journal article·2018-01

Effect of zeolite on waste based alkali-activated inorganic binder efflorescence

JinBang Wang, FangShu Li, ZongHui Zhou, Peng Du, Dongyu Xu, Ning Xie, Xin Cheng, Yu Liu

Publisher page

Abstract

Abstract Alkali-activated inorganic binder has been a research hot spot in the field of building materials owing to its wide range of raw materials, low energy consumption, less pollution and superior performances. The bicarbonate salt weathering is one of prime cause of deterioration of porous materials. To inhibit the efflorescence of waste based alkali-activated inorganic binder, 5A zeolite powder was blended and the efflorescence inhibition mechanism was analyzed. Effect of 5A zeolite content on the mechanical properties, bicarbonate ions concentration, pH value and pore size distribution of the obtained alkali-activated inorganic binder were investigated. The results showed that the compressive strength and bending strength of the waste based alkali-activated inorganic binder are improved with adding moderate content of 5A zeolite powder, and the pH value of specimens decreases with increasing amount of 5A zeolite powder content, the average pore size of samples decreases with adding moderate content of 5A zeolite powder due to its micro-aggregate filling effects. The efflorescence of waste based alkali-activated inorganic binder is effectively reduced with the adding of 5A zeolite powder, and the inhibition mechanisms mainly are that the special ion-exchange properties and micro-aggregate filling effects.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. GEOPOLYMER Inorganic polymeric new materials10.1007/BF01912193 ↗
2. Modification of mechanical and thermal properties of fly ash-based geopolymer by the incorporation of steel slag10.1016/j.matlet.2016.04.121 ↗
3. Properties of waste-based geopolymer building blocks10.4028/www.scientific.net/AMM.357-360.935 ↗
4. Utilisation of steel furnace slag coarse aggregate in a low calcium fly ash geopolymer concrete10.1016/j.cemconres.2016.09.001 ↗
5. Quantification of chloride diffusion in fly ash–slag-based geopolymers by X-ray fluorescence (XRF)10.1016/j.conbuildmat.2014.07.031 ↗
6. Effect of blast furnace slag grades on fly ash based geopolymer waste forms10.1016/j.fuel.2014.05.018 ↗
7. Properties of alkali activated slag–fly ash blends with limestone addition10.1016/j.cemconcomp.2015.01.007 ↗
8. The influence of alpha-Al2O3 addition on microstructure, mechanical and formaldehyde adsorption properties of fly ash-based geopolymer products10.1016/j.jhazmat.2011.07.029 ↗
9. Effect of curing temperature and silicate concentration on fly-ash-based geopolymerization10.1021/ie051251p ↗
10. Microstructure of geopolymer materials based on fly ash
11. Investigation of early compressive strength of fly ash-based geopolymer concrete10.1016/j.conbuildmat.2016.03.008 ↗
12. Mechanical performance and hydration mechanism of geopolymer composite reinforced by resin10.1016/j.msea.2010.06.069 ↗
13. Strength and drying shrinkage of alkali-activated slag paste and mortar10.1155/2012/579732 ↗
14. J. Davidovits, 30 Years of successes and failures in geopolymer applications. Market trends and potential breakthroughs, in: Geopolymer 2002 Conference, 2002, pp. 1–16.
15. Mineral polymer: current developments and prospects
16. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
17. Multi-scale modeling and experimental investigations of geopolymeric gels at elevated temperatures10.1016/j.compstruc.2013.01.005 ↗
18. Preparation and thermal properties of fire resistant metakaolin-based geopolymer-type coatings10.1016/j.jnoncrysol.2010.09.063 ↗
19. Efflorescence control in geopolymer binders based on natural pozzolan10.1016/j.cemconcomp.2011.07.007 ↗
20. Microstructure and properties of fly ash-based geopolymeric material with 5A zeolite as a filler10.1016/j.conbuildmat.2012.01.014 ↗
21. Fly ash-based geopolymers: the relationship between composition, pore structure and efflorescence10.1016/j.cemconres.2014.06.004 ↗
22. Change in pore structure of MFI zeolite by treatment with NaOH aqueous solution10.1016/S1387-1811(00)00349-8 ↗
23. Efflorescence pathway diagram: understanding salt weathering10.1016/j.conbuildmat.2004.02.003 ↗
24. Alkali activated cements opportunities and challenges10.1016/S0008-8846(98)00093-3 ↗
25. The physical and chemical basis of the formation of alkali cementitious materials (I)
26. Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes10.1016/j.jhazmat.2008.12.121 ↗
27. The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation10.1016/j.cemconres.2004.10.042 ↗
28. Role of water in the synthesis of calcined kaolin-based geopolymer10.1016/j.clay.2008.09.003 ↗
29. K and Ca exchange behavior of zeolite A10.1016/j.micromeso.2011.09.025 ↗
30. Determination of the Si/Al and Na/Al ratios of two specimens of zeolite A by proton inelastic scattering10.1016/0144-2449(87)90113-8 ↗