journal article·2017-10

Evaluation of oil sludge as an alternative fuel in the production of Portland cement clinker

Minrui Huang, Xianbin Ying, Dongsheng Shen, Huajun Feng, Na Li, Yuyang Zhou, Yuyang Long

Publisher page

Abstract

Abstract The use of oil sludge as an alternative fuel during clinker production was evaluated. It was found that 14% oil sludge could be added to raw mixture and that variations in the mode of oil sludge addition had no obvious effect on the combustibility of the mixture or the cement quality, such that all cement samples satisfied the P.O 42.5 standard. It was also determined that 90.98% of coal could be replaced by oil sludge. The concentration of VOCs decreased as the calcination temperature was raised. So the adding points with high temperature (>1450 °C) are recommended for oil sludge utilization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Metal Extraction and Bioleaching · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Devolatilization of oil sludge in a lab-scale bubbling fluidized bed10.1016/j.jhazmat.2010.10.032 ↗
2. Oxidation of oily sludge in supercritical water10.1016/j.jhazmat.2008.10.008 ↗
3. Adnan · 2009
4. Microbial degradation of waste hydrocarbons in oily sludge from some romanian oil fields10.1016/S0920-4105(98)00064-3 ↗
5. Oily sludge degradation by bacteria from ankleshwar, India10.1016/j.ibiod.2006.02.004 ↗
6. Recent development in the treatment of oily sludge from petroleum industry: a review10.1016/j.jhazmat.2013.07.069 ↗
7. Separation of oil from oily sludge by freezing and thawing10.1016/S0043-1354(99)00005-6 ↗
8. Effects of ultrasound on oily sludge deoiling
9. M. Shen, J. Li, Solvent extraction for recovery of crude oil from oily sludge. Environ. Pollut. Control. (2008).
10. Alternative fuels for the cement industry10.1016/S0306-2619(02)00135-6 ↗
11. The effect of using thermally dried sewage sludge as an alternative fuel on portland cement clinker production10.1016/j.jclepro.2013.02.026 ↗
12. Feasibility of disposing waste glyphosate neutralization liquor with cement rotary kiln10.1016/j.jhazmat.2014.06.017 ↗
13. Use of scrap tires in cement production and their impact on nitrogen and sulfur oxides emissions10.1080/15567036.2013.787473 ↗
14. Activated carbon as an alternative fuel. effect of carbon ash on cement clinkerization10.1016/j.jclepro.2016.01.093 ↗
15. Shi, et al., Experiments of utilization of sluge as the secondary fuel for calcination of cement clinker. Fly Ash Comprehensive Utilization (2014) (in Chinese).
16. The effect of using thermally dried sewage sludge as an alternativefuel on portland cement clinker production10.1016/j.jclepro.2013.02.026 ↗
17. Characteristics of oily sludge combustion in circulating fluidized beds10.1016/j.jhazmat.2009.04.109 ↗
18. Shen · 2012
19. Calculation of the compounds in portland cement10.1021/ac50068a006 ↗
20. Utilization of municipal solid waste incineration ash in portland cement clinker10.1007/s10098-011-0367-z ↗
21. Methods for chemical analysis of cement (GB/T 176-2008), 2008.
22. Test methods for water requirement of normal consistency, setting time and soundness of the portland cements (GB1346-2001), 2001.
23. Method of testing cements- determination of strength (GB/T 17671-1999), 1999.
24. Determination of calorific value of coal (GB/T 213-2008), 2008.
25. Determination of calorific value of petroleum products (GB/T 384-1981), 1981.
26. Emission from stationary sources-sampling of volatile organic compounds-bags method (HJ 732-2014), 2014.
27. Stationary source emission-determination of volatile organic compounds-sorbent adsorption and thermal desorption gas chromatography mass spectrometry method.(HJ 734-2014), 2014.
28. Portland cement clinker (GB/T 21372-2008), 2008.
29. Common portland cement (GB 175-2007), 2007.
30. Cement production technology improvement compared to factor 4 objectives10.1016/j.cemconres.2009.09.031 ↗
31. A life-cycle assessment of portland cement manufacturing: comparing the traditional process with alternative technologies10.1016/j.jclepro.2008.04.007 ↗
32. Alternative fuels in cement manufacturing: modeling for process optimization under direct and compound operation10.1016/j.fuel.2012.03.036 ↗
33. Use of alternative fuels in the polish cement industry10.1016/S0306-2619(02)00136-8 ↗