journal article·2018-01

Time-varying relative displacement field on the surface of concrete cover caused by reinforcement corrosion based on DIC measurement

Xianyu Jin, Jing Tong, Ye Tian, Nanguo Jin

Publisher page

Abstract

Abstract To investigate the cracking process of concrete cover due to corrosion of reinforcement for concrete specimens subjected to semi-immersed accelerated corrosion, digital image correlation (DIC) was applied to quantitatively and visually characterize the development of relative displacement on the viewed surface. The impacts of stirrups and concrete cover thickness on the evolution of relative displacement were interpreted. And a detailed analysis covered the initial cracking time, position and relative displacement distribution on the surface during the cracking procedure. The study indicates that the corrosion of stirrups is prior to longitudinal reinforcement as the longitudinal reinforcement is cathodic protected by stirrups. The full-scale monitoring on the relative displacement reveals that a thicker concrete cover can retard the initial cracking but will promote the propagation speed of corrosion cracks. The investigation on the initial cracking zone implies that the initial cracking has high probability to appear within a region and its width is approximately close to the concrete cover thickness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Infrastructure Maintenance and Monitoring

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Corrosion products of reinforced bars embedded in concrete10.1016/0010-938X(93)90382-Q ↗
2. Composition and expansion coefficient of rust based on X-ray diffraction and thermal analysis10.1016/j.corsci.2011.01.007 ↗
3. Crack shape and rust distribution in corrosion-induced cracking concrete coupled with load
4. Tests of reinforced concrete beams with corrosion-damaged stirrups
5. Severely corroded reinforced concrete with cover cracking: part 1. Crack initiation and propagation
6. Control of rust damage of reinforced concrete in a corrosive environment
7. Corrosion of steel in concrete in relation to bar diameter and cover thickness
8. Corrosion cracking in relation to bar diameter, cover, and concrete quality10.1061/(ASCE)0899-1561(1992)4:4(327) ↗
9. Factors controlling cracking of concrete affected by reinforcement corrosion10.1007/BF02480466 ↗
10. Cover cracking as a function of bar corrosion: part I-experimental test10.1007/BF02472805 ↗
11. Lateral displacement of RC beams under simultaneous load and steel corrosion10.1016/j.conbuildmat.2009.08.005 ↗
12. Interaction between corrosion crack width and steel loss in RC beams corroded under load10.1016/j.cemconres.2010.03.010 ↗
13. Behaviour of RC beams corroded under sustained service loads10.1016/j.conbuildmat.2009.06.005 ↗
14. Longitudinal strains and stiffness of RC beams under load as measures of corrosion levels10.1016/j.engstruct.2011.11.021 ↗
15. A laser-speckle strain gauge10.1088/0022-3735/14/11/012 ↗
16. Digital imaging techniques in experimental stress analysis10.1117/12.7972925 ↗
17. Measuring three-dimensional damage in concrete under compression
18. Experimental investigations of strain localization in concrete using digital image correlation (DIC) technique
19. Measurement of displacements on concrete subjected to compression using image correlation10.1007/BF02317423 ↗
20. Digital image correlation analysis of crack behavior in a reinforced concrete beam during load test10.1139/l06-106 ↗
21. Digital image correlation analysis of interfacial debonding properties and fracture behavior in concrete10.1016/j.engfracmech.2006.01.035 ↗
22. Full-field strain measurement based on least-square fitting of local displacement for digital image correlation method
23. Analysis of compressive fracture of three different concretes by means of 3D-digital image correlation and vacuum impregnation10.1016/j.cemconcomp.2010.01.003 ↗
24. Measuring microscopic displacements with digital image correlation10.1016/S0143-8166(96)00041-3 ↗