Tensile constitutive behavior of high and ultra-high performance fibre-reinforced-concretes
Source abstract
Abstract
Abstract High Performance Fibre-Reinforced-Cement-Composites and Ultra-High Performance Fibre-Reinforced-Concretes, also named HPFRCCs and UHPFRCs respectively, are today widely used as repair and strengthening existing structures, such as bridge decks, pavements, piers etc. Simple test methods to characterize its mechanical behavior are requested, in order to ensure that the product meets the designer’s requirements, especially in term of tensile behavior. Various test methods are available, even though a proper correlation between direct and indirect tensile (e.g. flexural) tests is needed. In this paper a model based on the “Composite Material Theory” (CMT) was developed to predict the flexural behavior of three commercialized SFRCs once the direct tensile strength is measured. A good agreement was found between experimental results and the values predicted by the model.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. T.M. Ahlborn, E.J. Puese, D.L. Misson, Ultra-high performance concrete for Michigan bridges, Material Performance-Phase I, 2008, 190.
2. Concrete bridge deck slabs strengthened with UHPFRC10.2749/222137813806735615 ↗
3. Single-lap shear bond tests on Steel Reinforced Geopolymeric Matrix-concrete joints10.1016/j.compositesb.2016.11.005 ↗
4. Punching shear behavior of lightweight fiber reinforced concrete slabs10.1016/j.compositesb.2016.06.045 ↗
5. Splitting and crushing failure in FRC elements subjected to a high concentrated load10.1016/j.compositesb.2016.08.032 ↗
6. Bond and cracking behavior of lap-spliced reinforcing bars embedded in hybrid fiber reinforced strain-hardening cementitious composite (SHCC)10.1016/j.compositesb.2016.09.086 ↗
7. Homogeneous structures subjected to successive structural system changes10.1061/(ASCE)0733-9399(1990)116:8(1723) ↗
8. Time dependent analysis of concrete structures with variable structural system
9. Viscoelastic heterogeneous structures with variable structural system10.1061/(ASCE)0733-9399(1993)119:2(238) ↗
10. S. Finazzi, I. Paegle, G. Fischer, F. Minelli, Influence of bending test configuration on cracking behavior of FRC, in: Proceedings of the 3rd All-Russia (International) Conference on Concrete and Reinforced Concrete, 3, 2014, pp. 196–205.
11. Experimental behavior of SFRC columns under uniaxial and biaxial cyclic loads10.1016/j.compositesb.2015.09.010 ↗
12. Strain hardening ultra-high performance fiber reinforced cementitious composites: effect offiber type and concentration10.1016/j.compositesb.2016.08.004 ↗
13. Experiment study on the frost resistance of steel fiber reinforced concrete10.4028/www.scientific.net/AMR.150-151.243 ↗
14. Design, construction and monitoring of four innovative concrete bridge decks using non-corrosive FRP composite bars
15. Performance evaluation of a polypropylene-based draw-wired fibre for concrete structures10.1016/j.conbuildmat.2011.10.017 ↗
16. Damaged hyperelastic membranes10.1016/j.ijnonlinmec.2013.12.001 ↗
17. Equilibrium configurations and stability of a damaged body under uniaxial tractions10.1007/s00033-014-0397-6 ↗
18. Concrete beams stiffened by polymer-based mortar layers: experimental investigation and modeling10.1016/j.conbuildmat.2015.12.065 ↗
19. A simple nonlinear model to simulate the localized necking and neck propagation10.1016/j.ijnonlinmec.2016.04.008 ↗
20. Possibility to improve strength and structural stability of bridge deck slabs by using ultra high performance fiber reinforced concrete10.9790/1684-11327987 ↗
21. Experimental investigation and monitoring of a polypropylene-based fiber reinforced concrete road pavement10.1016/j.conbuildmat.2013.05.077 ↗
22. Dispersion of the mechanical properties of FRC investigated by different bending tests
23. Achieving mixtures of ultra-high performance concrete
24. High-strength flowable mortar reinforced by steel fiber10.2478/v10189-011-0013-0 ↗
25. Characterization of hardened state behavior of self compacting fiber reinforced cementitious composites (SC-FRCC’s) with different beam sizes and fiber types10.1016/j.compositesb.2016.06.075 ↗
26. Scott · First International Interactive Symposium on UHPC · 2016 · 2016 · 1
27. Influence of concrete strength and steelfibre geometry on the fibre/matrix interface10.1016/j.compositesb.2017.04.010 ↗
28. Predicting the shear strength of steel fiber reinforced concrete beams10.1016/j.conbuildmat.2011.06.042 ↗
29. Nonlinear fracture mechanics for an elastic Bell material10.1093/qjmam/50.3.435 ↗
30. Homogeneous equilibrium configurations of a hyperelastic compressible cube under equitriaxial dead-load tractions10.1007/s10659-008-9160-6 ↗
31. Effect of aspect ratio and volume fraction of steel fiber on the mechanical properties of SFRC10.1016/j.conbuildmat.2006.05.025 ↗
32. Predicting service deflection of ultra-high-performance fiber reinforced concrete beams reinforced with GFRP bars10.1016/j.compositesb.2016.06.013 ↗
33. CNR-DT 204, Guidelines for design, construction and production control of fiber reinforced concrete structures, National Research Council of Italy, 2006.
34. Fib Model Code for Concrete Structures 2010, Fib Model Code for Concrete Structures, 2010.
35. Symposium SI, Tecnology C, February S. Chemical admixtures today, Mario Collepardi, Enco, Engineering Concrete, Ponzano Veneto (Italy), 2005, 527–541.
36. UNI EN 12390-2, Testing hardened concrete – Making and curing specimens for strength tests, 2003.
37. UNI EN 12390-3, Testing hardened concrete – Compressive strength of test specimens, 2003.
38. UNI 11039-2, Steel fibre reinforced concrete – Test method for determination of first crack strength and ductility indexes, 2003.
39. UNI 11188, Steel fibres reinforced concrete structural elements – Design, execution and control, 2007.
40. PrSIA 2052, Béton fibré ultra-performant (BFUP)-Matériaux, dimensionnement et exécution, 2015–05.
41. EN 1992-1-1, Design of concrete structures – General rules and rules for buildings, 1992.
42. Study on the strength and durability characteristics of high strength concrete with steel fibers
43. Simple and effective models to predict the compressive and tensile strength of HPFRC as the steel fiber content and type change10.1016/j.compositesb.2017.11.003 ↗
44. Size effect on compressive strength of reactive powder concrete10.1016/S1006-1266(08)60059-0 ↗
45. Size effect on flexural behavior of ultra-high-performance hybrid fiber-reinforced concrete10.1016/j.compositesb.2012.07.012 ↗
46. Size effect in ultra-high-performance concrete beams10.1016/j.engfracmech.2016.02.009 ↗
47. Evaluation of damage in brazilian test using holographic interferometry
48. Experimental and numerical analysis of high strain rate splitting tensile tests
49. JCI-S-003-2007, Method of test for bending moment – curvature of FRCC, Japan Concrete Institute Standard, 2007.
50. ASTM C1609/C1609M-12, Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading), 2012.
51. EN 14651, Test method for metallic fibered concrete – Measuring the flexural tensile strength (limit of proportionality (LOP), residual), 2007.
52. RILEM TC 162-TDF, Vandewalle, L. et.al. Test and design methods for steel fibre reinforced concrete – Bending test. Materials and Structures, RILEM Publications, 35, 2002, pp.579-582.10.1617/13884 ↗
53. Pullout behavior of high-strength steel fibers embedded in ultra-high-performance concrete
54. Effect of fiber content on mechanical and fracture properties of ultra high performance fiber reinforced cementitious composites10.1016/j.compstruct.2013.07.033 ↗
55. Tensile fracture properties of an ultra high performance fiber reinforced concrete (UHPFRC) with steel fiber10.1016/j.compstruct.2009.06.012 ↗
56. Effect of fiber length and placement method on flexural behavior, tension-softening curve, and fiber distribution characteristics of UHPFRC10.1016/j.conbuildmat.2014.04.007 ↗