A viscosity prediction model for cement paste with nano-SiO2 particles
Source abstract
Abstract
Abstract The workability of cement paste with nano-SiO2 (NS) particles depends on NS dosage and water to cement ratio (W/C). To characterize the workability of cement paste with hydrophilic NS particles, the viscosity of cement paste with different NS dosages and W/C is studied. An original viscosity prediction model is proposed to predict the minimum apparent viscosity of cement pastes with different NS dosages and W/C. In this viscosity prediction model, cement paste with NS can be taken as a suspension, i.e. cement particles is suspended in NS suspension. Therefore, the viscosity of cement paste with NS is composed of the viscosity of NS suspension and the relative viscosity of pure cement paste. The viscosity prediction models for NS suspension and pure cement paste are built up, respectively. The limitation of the viscosity prediction model of cement paste with NS is also discussed. Results show the proposed viscosity prediction model has high accuracy in predicting the viscosity of cement pastes with hydrophilic NS when NS volume fraction in NS suspension is less than 5.5%. The adsorbed water layer thickness of NS particles can be also calculated by the proposed model, and it is well in agreement with the mixing state results of NS suspension.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Nano-core effect in nano-engineered cement-based materials10.1016/j.compositesa.2017.01.008 ↗
2. Properties of high-volume fly ash concrete incorporating nano-SiO210.1016/j.cemconres.2003.11.013 ↗
3. Preliminary study on the water permeability and microstructure of concrete incorporating nano-SiO210.1016/j.cemconres.2005.07.004 ↗
4. Review of nanocarbon-engineered multifunctional cementitious composites10.1016/j.compositesa.2014.12.002 ↗
5. Influence of nanolimestone on the hydration, mechanical strength, and autogenous shrinkage of ultrahigh-performance concrete10.1061/(ASCE)MT.1943-5533.0001327 ↗
6. Influence of nano-SiO2 on the Portland cement pastes10.1016/j.compositesb.2011.12.015 ↗
7. Properties of concrete incorporating nano-silica10.1016/j.conbuildmat.2012.06.044 ↗
8. Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume10.1016/j.conbuildmat.2005.09.001 ↗
9. The effect of nanosilica addition on flowability, strength and transport properties of ultra high performance concrete10.1016/j.matdes.2014.02.051 ↗
10. Effects of nanosilica addition on workability and compressive strength of Portland cement pastes10.1016/j.conbuildmat.2012.04.132 ↗
11. Fracture properties of steel fibre reinforced high-performance concrete containing nano-SiO2 and fly ash
12. The effects of SiO2 nanoparticles on physical and mechanical properties of high strength compacting concrete10.1016/j.compositesb.2010.09.025 ↗
13. Beneficial role of nanosilica in cement based materials – a review10.1016/j.conbuildmat.2013.05.052 ↗
14. Effect of nano-SiO2, nano-Al2O3 and nano-Fe2O3 powders on compressive strengths and capillary water absorption of cement mortar containing fly ash: a comparative study10.1016/j.enbuild.2012.12.014 ↗
15. Investigating the effects of using different types of SiO2 nanoparticles on the mechanical properties of binary blended concrete10.1016/j.compositesb.2013.04.035 ↗
16. Effect of nano-silica on the hydration and microstructure development of ultra-high performance concrete (UHPC) with a low binder amount10.1016/j.conbuildmat.2014.04.063 ↗
17. Effects of nano-silica and nano-limestone on flowability and mechanical properties of ultra-high-performance concrete matrix10.1016/j.conbuildmat.2015.05.137 ↗
18. Characterization of nano-silica prepared from local silica sand and its application in cement mortar using optimization technique10.1016/j.apt.2015.05.008 ↗
19. Nano-modification to improve the ductility of cementitious composites10.1016/j.cemconres.2015.05.026 ↗
20. Durability performances of concrete with nano-silica10.1016/j.conbuildmat.2014.10.014 ↗
21. Mechanical, rheological, durability and microstructural properties of high performance self-compacting concrete containing SiO2 micro and nanoparticles10.1016/j.matdes.2011.08.037 ↗
22. The effects of nano-silica and nano-alumina on frost resistance of normal concrete10.1016/j.conbuildmat.2013.07.088 ↗
23. Reduction of the calcium leaching rate of cement paste by addition of silica nanoparticles10.1016/j.cemconres.2008.03.021 ↗
24. Influence of nano-silica agglomeration on microstructure and properties of the hardened cement-based materials10.1016/j.conbuildmat.2012.08.006 ↗
25. Influence of nano-silica addition in the durability of UHPC10.1016/j.conbuildmat.2015.07.009 ↗
26. Critical review on eco-efficient ultra high performance concrete enhanced with nano-materials10.1016/j.conbuildmat.2015.10.066 ↗
27. Chloride penetration and electrical resistivity of concretes containing nanosilica hydrosols with different specific surface areas10.1016/j.cemconcomp.2014.06.006 ↗
28. Influence of nano-silica agglomeration on fresh properties of cement pastes10.1016/j.conbuildmat.2013.02.066 ↗
29. Water demand of amorphous nano silica and its impact on the workability of cement paste10.1016/j.cemconres.2011.10.008 ↗
30. Effect of nano-silica on rheology and fresh properties of cement pastes and mortars10.1016/j.conbuildmat.2009.02.005 ↗
31. Effect of nano-SiO2 and nano-TiO2 addition on the rheological behavior and the hardened properties of cement mortar10.1016/j.msea.2011.10.102 ↗
32. Development of high-performance self-compacting concrete applied as the filling layer of high-speed railway10.1061/(ASCE)MT.1943-5533.0002129 ↗
33. Simulation of the flow of fresh cement suspensions by a Lagrangian finite element approach10.1016/j.jnnfm.2010.08.003 ↗
34. On the identification of rheological prperties of cement suspensions: rheometry, computational fluid dynamics modeling and field test measurements10.1016/j.cemconres.2012.05.007 ↗
35. The role and interaction of superplasticizer and emulsifier in fresh cement asphalt emulsion paste through rheology study10.1016/j.conbuildmat.2016.08.085 ↗
36. Zhang · 2015
37. Einstein · 1956
38. The viscosity of concentrated suspensions and solutions10.1063/1.1700493 ↗
39. The effect of Brownian motion on the bulk stress in a suspension of spherical particles10.1017/S0022112077001062 ↗
40. A mechanism for non-Newtonian flow in suspensions of rigid spheres
41. Particle packing and rheological property of highly-concentrated ceramic suspensions: ϕm determination and viscosity prediction10.1023/A:1004885432221 ↗
42. Influence of clays on the rheology of cement pastes10.1016/j.cemconres.2009.11.001 ↗
43. Rheology of fresh cement asphalt emulsion pastes10.1016/j.conbuildmat.2015.01.078 ↗
44. Viscosity prediction of fresh cement asphalt emulsion pastes10.1617/s11527-016-0897-2 ↗
45. The pozzolanic reactivity of monodispersed nanosilica hydrosols and their influence on the hydration characteristics of Portland cement10.1016/j.cemconres.2012.09.004 ↗
46. Influence of colloidal silica sol on fresh properties of cement paste as compared to nano-silica powder with agglomerates in micron-scale10.1016/j.cemconcomp.2015.08.002 ↗