journal article·2018-09

Utilizing industrial waste-water as alkali activator in sand-cement kiln dust bricks

Sabry A. Ahmed, Mostafa-Elnabawy A. Metwally, Sahar E. Zakey

Publisher page

Abstract

Abstract Recycling of wastes as building materials appears to be viable solution; not only to overcome pollution problems but also for economical purposes. In this study the cement kiln dust (CKD) produced during the production of ordinary Portland cement was used to produce sand-CKD bricks at 25, 30 and 35% CKD of the dry weight. Also, two types of industrial alkaline waste-water of textile and aluminum pots factories with 850, 8000, 12,500 and 52,000 ppm were used as mixing water, beside the use of tap water in the reference mix. After complete drying, the samples were subjected to heat curing at different temperatures of 120, 150 and 200 °C for different times of 3, 6, 12 and 24 h. The sand-CKD bricks made with 30% CKD, 12,500–52,000 ppm alkaline waste-water and heat cured at 120 °C for 3 h had compressive strength of 12.5 MPa, unit weight of 1.66 ton/m3 and water absorption of 10%. Increasing the heating temperature to 200 °C for 12 h raised the compressive strength and water absorption to 16.5 MPa and 13.7%, respectively, while decreased the unit weight to 1.46 ton/m3.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Building materials and conservation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Utilization of cement kiln dust in mortar and concrete mixes and in production of concrete blocks
2. The potential use of cement–asbestos waste in the ceramic masses destined for sintered wall clay brick manufacture10.1016/j.ceramint.2014.04.037 ↗
3. Incorporation of water sludge, silica Fume and rice husk ash in brick making
4. A study on the reuse of cement kiln dust in the production of cement concrete
5. Mechanism and chemical reaction of fly ash geopolymer cement: a review
6. Alkali activated binders: a review part 1 historical background, terminology, reaction mechanisms and hydration products10.1016/j.conbuildmat.2007.10.015 ↗
7. Alkali activated binders: a review part 2 about materials and binders manufacture10.1016/j.conbuildmat.2007.03.019 ↗
8. Utilization of cement kiln dust to enhance mine tailings-based geopolymer bricks10.1016/j.conbuildmat.2012.11.069 ↗
9. Investigation on the effect of cement kiln dust and glauconite on the properties of acid resisting brick
10. Attia · 2011
11. BS EN 772-1 (2011), Methods of test for masonry units, Part 1: Determination of compressive strength, BSI standers publication.
12. BS EN 772-13 (2000), Methods of test for masonry units, Part 13: Determination of net and gross dry density of masonry units (except for natural stones), BSI standers publication.
13. BS EN 772-21 (2011), Methods of test for masonry units, Part 21: Determination of water absorption of clay and calcium silicate masonry units by cold water absorption, BSI standers publication.