABAQUS10.1016/j.autcon.2019.103066 ↗
18. Meso-scale cracking behavior of cement treated base material10.1016/j.conbuildmat.2019.117823 ↗
19. Crack modeling of bituminous materials using extrinsic nonlinear viscoelastic cohesive zone (NVCZ) model10.1016/j.conbuildmat.2019.01.215 ↗
20. Evaluation of interfacial bond strength between Portland cement concrete and asphalt concrete layers using bi-material SCB test specimen10.5267/j.esm.2017.8.001 ↗
21. Simulation of wheel tracking test for asphalt mixture using discrete element modelling10.1080/14680629.2016.1261725 ↗
22. Impacts of air-void structures on the rutting tests of asphalt concrete based on discretized emulation10.1016/j.conbuildmat.2018.01.141 ↗
23. Heterogeneity effect of mechanical property on creep behavior of asphalt mixture based on micromechanical modeling and virtual creep test10.1016/j.mechmat.2016.10.003 ↗
24. Computational technology for analysis of 3D meso-structure effects on damage and failure of concrete10.1016/j.ijsolstr.2015.11.018 ↗
25. X. Liu, X. Chang, W. Zhou, S. Li, PFC2D simulation of thermally induced cracks in concrete specimens, 1542(1) (2013) 261–264.10.1063/1.4811917 ↗
26. W. Song, Laboratory investigation and discrete element analysis in open-graded friction course and railway crosstie-ballast interaction, Department of Civil and Environmental Engineering, University of Tennessee, 2017.
27. Discrete element simulations of direct shear tests with particle angularity effect10.1007/s10035-015-0593-x ↗
28. Characterizing air void effect on fracture of asphalt concrete at low-temperature using discrete element method
29. Modelling of concrete behaviour in uniaxial compression and tension with DEM10.1007/s10035-015-0546-4 ↗
30. J.Y. Jia, X. Gu, A 3D mesoscopic model for simulating failure process of concrete based on discrete element method, 2016.10.1007/978-981-10-1926-5_52 ↗
31. Two-dimensional X-ray CT image based meso-scale fracture modelling of concrete10.1016/j.engfracmech.2014.10.016 ↗
32. Internal structure characterization of asphalt concrete using image analysis10.1061/(ASCE)0887-3801(1999)13:2(88) ↗
33. Relationship between the representative volume element and mechanical properties of asphalt concrete10.1061/(ASCE)0899-1561(2001)13:1(77) ↗
34. A.A. Alomari, L. Tashman, E. Masad, A. Cooley, T. Harman, Proposed methodology for predicting HMA permeability, asphalt paving technology: association of asphalt paving technologists, in: Proceedings of the Technical Sessions 71(1) (2002) 30–58.
35. Multiresolution-based watersheds for efficient image segmentation10.1016/S0167-8655(02)00270-2 ↗
36. Use of artificial neural networks to detect aggregates in poor-quality X-Ray CT images of asphalt concrete
37. A volumetrics thresholding algorithm for processing asphalt concrete X-ray CT images10.1080/10298436.2011.561345 ↗
38. Heterogeneous fracture simulation of asphalt mixture under SCB test with cohesive crack model
39. Characterization of two-parameter fracture properties of portland cement concrete containing reclaimed asphalt pavement aggregates by semicircular bending specimens10.1016/j.cemconcomp.2018.10.013 ↗
40. Long-term mechanical properties of in situ semi-rigid base materials
41. Effect of the contact structure characteristics on rutting performance in asphalt mixtures using 2D imaging analysis10.1016/j.conbuildmat.2016.12.210 ↗
42. Evaluating the mastic distribution of asphalt mixtures based on a new thickness threshold using 2D image planers
43. Long-term mechanical properties of in situ semi-rigid base materials
44. Shrinkage cracking of cement treated demolition waste as a road base10.1617/s11527-015-0524-7 ↗
45. P. Jitsangiam, K. Nusit, S. Chummuneerat, P. Chindaprasirt, P. Pichayapan, Fatigue assessment of cement-treated base for roads: an examination of beam-fatigue tests, J. Mater. Civil Eng. 28(10) (2016) 04016095.1–04016095.11.10.1061/(ASCE)MT.1943-5533.0001601 ↗
46. Undrained triaxial behavior of cement treated marine clay10.1007/s10706-012-9605-3 ↗
47. Compressive strength of cement-based composites: roles of aggregate diameter and water saturation degree10.1016/j.cemconcomp.2012.08.001 ↗
48. Rubber modified concrete improved by chemically active coating and silane coupling agent
49. Bell · 1993
50. S. Yu, J. Wei, S. Ma, Study on fatigue life of lime fly-ash treated aggregate based on SHRP standard, in: J. Zhao (Ed.), Advances in Building Materials, Pts 1-32011, pp. 111–114.10.4028/www.scientific.net/AMR.261-263.111 ↗
51. Numerical evaluation of semicircular bending test variability10.1061/(ASCE)MT.1943-5533.0002265 ↗
52. Experimental and numerical simulating of the crack separation on the tensile strength of concrete