journal article·2018-01

Recycling of desulfurization slag for the production of autoclaved aerated concrete

Ying-Liang Chen, Ming-Sheng Ko, Juu-En Chang, Chun-Ta Lin

Publisher page

Abstract

Abstract The purpose of this study was to reuse desulfurization (De-S) slag in the production of autoclaved aerated concrete (AAC). The non-magnetic fraction of De-S slag is rich in calcium and silicon compounds, and therefore suitable to be an alternative raw material for AAC production. The calcium compounds in the De-S slag used in this study were Ca(OH)2, CaCO3, γ-Ca2SiO4, and CaF2 rather than CaO, and they affected the foaming of AAC mortars due to the insufficient alkalinity. Using 0.17 M NaOH(aq) to replace water or calcining the De-S slag in advance both improved the foaming of mortars, and thus obtained AAC products with stable properties. The formation and morphology of tobermorite in AAC were altered by the addition of De-S slag, probably due to the foreign ions introduced by the slag. The changes in tobermorite should also be related to the decline in the compressive strength of AAC specimens.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Turkdogan · 1996
2. Potential reuse of slag from the Kambara reactor desulfurization process of iron in an acidic mine drainage treatment10.1061/(ASCE)EE.1943-7870.0000841 ↗
3. Pelletizing steel mill desulfurization slag10.1016/S0301-7516(01)00073-4 ↗
4. Reusing pretreated desulfurization slag to improve clinkerization and clinker grindability for energy conservation in cement manufacture10.1016/j.jenvman.2010.04.006 ↗
5. Beneficial reuse of desulfurization slag
6. Alternative materials: pyroprocessing
7. Recycling of steelmaking slag fines by weak magnetic separation coupled with selective particle size screening10.1016/j.jclepro.2014.06.092 ↗
8. Engineering properties of cementless concrete produced from GGBFS and recycled desulfurization slag10.1016/j.conbuildmat.2014.04.017 ↗
9. Hwang · 2006
10. Study of the volume stability of slag cement mortar applied to desulfurization slag during high temperature operation10.1016/j.conbuildmat.2017.02.085 ↗
11. Engineering properties of controlled low strength desulfurization slags (CLSDS)10.1016/j.conbuildmat.2016.03.138 ↗
12. Laboratory investigation of basic oxygen furnace slag for substitution of aggregate in porous asphalt mixture10.1016/j.conbuildmat.2007.11.001 ↗
13. Determination of the expansion force of coarse steel slag aggregate10.1016/j.conbuildmat.2010.04.004 ↗
14. Use of steel slag as a granular material: volume expansion prediction and usability criteria10.1016/j.jhazmat.2010.08.071 ↗
15. Mechanical and hydration characteristics of autoclaved aerated concrete (AAC) containing iron-tailings: effect of content and fineness10.1016/j.conbuildmat.2016.10.031 ↗
16. Materials, production, properties and application of aerated lightweight concrete: review
17. Structure and properties of aerated concrete: a review10.1016/S0958-9465(00)00016-0 ↗
18. In situ time-resolved X-ray diffraction of tobermorite formation in autoclaved aerated concrete: Influence of silica source reactivity and Al addition10.1016/j.cemconres.2011.01.022 ↗
19. Phase relations in the CaO–SiO2–H2O system to 200 °C at saturated steam pressure10.1016/j.cemconres.2003.08.009 ↗
20. Preparation of autoclaved aerated concrete using copper tailings and blast furnace slag10.1016/j.conbuildmat.2011.08.034 ↗
21. Influence of air-cooled slag on physicochemical properties of autoclaved aerated concrete10.1016/j.cemconres.2004.10.011 ↗
22. Utilization of natural zeolite in aerated concrete production10.1016/j.cemconcomp.2009.10.002 ↗
23. Properties of the autoclaved aerated concrete produced from coal bottom ash10.1016/j.jmatprotec.2008.02.044 ↗
24. ASTM, C1693-11 · 2011
25. Recovery of high grade iron compounds from LD slag by enhanced magnetic separation techniques10.1016/j.minpro.2013.11.001 ↗
26. Steel furnace slag aggregate expansion and hardened concrete properties10.1016/j.cemconcomp.2015.04.006 ↗
27. Effect of perlite waste addition on the properties of autoclaved aerated concrete10.1016/j.conbuildmat.2016.05.019 ↗
28. Properties of autoclaved aerated concrete incorporating rice husk ash as partial replacement for fine aggregate10.1016/j.cemconcomp.2014.07.021 ↗
29. Strength and toughness of lightweight foamed concrete with different sand grading10.1007/s12205-014-0097-y ↗
30. High-temperature phase transition and the activity of tobermorite10.1007/s11595-014-0911-x ↗
31. Thermal characterisation of autoclaved cement made with alumina-silica rich industrialwaste10.1007/s10973-005-6674-z ↗
32. FTIR study and cation exchange capacity of Fe3+- and Mg2+-substituted calcium silicate hydrates10.1016/j.jallcom.2008.06.029 ↗
33. Hydrothermal synthesis and characterization of aluminium and sulfate substituted 1.1 nm tobermorites10.1016/j.jallcom.2007.11.130 ↗