Effects of plasma-treated rock asphalt on the mechanical properties and microstructure of oil-well cement
Source abstract
Abstract
Abstract In this study, natural rock asphalt with a high softening point was selected as an oil-well cement admixture. The effects of the asphalt, which was subjected to a low-temperature plasma treatment, on the mechanical properties and microstructure of the cement paste were investigated. The results show that the hydrophilicity of the surface of the rock asphalt, and the interfacial bonding between the asphalt and cement matrix were improved with the use of the low-temperature plasma technology. The addition of the treated rock asphalt reduced the compressive strength of the cement paste but improved its tensile strength. Triaxial stress-strain curves, obtained under static and multicycle loads, showed that the rock asphalt improved the toughness of the oil-well cement paste. The addition of the 3% rock asphalt obviously enhanced the mechanical deformability of the cement paste. The results of the scanning electron microscopy analysis showed that the rock asphalt can deflect cracks and prevent crack propagation. The ability to restrain crack propagation improved as the adhesion between the treated hydrophilic asphalt and matrix cement improved. The results of the nitrogen-adsorption tests and mercury-intrusion porosimetry tests showed that the incorporation of the rock asphalt reduced the number of harmful pores present within the cement composite. The results of the X-ray diffraction (XRD) and thermogravimetric (TG) analyses performed on the asphalt-cement composites showed that the asphalt slightly retards cement hydration.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Cement sheath failure mechanisms: numerical estimates to design for long-term well integrity10.1016/j.petrol.2016.08.032 ↗
2. Hybrid effect of calcium carbonate whisker and carbon fiber on the mechanical properties and microstructure of oil well cement10.1016/j.conbuildmat.2015.05.056 ↗
3. Mechanical properties and microstructure of oil well cement stone enhanced with Tetra-needle like ZnO whiskers10.1016/j.conbuildmat.2016.12.051 ↗
4. Cement sheath modification using nanomaterials for long-term zonal isolation of oil wells: Review10.1016/j.petrol.2017.06.047 ↗
5. Study of the failure mechanisms of a cement sheath based on an equivalent physical experiment10.1016/j.jngse.2016.03.037 ↗
6. Effect of mass ratio of asphalt to cement on the properties of cement modified asphalt emulsion mortar10.1016/j.conbuildmat.2016.12.137 ↗
7. Estimation of elastic modulus of cement asphalt binder with high content of asphalt10.1016/j.conbuildmat.2016.12.003 ↗
8. Laboratory investigation of Portland cement concrete containing recycled asphalt pavements10.1016/j.cemconres.2005.05.002 ↗
9. Laboratory investigation into mechanical properties of cement emulsified asphalt mortar10.1016/j.conbuildmat.2014.04.113 ↗
10. The influence of sulfonated asphalt on the mechanical properties and microstructure of oil well cement paste10.1016/j.conbuildmat.2016.12.014 ↗
11. Performance evaluation of petroleum bitumen binders and mixtures modified by natural rock asphalt from Xinjiang China10.1016/j.conbuildmat.2017.07.182 ↗
12. Rheological and low temperature properties of asphalt composites containing rock asphalts10.1016/j.conbuildmat.2015.07.150 ↗
13. Rock asphalt modified asphalt application technology and benefit analysis
14. Improvement of the properties of plasma-modified ground tire rubber-filled cement paste10.1002/app.36907 ↗
15. Time effectiveness of the low-temperature plasma surface modification of ground tire rubber powder10.1080/01694243.2015.1026958 ↗
16. Crumb waste tire rubber surface modification by plasma polymerization of ethanol and its application on oil-well cement10.1016/j.apsusc.2017.03.072 ↗
17. Aging behavior of oxygen plasma-treated polypropylene with different crystallinities10.1163/1568561041588200 ↗
18. Investigating the effect of power/time in the wettability of Ar and O gas plasma-treated low-density polyethylene10.1016/j.porgcoat.2008.08.011 ↗
19. Wettability, ageing and recovery process of plasma-treated polyamide 610.1163/1568561041257487 ↗
20. Dynamic contact angles and morphology of PP fibres treated with plasma10.1016/j.polymertesting.2005.09.017 ↗
21. Ageing effect in atmospheric plasma activation of paper substrates10.1016/j.surfcoat.2008.01.035 ↗
22. Surface modification of a polyurethane film by low pressure glow discharge oxygen plasma treatment10.1002/app.26250 ↗
23. American Petroleum Institute. Recommended Practice for Testing Well Cements. API Recommended Practice 10B-2. Second edition, 2013.
24. General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China, Ministry of Housing and Urban-Rural Development of the People’s Republic of China.GB/T 50266-2013 Standard of engineering rock mass test method. Beijing: China Planning Press, 2013.
25. Poly (sodium vinyl sulfonate)/chitosan membranes with sulfonate ionic cross-linking and free sulfate groups: preparation and application in alcohol dehydration10.1016/j.memsci.2016.02.060 ↗
26. Effects of alkali-treated bamboo fibers on the morphology and mechanical properties of oil well cement10.1016/j.conbuildmat.2017.05.215 ↗
27. Modeling compressive strength of cement asphalt composite based on pore size distribution10.1016/j.conbuildmat.2017.06.049 ↗