journal article·2018-04

Comparison and relationship between indices for the characterization of the moisture resistance of asphalt–aggregate systems

Quan Lv, Weidong Huang, Naipeng Tang, Feipeng Xiao

Publisher page

Abstract

Abstract The complex and diversified asphalt modification makes it harder for the assessment of testing methods capable of characterizing the performance of different modified asphalt in the presence of water. In this study, three representative test methods addressing the moisture performance of asphalt were evaluated and compared: surface free energy (SFE) test, binder bond strength (BBS) test and Hamburg wheel tracking device (HWTD) test. Results indicate that the HWTD test can be a benchmark test while the BBS test is a screening test in characterizing the moisture performance of various modified asphalt. In addition, the surface energy component obtained from the receding procedure in the Wilhelmy Plate Method correlated better with the adhesion property of asphalt than those based on the advancing procedure did. The various indices obtained from the three tests were classified as suitable or unsuitable indices on the basis of the analysis of specific additives. Furthermore, based on the degree of their improvement in the moisture performance, additives were classified into three grades: (1) the first grade including linear styrene–butadiene–styrene (SBS), branched SBS and gilsonite; (2) the second grade including high-density polyethylene, and polyphosphoric acid; (3) the third grade including asphalt rubber and terminal blend asphalt. Finally, it was found that base binders with shorter-chain structures and lower aromatics contents showed better moisture resistance in the HWTD test. High mobility of base asphalt binder negatively influenced the corresponding mixture’s moisture sensitivity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Integration of moisture sensitivity testing with gyratory mix design and mechanistic-empirical pavement design10.1061/(ASCE)0733-947X(2009)135:11(852) ↗
2. A review on moisture damages of hot and warm mix asphalt and related investigations10.1016/j.jclepro.2015.03.028 ↗
3. Relationship analysis between surface free energy and chemical composition of asphalt binder10.1016/j.conbuildmat.2014.08.024 ↗
4. A study of moisture damage in plastomeric polymer modified asphalt binder using functionalized AFM tips
5. Performance evaluation of Hot Mix Asphalt (HMA) containing bitumen modified with Gilsonite10.1016/j.conbuildmat.2016.11.069 ↗
6. Relating adhesion and cohesion of asphalts to the effect of moisture on laboratory performance of asphalt mixtures10.1177/0361198105190100105 ↗
7. D. Cheng, D.N. Little, R.L. Lytton, et al., Use of surface free energy properties of the asphalt-aggregate system to predict moisture damage potential (with discussion), in: Asphalt Paving Technology: Association of Asphalt Paving Technologists – Proceedings of the Technical Sessions, 2002, p. 71.
8. J. Youtcheff, V. Aurilio, Moisture sensitivity of asphalt binders: evaluation and modeling of the pneumatic adhesion test results, in: Proceedings of the Annual Conference – Canadian Technical Asphalt Association, Polyscience Publications Inc., 1997, pp. 180-200.
9. Evaluation of AASHTO T 324 Hamburg-Wheel Track Device test10.1016/j.conbuildmat.2016.03.171 ↗
10. Fundamental characterization of SBS-modified asphalt mixed with sulfur10.1002/app.24621 ↗
11. Laboratory evaluation of self-healing properties of various modified asphalt10.1016/j.conbuildmat.2017.01.045 ↗
12. Arizona Department of Transportation, Standard Specifications for Road & Bridge Construction, Department of Transportation Engineering Records Section, Phoenix, 2000.
13. Laboratory investigation on fatigue performance of modified asphalt concretes considering healing10.1016/j.conbuildmat.2016.02.083 ↗
14. Infrared microscopy investigation of oxidation and phase evolution in bitumen modified with polymers10.1016/j.fuel.2007.06.029 ↗
15. Bitumen surface energy characterization using a contact angle approach10.1061/(ASCE)0899-1561(2006)18:6(759) ↗
16. AASHTO TP-91, Standard Method of Test for Determining Asphalt Binder Strength by Means of the Binder Bond Strength (BBS) Test, American Association of State Highway and Transportation Officials, Washington, D.C., 2011.
17. Investigation of using binder bond strength test to evaluate adhesion and self-healing properties of modified asphalt binders10.1016/j.conbuildmat.2016.03.047 ↗
18. AASHTO Standard Specifications for Transportation Materials and Methods of Sampling and Testing, Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt (HMA), AASHTO Designation: T324-11, 31st ed., AASHTO, Washington, D.C., 2011.
19. L.F. Walubita, A.N. Faruk, S.I. Lee, et al., HMA Shear Resistance, Permanent Deformation, and Rutting Tests for Texas Mixes: Year 1 Report, Technical Report FHWA/TX-13/0-6744-1, Texas A&M Transportation Institute, College Station, Texas, 2013.
20. Rheological properties and chemical analysis of nanoclay and carbon microfiber modified asphalt with Fourier transform infrared spectroscopy10.1016/j.conbuildmat.2012.08.004 ↗
21. Effect of surface tension on the measurement of surface energy components of asphalt binders using the Wilhelmy plate method10.1016/j.conbuildmat.2015.08.125 ↗
22. Polymer modification of bitumen: advances and challenges10.1016/j.eurpolymj.2014.02.005 ↗
23. W. Huang, L. Zhou, Evaluation of adhesion properties of modified asphalt binders using binder bond strength test, in: Transportation Research Record: Journal of the Transportation Research Board, No. 17-02329, Transportation Research Board of the National Academies, Washington, D.C., 2017.10.3141/2632-10 ↗
24. Current status and development of terminal blend tyre rubber modified asphalt10.1016/j.conbuildmat.2016.10.080 ↗
25. Y.R. Kim, D.N. Little, F.C. Benson, Chemical and mechanical evaluation on healing mechanism of asphalt concrete, in: Asphalt Paving Technology: Association of Asphalt Paving Technologists – Proceedings of the Technical Sessions, vol. 59, 1990, pp. 240–275.
26. Use of molecular dynamics to investigate self-healing mechanisms in asphalt binders10.1061/(ASCE)MT.1943-5533.0000200 ↗
27. Effect of chemical composition and structure of asphalt binders on self-healing10.1016/j.conbuildmat.2016.12.082 ↗