Petrographic characterization of Portlandite crystal sizes in cement pastes affected by different hydration environments
Source abstract
Abstract
Abstract Petrography is a valuable characterization method, which helps understand and determine whether any issue could affect the cement-based materials performance. This optical microscopy technique has multiple applications in the construction industry, such as the characterization of anhydrous or hydrated compounds, material durability and quality control. This paper presents the results of an experimental research program focused on characterizing the effect of humidity and dry conditions during the cement-paste curing, on the size characteristics of Portlandite crystals formed during hydration. Cement-paste thin sections with small variations in the water to cement ratio, divided into two groups, some of them continuously submerged in water while others left in the air under the environmental conditions of the laboratory, were prepared 7 and 28 days after mixing in order to observe them by using the petrographic microscope. From these observations, the variation of the different remnant anhydrous and hydrated minerals for each age and curing condition was evaluated, emphasizing in the characteristics of the Portlandite habits. Additionally, the statistical determination of the Portlandite crystal’s sizes, whose average size for curing at room temperature at 7 was 11 μm and 28 days was 20 μ, while for wet curing at 7 days was 16.5 μm and 29 μm at 28 days. Results showed that for all anhydrous mineral phases, there were no statistical size differences, while the sizes of the crystals of the Portlandite phase showed important variations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Drilling and Well Engineering · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Concrete petrography: a review10.1144/GSL.QJEG.1991.024.01.03 ↗
2. D. Jana, Concrete petrography – past, present, and future, in: 10 Th Euroseminar Microsc. Appl. to Build. Mater., 2005: pp. 1–22.
3. Assessment of the potential alkali-reactivity of aggregates for concrete by image analysis petrography10.1016/j.cemconres.2012.08.009 ↗
4. ASTM C295-03, Standard Guide for Petrographic Examination of Aggregates for Concrete, Annu. B. ASTM Stand., 2003, pp. 1–8. https://doi.org/10.1520/C0295.10.1520/C0295 ↗
5. ASTM C1778-16, Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction, Annu. B. ASTM Stand., 2014, pp. 1–11. https://doi.org/10.1520/C1778-14.2.
6. Application of petrography for determining the quality of concrete cured in tropical environment10.1016/j.cemconres.2004.07.034 ↗
7. Petrography evidence of the interfacial transition zone (ITZ) in the normal strength concrete containing granitic and limestone aggregates10.1016/j.conbuildmat.2010.11.023 ↗
8. A thermoanalytical, X-ray diffraction and petrographic approach to the forensic assessment of fire affected concrete in the United Arab Emirates10.1016/j.forsciint.2016.03.015 ↗
9. J.P. Ingham, Assessment of Fire-Damaged Concrete and Masonry Structures : the Application of Petrography, 2007.
10. Lea’s Chemistry of Cement and Concrete
11. The effect of water ratio on microstructure and composition of the hydration products of Portland cement pastes
12. Effect of curing compounds on the properties and microstructure of cement concretes10.1016/j.conbuildmat.2015.10.124 ↗
13. ASTM C150, Standard Specification for Portland Cement, Annu. B. ASTM Stand., 2007, pp. 1–8. https://doi.org/10.1520/C0150.10.1520/C0150 ↗
14. ASTM C188, Standard Test Method for Density of Hydraulic Cement 1, 2016, pp. 15–17. https://doi.org/10.1520/C0188-15.2.
15. ASTM C204, Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability, ASTM Int. West Conshohocken, PA, 2011, pp. 1–10. https://doi.org/10.1520/C0204-11.2.
16. ASTM C187, Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste 1, i 2016, pp. 1–3. https://doi.org/10.1520/C0187-16.2.
17. ASTM C109, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [ 50-mm ] Cube Specimens) 1, Chem. Anal., 2010, pp. 1–9. https://doi.org/10.1520/C0109.
18. NT Build 361. Concrete, hardened: water-cement ratio. Nordtest Method, pp. 1459–2762
19. D.H. Campbell, Microscopical Examination and Interpretation of Portland Cement and Clinker, Portland Cement Association, 1999.
20. Effect of moisture content on compressive and split tensile strength of concrete
21. Concrete petrography
22. Evaluation of the hydration of Portland cement containing various carbonates by means of thermal analysis
23. Absorption characteristics of concrete as a function of location relative to casting position10.1016/0008-8846(95)00095-T ↗
24. Combined effects of mineral admixtures and curing conditions on the sorptivity coefficient of concrete10.1016/S0008-8846(03)00112-1 ↗
25. The effect of improper curing on properties that may affect concrete durability10.1680/jmacr.17.00148 ↗
26. Influence of water-to-cement ratio and curing period on pore structure of cement mortar10.1016/j.conbuildmat.2012.09.058 ↗