journal article·2020-12Open access

Characterization and correlation analysis of mechanical properties and electrical resistance of asphalt emulsion cold-mix asphalt

Rui Li, Zhen Leng, Yongli Wang, Fuliao Zou

Abstract

Abstract Asphalt emulsion cold-mix asphalt (CMA) is generally characterized as an evolutive material, with its mechanical strength increasing with curing time. This study aims to characterize the development of the mechanical properties of asphalt emulsion CMA mixtures during the curing process and correlate them with their evolutive electrical resistances. To achieve this objective, the moisture loss, Marshall stability, indirect tensile strength (ITS), indirect tensile stiffness modulus (ITSM) and electrical impedance of CMA mixtures containing various percentages of Portland cement were evaluated at different curing times up to 28 days. These evolutive properties were then analyzed and their relationships were explored. It was found the mechanical performance of CMA was considerably improved by cement, and there were liner relationships between the Marshall stability, ITS and ITSM irrespective of cement content. Furthermore, the mechanical performance was closely related with the electrical resistance of each CMA mixture containing different amounts of cement, suggesting that it is potentially feasible to predict the evolutive mechanical performance of CMA from electrical resistance which can be measured non-destructively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Rupturing of bitumen-in-water emulsions: experimental evidence for viscous sintering phenomena10.1016/S0927-7757(00)00699-3 ↗
2. Effect of salt concentration on the phase separation of bitumen emulsions10.1016/j.colsurfa.2013.02.041 ↗
3. Pavement engineering materials: review on the use of warm-mix asphalt10.1016/j.conbuildmat.2012.06.038 ↗
4. Warm mix asphalt: an overview10.1016/j.jclepro.2011.11.053 ↗
5. T. Saadoon, A. Garcia, and B. Gómez-Meijide, “Dynamics of water evaporation in cold asphalt mixtures,” Materials & Design, vol. 134, pp. 196-206, 2017/11/15/ 2017, doi: https://doi.org/10.1016/j.matdes.2017.08.040.10.1016/j.matdes.2017.08.040 ↗
6. Evaluation of sustainable technologies that upgrade the binder performance grade in asphalt pavement construction10.1016/j.matdes.2016.01.065 ↗
7. Asphalt cold mix manual, 3rd ed. (no. 14). Lexington, USA: Asphalt Institute, 1997.
8. Influence of curing on cold mix mechanical performance10.1007/BF02481685 ↗
9. Fracture behaviour of bitumen emulsion mortar mixtures10.1016/j.conbuildmat.2014.03.034 ↗
10. Mechanical properties of an upgrading cold-mix asphalt using waste materials10.1061/(ASCE)MT.1943-5533.0000540 ↗
11. Performance evaluation of cold in-place recycling mixtures using emulsified asphalt based on dynamic modulus, flow number, flow time, and raveling loss10.1007/s12205-012-1376-0 ↗
12. Resilient moduli response of moderately cement-treated reclaimed asphalt pavement aggregates10.1061/(ASCE)MT.1943-5533.0000268 ↗
13. Reduction of moisture susceptibility of cold asphalt mixture with Portland cement and bentonite nanoclay additives10.1016/j.jclepro.2017.12.163 ↗
14. Experimental characterization of high-performance fiber-reinforced cold mix asphalt mixtures10.1016/j.conbuildmat.2014.01.089 ↗
15. Experimental cold in-place recycling with hydrated lime10.3141/1684-22 ↗
16. Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsion10.1016/j.conbuildmat.2008.07.020 ↗
17. A comparative study for improving the mechanical properties of cold bituminous emulsion mixtures with cement and waste materials10.1016/j.conbuildmat.2012.06.032 ↗
18. A. I. Nassar, M. K. Mohammed, N. Thom, and T. Parry, “Mechanical, durability and microstructure properties of Cold Asphalt Emulsion Mixtures with different types of filler,” Construction and Building Materials, vol. 114, pp. 352-363, 2016/07/01/ 2016, doi: https://doi.org/10.1016/j.conbuildmat.2016.03.112.10.1016/j.conbuildmat.2016.03.112 ↗
19. J. Yan, Z. Leng, F. Li, H. Zhu, and S. Bao, “Early-age strength and long-term performance of asphalt emulsion cold recycled mixes with various cement contents,” Construction and Building Materials, vol. 137, pp. 153-159, 2017/04/15/ 2017, doi: https://doi.org/10.1016/j.conbuildmat.2017.01.114.10.1016/j.conbuildmat.2017.01.114 ↗
20. Cold recycling of reclaimed asphalt pavement towards improved engineering performance
21. Interaction mechanism of cement and asphalt emulsion in asphalt emulsion mixtures10.1617/s11527-013-0118-1 ↗
22. Effect of cement on emulsified asphalt mixtures10.1007/s11665-007-9095-2 ↗
23. Micro hardness of interface between cement asphalt emulsion mastics and aggregates10.1617/s11527-009-9502-2 ↗
24. Mechanical properties of an upgrading cold-mix asphalt using waste materials10.1061/(ASCE)MT.1943-5533.0000540 ↗
25. A. Graziani, C. Godenzoni, F. Cardone, and M. Bocci, “Effect of curing on the physical and mechanical properties of cold-recycled bituminous mixtures,” Materials & Design, vol. 95, pp. 358-369, 2016/04/05/ 2016, doi: https://doi.org/10.1016/j.matdes.2016.01.094.10.1016/j.matdes.2016.01.094 ↗
26. A procedure for characterizing the curing process of cold recycled bitumen emulsion mixtures10.1016/j.conbuildmat.2018.04.091 ↗
27. Electrical conductivity of drying cement paste10.1617/s11527-006-9211-z ↗
28. Water absorption and electrical conductivity for internally cured mortars with a W/C between 0.30 and 0.4510.1061/(ASCE)MT.1943-5533.0000377 ↗
29. H. Sun et al., “Investigating drying behavior of cement mortar through electrochemical impedance spectroscopy analysis,” Construction and Building Materials, vol. 135, pp. 361-368, 2017/03/15/ 2017, doi: https://doi.org/10.1016/j.conbuildmat.2016.12.196.10.1016/j.conbuildmat.2016.12.196 ↗
30. J. M. Cruz, I. C. Fita, L. Soriano, J. Payá, and M. V. Borrachero, “The use of electrical impedance spectroscopy for monitoring the hydration products of Portland cement mortars with high percentage of pozzolans,” Cement and Concrete Research, vol. 50, pp. 51-61, 2013/08/01/ 2013, doi: https://doi.org/10.1016/j.cemconres.2013.03.019.10.1016/j.cemconres.2013.03.019 ↗
31. M. A. Montoya, W. Jason Weiss, and J. E. Haddock, “Using electrical resistance to evaluate the chip seal curing process,” Road Materials and Pavement Design, vol. 18, no. sup4, pp. 98-111, 2017/11/24 2017, doi: 10.1080/14680629.2017.1389090.10.1080/14680629.2017.1389090 ↗
32. T. A. Doyle, C. McNally, A. Gibney, and A. Tabaković, “Developing maturity methods for the assessment of cold-mix bituminous materials,” Construction and Building Materials, vol. 38, pp. 524-529, 2013/01/01/ 2013, doi: https://doi.org/10.1016/j.conbuildmat.2012.09.008.10.1016/j.conbuildmat.2012.09.008 ↗
33. J. Ouyang, L. Hu, W. Yang, and B. Han, “Strength improvement additives for cement bitumen emulsion mixture,” Construction and Building Materials, vol. 198, pp. 456-464, 2019/02/20/ 2019, doi: https://doi.org/10.1016/j.conbuildmat.2018.11.280.10.1016/j.conbuildmat.2018.11.280 ↗
34. Impact of rapid-hardening cements on mechanical properties of cement bitumen emulsion asphalt10.1617/s11527-014-0512-3 ↗
35. Design issues for the michaelis-menten model10.1006/jtbi.2001.2497 ↗
36. Die kinetik der invertinwirkung [the kinetics of invertase effective]
37. Laboratory fatigue models for recycled mixes with bitumen emulsion and cement10.1016/j.conbuildmat.2010.04.009 ↗
38. Evaluating moisture susceptibility of cold-mix asphalt10.3141/2446-07 ↗
39. C. Ling, A. Hanz, and H. Bahia, “Measuring moisture susceptibility of Cold Mix Asphalt with a modified boiling test based on digital imaging,” Construction and Building Materials, vol. 105, pp. 391-399, 2016/02/15/ 2016, doi: https://doi.org/10.1016/j.conbuildmat.2015.12.093.10.1016/j.conbuildmat.2015.12.093 ↗
40. A study of cement modified bitumen emulsion mixtures
41. Influence of cement content and environmental humidity on asphalt emulsion and cement composites performance10.1617/s11527-012-9971-6 ↗
42. Equivalent circuit model for AC electrochemical impedance spectroscopy of concrete10.1016/S0008-8846(00)00400-2 ↗
43. The use of electrical impedance spectroscopy for monitoring the hydration products of Portland cement mortars with high percentage of pozzolans10.1016/j.cemconres.2013.03.019 ↗