Development of a testing methodology for the design and quality control of carbon fiber reinforced polymer (CFRP) anchors
Source abstract
Abstract
Abstract Using CFRP anchors to prevent the premature debonding failure of CFRP strips from concrete substrate is gaining acceptance. Although adequate CFRP anchors can fully develop the strength of CFRP strips, few recommendations for designing CFRP anchors are available. Based on experimental results obtained from 38 tests, a testing methodology using design strip strength is presented to evaluate the quality of CFRP anchors and to identify the design parameters including the strength ratio of CFRP anchor to CFRP strip, the strip width, the concrete strength, the fan angle, the embedment length, the bend radius, the hole diameter, the CFRP patch, the bond length and the bond condition. Design recommendations and installation procedures are also presented to ensure the desired performance of the anchorage system.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. A new bond-slip model for adhesive in CFRP-steel composite systems10.1016/j.engstruct.2011.08.037 ↗
2. Investigation of sub-critical fatigue crack growth in FRP/concrete cohesive interface using digital image analysis10.1016/j.compositesb.2013.02.015 ↗
3. Bond between FRP composites and concrete: assessment of design procedures and analytical models10.1016/j.compositesb.2013.12.075 ↗
4. Strength and ductility of reinforced concrete moment frame connections strengthened with quasi-isotropic laminates10.1016/S1359-8368(99)00068-2 ↗
5. Shear strengthening of reinforced concrete beams using carbon-fiber-reinforced polymer laminates10.1061/(ASCE)1090-0268(2005)9:2(158) ↗
6. Shear enhancement of reinforced concrete beams strengthened with FRP composite laminates10.1016/j.compositesb.2006.10.002 ↗
7. Bio-based resins for flexural strengthening of reinforced concrete beams with FRP sheets10.1016/j.conbuildmat.2016.11.110 ↗
8. Mechanical behavior of concrete–resin/adhesive–FRP structural assemblies under low and high temperatures10.1016/j.conbuildmat.2015.12.127 ↗
9. Behavioral trends of RC beams strengthened with externally bonded FRP10.1061/(ASCE)1090-0268(2001)5:2(102) ↗
10. S.L. Orton, Development of a CFRP system to provide continuity in existing reinforced concrete structures vulnerable to progressive collapse. Ph.D. dissertation, America: The University of Texas at Austin, 2007.
11. Behavior of anchored carbon fiber reinforced polymer(CFRP) strips on strengthening reinforced concrete structures
12. Bond behavior between fiber-reinforced polymer laminates and concrete
13. Anchorage strength models for FRP and steel plates bonded to concrete10.1061/(ASCE)0733-9445(2001)127:7(784) ↗
14. Intermediate crack-induced debonding in RC beams and slabs10.1016/S0950-0618(03)00043-6 ↗
15. Experimental study on FRP-to-concrete bonded joints10.1016/j.compositesb.2004.06.001 ↗
16. Bond-slip models for FRP sheets/plates bonded to concrete10.1016/j.engstruct.2005.01.014 ↗
17. Development of a simplified bond model used for simulating FRP strips bonded to concrete10.1016/j.compstruct.2017.03.066 ↗
18. Numerical studies on the entire debonding propagation process of FRP strips externally bonded to the concrete substrate10.1016/j.conbuildmat.2017.05.117 ↗
19. Strengthening of reinforced concrete beams with carbon FRP
20. A.J. Lamanna, Flexural strengthening of reinforced concrete beams with mechanically fastened fiber reinforced polymer strips. Ph.D. dissertation, America, The University of Wisconsin, Madison, WI, 2002.
21. Hybrid bonding of FRP to reinforced concrete structures10.1061/(ASCE)1090-0268(2008)12:3(266) ↗
22. Shear-bending interaction in debonding failures of FRP-plated RC beams10.1260/136943303322419214 ↗
23. Coupled flexural-shear retrofitting of RC beams using CFRP straps10.1016/j.compstruct.2006.04.037 ↗
24. Prediction models for debonding failure loads of carbon fiber reinforced polymer retrofitted reinforced concrete beams10.1061/(ASCE)1090-0268(2006)10:1(48) ↗
25. A prediction model for bidirectional fiber patch anchors used to enhance the performance of FRP materials bonded to concrete10.1016/j.compstruct.2014.05.034 ↗
26. Advanced wrapping system with CF anchor—stress transfer mechanism of CF-anchor
27. Strength of RC cantilever slabs bonded with GFRP strips10.1061/(ASCE)1090-0268(2001)5:4(221) ↗
28. Effectiveness of CFRP strengthening on curved soffit RC beams10.1260/1369433053749607 ↗
29. I.S. Kim, Use of CFRP to provide continuity in existing reinforced concrete members subjected to extreme loads, Ph.D. dissertation, America: The University of Texas at Austin, 2008.
30. Advances on the behavior characterization of FRP-anchored carbon fiber-reinforced polymer (CFRP) sheets used to strengthen concrete elements10.1007/s40069-013-0028-1 ↗
31. Influence of FRP anchors on the strength and ductility of FRP-Strengthened RC slabs10.1016/j.conbuildmat.2013.02.006 ↗
32. Y.G. Kim, Shear behavior of reinforced concrete T-beams strengthened with carbon fiber reinforced polymer (CFRP) sheets and CFRP anchors, Ph.D. dissertation, America: The University of Texas at Austin, 2011.
33. H.W. Zhang, Influence of FRP anchors on FRP-to-concrete bonder interfaces, Ph.D. dissertation, China: The University of Hong Kong, 2013.
34. C. Niemitz, Anchorage of carbon fiber reinforced polymers to reinforced concrete in shear applications. Master’s thesis, America: The University of Massachusetts at Amherst, 2008.
35. G. Özdemir, Mechanical properties of CFRP anchorages, Master’s thesis, Turkey: The Middle East Technical University at Istanbul, 2005.
36. L.T. Pham, Development of a quality control test for carbon fiber reinforced polymer anchors, Master’s thesis, America: The University of Texas at Austin, 2009.
37. E.F. Gomez, Quality control test for carbon fiber reinforced polymer (CFRP) anchors for rehabilitation, Master’s thesis, America: The University of Texas at Austin, 2010.
38. ASTM. International. C293-07. Standard test method for flexural strength of concrete using 428 simple beam with center-point loading, 2007, p. 3.
39. Modeling of anchored CFRP strips bonded to concrete10.1016/j.conbuildmat.2015.03.096 ↗
40. American Concrete Institute. ACI 318-14. Building code requirements for structural concrete. 2014.
41. H.H. Wang, Test of Glass Fiber Reinforced Polymer (GFRP) Anchors, Master’s thesis, America: The University of Texas at Austin, 2013.
42. American Concrete Institute. ACI 440.2R-08. Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures, 2008, Farmington Hills, MI.
43. American Concrete Institute, ACI 440.1R-06. Guide for the design and construction of concrete reinforced with FRP bar, 2008. Farmington Hills, MI.
44. W. Sun, Behavior of carbon fiber reinforced polymer (CFRP) anchors strengthening reinforced concrete structures, Ph.D. dissertation, America: The University of Texas at Austin, 2014.