Definition of optimal parameters for supercritical carbonation treatment of vegetable fiber-cement composites at a very early age
Source abstract
Abstract
Abstract This paper presents a study of cellulose pulp fiber-cement composites subjected to supercritical carbonation at a very early age. The raw materials used for the creation of cementitious composite mixes include: Portland cement, limestone filler, and cellulose pulp. Composites were produced by a slurry vacuum dewatering process and subjected to curing conditions which studied the effect of supercritical carbonation concentration (0% and close to 100% of CO2), the effect of cellulosic pulp (unbleached or bleached), and durability. All samples were subjected to mechanical, physical, and microstructural tests. The initial period of thermal curing (varying from 24 h to 48 h) and exposure time to carbonation (from 1 h to 2 h), did not have a statistically significant effect on the mechanical performance of the composites. However, the flexural test results of carbonated composites reinforced with bleached pulp showed a statistically significant improvement when compared to unbleached pulp reinforcement (24% increased average modulus of rupture). Thus, for cementitious composites cured with supercritical carbonation, the use of bleached cellulosic pulp, 24 h of thermal hydration and 1 h in an environmental chamber provided the optimal curing conditions and the most desirable properties in this study.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Concrete and Cement Materials Research · Lignin and Wood Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Microstructure and mechanical properties of waste fibre–cement composites10.1016/j.cemconcomp.2004.09.009 ↗
2. Effect of accelerated carbonation on cementitious roofing tiles reinforced with lignocellulosic fibre10.1016/j.conbuildmat.2007.11.018 ↗
3. Filho, Cellulosic fiber reinforced cement-based composites: A review of recent research10.1016/j.conbuildmat.2015.01.035 ↗
4. Comportamento à compressão de argamassas reforçadas com fibras vegetais da Amazônia/Behavior of cement mortars reinforced with Amazonian fibers subjected to compression
5. A review of accelerated carbonation technology in the treatment of cement-based materials and sequestration of CO2
6. Durability of concrete pipes subjected to combined steam and carbonation curing10.1016/j.conbuildmat.2011.03.025 ↗
7. SF, R. Schmidt, A.E.F. Almeida, G.H.D Tonoli, H. Savastano Jr, Supercritical carbonation treatment on extruded fibre–cement reinforced with vegetable fibres
8. Modification of composition and microstructure of Portland cement pastes as a result of natural and supercritical carbonate procedures10.1021/ie0603363 ↗
9. The experimental investigation of concrete carbonation depth10.1016/j.cemconres.2004.07.025 ↗
10. Supercritical carbonation of calcareous composites: influence of curing10.1016/j.cemconcomp.2013.06.008 ↗
11. Effects of accelerated carbonation on the microstructure of Portland cement pastes containing reactive MgO10.1016/j.cemconres.2012.02.017 ↗
12. Effect of accelerated carbonation on the microstructure and physical properties of hybrid fiber-cement composites10.1016/j.mineng.2013.11.007 ↗
13. Improved durability of vegetable fiber reinforced cement composite subject to accelerated carbonation at early age10.1016/j.cemconcomp.2013.05.001 ↗
14. The role of moisture in the carbonation of cementitious materials
15. Evaluation of cellulosic pulps treated by hornification as reinforcement of cementitious composites10.1016/j.conbuildmat.2015.09.044 ↗
16. American Society for Testing and Materials – ASTM C150/C150 M-11. Standard specification for Portland cement, 2011.
17. Bentur · 1990
18. Potential of bamboo organosolv pulp as a reinforcing element in fiber–cement materials10.1016/j.conbuildmat.2014.09.005 ↗
19. Brazilian waste fibers as reinforcement for cement-based composites10.1016/S0958-9465(00)00034-2 ↗
20. Extracts from pitanga (Eugenia uniflora L.) leaves: influence of extraction process on antioxidant properties and yield of phenolic compounds10.1016/j.supflu.2010.09.001 ↗
21. Cellulose modified fibres in cement based composites10.1016/j.compositesa.2009.09.016 ↗
22. European Committee for Standardization · 1994
23. American Society for Testing and Materials – ASTM C948–81 · 2009 · 2009
24. Biodegradable composites based on lignocellulosic fibers – an overview10.1016/j.progpolymsci.2008.12.002 ↗
25. Hydration reaction and hardening of calcined clays and related minerals: I. Preliminary investigation on metakaolin10.1016/0008-8846(83)90109-6 ↗
26. Hydration characteristics of metakaolin– lime–gypsum10.1016/0040-6031(85)87106-9 ↗
27. Hydration of cements based on metakaolin: thermochemistry10.1680/adcr.1990.3.12.167 ↗
28. The effect of temperature on the hydration rate and stability of the hydration phases of metakaolin-lime-water syatems10.1016/S0008-8846(01)00642-1 ↗
29. J.R. Du Manoir, P. Dubelsten, “Pulp bleaching process comprising oxygen delignification and xylanase enzyme treatment.” U.S. Patent No. 5,179,021, 12 Jan. 1993.
30. Sjöström · 1993
31. Dence · 1996
32. Grinding process for the production of nanofibrillated cellulose based on unbleached and bleached bamboo organosolv pulp10.1007/s10570-016-0996-9 ↗
33. J, C. Meyer, Degradation mechanisms of natural fiber in the matrix of cement composites10.1016/j.cemconres.2015.02.019 ↗
34. Elastic modulus and stress-transfer properties of tunicate cellulose whiskers10.1021/bm049291k ↗
35. Effect of beating on recycled properties of unbleached eucalyptus cellulose fiber10.1016/j.carbpol.2011.08.051 ↗
36. Cellulose acquirement evaluation methods with different degrees of crystallinity
37. Durability of lignocellusic fibers treated with vegetable oil-phenolic resin10.1016/j.carbpol.2011.09.070 ↗
38. Treatments of plant biomass for cementitious building materials - a review10.1016/j.conbuildmat.2016.05.125 ↗
39. Surface properties of eucalyptus pulp fibres as reinforcement of cement-based composites
40. V.S. Ramachandran, J.J. Beaudoin, Handbook of Analytical Techniques in Concrete Science and Technology, William Andrew Publishing/Noyes, 2001.
41. Differential scanning calorimetry study of ordinary Portland cement10.1016/S0008-8846(99)00128-3 ↗
42. Kinetics of hydration of tricalciumsilicate in presence of calcium chloride by thermal methods10.1016/0040-6031(71)85023-2 ↗
43. Characterization and modeling of pores and surfaces in cement paste: correlations to processing and properties10.3151/jact.6.5 ↗
44. Solubility and structure of calcium silicate hydrate10.1016/j.cemconres.2004.04.034 ↗
45. New insights on the use of supercritical carbon dioxide for the accelerated carbonation of cement pastes10.1016/j.supflu.2007.07.018 ↗
46. Determination of the kinetic parameters of the rection between SO2 and CaO using the thermogravimetric technique10.1016/0040-6031(91)80370-X ↗
47. Carbonation of CH and C–S–H in composite cement pastes containing high amounts of BFS10.1016/j.cemconres.2009.10.020 ↗
48. Determination of the critical product layer thickness in the reaction of CaO with CO210.1021/ie050305s ↗
49. Structural features of C-S-H(I) and its carbonation in air – a Raman spectroscopic study. Part II: carbonated phases10.1111/j.1551-2916.2006.01429.x ↗
50. Effect of synthesis procedure on carbonation of calcium-silicate-hydrate
51. Potential of alternative fiber cements as building materials for developing areas10.1016/S0958-9465(02)00071-9 ↗
52. Microstructure and mechanical properties of waste fiber–cement composites10.1016/j.cemconcomp.2004.09.009 ↗