Evaluation of permanent deformation of multilayer porous asphalt courses using an advanced multiply-repeated load test
Source abstract
Abstract
Abstract Multilayer porous asphalt (PA) courses have the advantages of runoff mitigation, rainwater management and noise reduction. The objective of this paper was to develop an advanced multiply-repeated load test which can effectively simulate the field conditions, including confinement condition, actual temperature distribution, and axle load spectrum. And it was used to evaluate the rutting resistance of multilayer PA courses in this study. Rutting resistance of single, double, and triple-layer PA courses and traditional dense graded asphalt courses (control) were investigated under three axle load spectrums. Rutting resistance indicators, such as multiple flow number and loading sensitivity curve, were utilized to evaluate the rutting resistance. The result indicates that the percentage of heavy axle loads in the load spectrum plays a vital role in the rutting development of multilayer PA courses. The rutting resistance of four multilayer asphalt courses was compared and the control was the best, following by the single, double, and triple-layer PA courses. The addition of fiber in porous asphalt mixture can remarkably improve the rutting resistance of multilayer PA courses. Based on the results, it can be concluded that the single-layer PA courses can be used in heavy traffic roads and has been validated by field constructions. The double and triple-layer PA courses are only recommended in medium traffic roads, and the performance in the field need further investigated and validated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Urban Stormwater Management Solutions · Asphalt Pavement Performance Evaluation · Hydraulic flow and structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Quantification of bituminous mortar ageing and its application in ravelling evaluation of porous asphalt wearing courses10.1016/j.matdes.2017.01.052 ↗
2. A.E. Alvarez, et al., Synthsis of current practice on the design, construction and maintance of porous friction course, FHWA/TX-06/0-5262-1, 2006.
3. Performance of porous asphalt mixture with various additives
4. G.G. Van Bochove, Twinlay, a new concept of drainage asphalt concrete, in: Proceeding of 1st Eurobitume and Euroasphalt Congress, Strasbourg, 1996.
5. Huber · 2000
6. Laboratory simulation of the clogging behaviour of single-layer and two-layer porous asphalt10.1080/14680629.2012.749803 ↗
7. Comprehensive study on the porous asphalt effects on expressways in Japan: based on field data analysis in the last decade10.1080/14680629.2013.779298 ↗
8. A review of mix design and evaluation research for permeable friction course mixtures10.1016/j.conbuildmat.2010.09.038 ↗
9. Comparison of permeable friction course mixtures fabricated using asphalt rubber and performance-grade asphalt binders10.1016/j.conbuildmat.2011.08.085 ↗
10. Structural contribution of open-graded friction course mixes in mechanistic-empirical pavement design10.1080/10298436.2013.857776 ↗
11. B.J. Putman, Evaluation of Open-Graded Friction Courses: Construction, Maintenance, and Performance. Report FHWA-SC-12-04, 2012.
12. Comparison of the hydraulic behaviour and the quality of highway runoff water according to the type of pavement10.1016/S0043-1354(00)00221-9 ↗
13. M.W. Witczak, K. Kaloush, T. Pellinen, M. Elbasyouny, H.V. Quintus, Simple Performance Test for Superpave Mix Design, NCHRP Report 465, Washington D.C., 2002.
14. Development of an innovative uniaxial compression test to evaluate permanent deformation of asphalt mixtures10.1061/(ASCE)MT.1943-5533.0001038 ↗
15. Evaluating the rutting resistance of asphalt mixtures using an advanced repeated load permanent deformation test under field conditions10.1016/j.conbuildmat.2014.02.052 ↗
16. Developing an optional multiple repeated load test to evaluate permanent deformation of asphalt mixtures based on axle load spectrum10.1016/j.conbuildmat.2016.05.006 ↗
17. Tertiary flow characteristics of asphalt mixtures
18. Influence of aggregate gradation on the performance properties of porous asphalt mixtures10.1061/(ASCE)MT.1943-5533.0000602 ↗
19. Cause analysis on permanent deformation for asphalt pavements using field cores10.1016/j.conbuildmat.2015.09.012 ↗
20. A new creep test method for asphalt mixtures10.1080/14680629.2010.9690315 ↗
21. Effect of air voids content on thermal properties of asphalt mixtures10.1016/j.conbuildmat.2016.03.106 ↗
22. Thermal properties of asphalt pavements under dry and wet conditions10.1016/j.matdes.2015.11.116 ↗
23. H. Wang, Deflection equivalent conversion of overload axle for asphalt pavement, in: Eighth International Conference of Chinese Logistics and Transportation Professionals, 2008, pp. 2473–2478.10.1061/40996(330)364 ↗
24. Verification and modeling of three-stage permanent deformation behavior of asphalt mixes10.1061/(ASCE)0733-947X(2004)130:4(486) ↗
25. Long-term field performance of porous asphalt pavement in China10.1080/14680629.2014.944205 ↗
26. China Communications Construction Company Highway Consultants CO. L. Specifications for design of highway asphalt pavement, 2006.