An innovative asphalt patch repair pre–heating method using dynamic heating
Source abstract
Abstract
In hot mix asphalt patch repair, inadequate temperature at the interfaces is one of the influencing factors for inferior compaction and poor interface bonding. To enhance repair performance, a precisely controlled infrared pre-heating method for patch repair has been investigated. Asphalt slabs with 45 mm, 75 mm and 100 mm deep pothole excavations were subjected to dynamic heating with infrared heater operating power from 6.6 kW to 7.7 kW. The heater was kept either stationary or moving slowly across the excavations at 130 mm and 230 mm offsets. The tests included evaluating temperature increase throughout the excavations and inside the slab, recording heat power of infrared heater and heating time to avoid burning the asphalt. Irrespective of excavation depth, heating power and offset, the temperature distribution was found non-uniform in the pothole excavations and into the asphalt slab. The temperatures were higher at the faces of the excavation than inside the slab. Dynamic heating for approximately 10 min yielded better heat distribution while minimising the possibility of asphalt overheating and long pre-heating time. It has been concluded that 45 mm and 100 mm deep pothole excavations can be pre-heated with 6.6 kW and stationary heater or 7.5 kW and moving heater at 230 mm and 130 mm offset respectively. 75 mm deep excavation can be pre-heated with 7.1 kW and stationary heater at 230 mm offset.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Thermography and Photoacoustic Techniques · Asphalt Pavement Performance Evaluation · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Dawson · 2008
2. McDaniel · 2014
3. J.R. Blaha, Fabrication and Testing of Automated Pothole Patching Machine (No. SHRP-H-674), Washington, D.C. Strategic Highway Research Program, National Research Council, 1993.
4. D.A. Anderson, H.R. Thomas, Pothole Repair in Pennsylvania. https://docs.lib.purdue.edu/cgi/viewcontent.cgi?referer=&httpsredir=1&article=3367&context=roadschool&sei-redir=1&referer=http%3A%2F%2Fcn.bing.com%2Fsearch%3Fq%3DPothole%2BRepair%2Bin%2BPennsylvania&go%3D%25E6%258F%2590%25E4%25BA%25A4&qs%3Dn&form%3DQBLH&pq%3Dupper%2Bgreat%2B, 1984 (accessed 20 June 2018).
5. T.R. Clyne, E.N. Johnson, B.J. Worel, Use of taconite aggregates in pavement applications (No. MN/RC-2010-24), Minnesota Department of Transportation, Saint Paul, MN, USA, 2010.
6. L. Uzarowski, V. Henderson, M. Henderson, B. Kiesswetter, Innovative Infrared Crack Repair Method, in: Proceedings of Congress et Exhibition de l’Association des Transports du Canada, 2011 Les Succes en Transports: Une Tremplin vers l’Avenir, Edmonton, Canada, 2011.
7. Freeman · 2012
8. C.W. Leininger, Optimization of the infrared asphalt repair process, Master’s Thesis, University of Maryland. https://search.proquest.com/openview/5d63e8ff20aa8561ec9f4e81b6fc75fe/1?pq-origsite=gscholar&cbl=18750&diss=y, 2015 (accessed 20 June 2018).
9. A fast pothole repair method using asphalt tiles and induction heating10.1016/j.conbuildmat.2016.11.099 ↗
10. Modest · 2013
11. Bergman · 2011
12. Andersland · 2004
13. Thermal properties of asphalt concrete: a numerical and experimental study10.1016/j.conbuildmat.2017.10.068 ↗
14. Effect of air voids content on thermal properties of asphalt mixtures10.1016/j.conbuildmat.2016.03.106 ↗
15. B.A. Chadbourn, J.A. Luoma, D.E. Newcomb, V.R. Voller, Consideration of hot mix asphalt thermal properties during compaction, in: Anonymous Quality management of hot mix asphalt, ASTM International, 1996.10.1520/STP16312S ↗
16. BS EN 13108 Part 1, Bituminous mixtures – Material specifications, British Standard Institute (BSI), 2016.
17. Manual of contract documents for Highway works, Volume 1, Specification for highway works, Series 900 Road pavements - Bituminous bound materials, 2008.
18. BS EN 12697 Part 35, Bituminous mixtures - Test methods, Laboratory mixing, British Standard Institute (BSI), 2016.
19. Distress identification manual for the long-term pavement performance program (No. FHWA-HRT-13-092)
20. Department of Transportation, Standard Code of Practice, New Roads and Street Works Act 1991, Specification for the Reinstatement of Openings in Highways, third ed. (England), Department of Transportation, 2010.
21. Omega, Hermetically Sealed Thermocouple. http://www.omega.co.uk/pptst/HSTC.html, 2016 (accessed: 14 May 2016).
22. J. Byzyka, D.A. Chamberlain, M. Rahman, Development of advanced temperature distribution model in hot-mix asphalt patch repair, in: Proceedings of the Institution of Civil Engineers – Transport. (2017) 1–11. https://doi.org/10.1680/jtran.17.00022.10.1680/jtran.17.00022 ↗
23. M.D. Nazzal, S. Kim, A.R. Abbas, Evaluation of winter pothole patching methods, Columbus: FHWA, Ohio Department of Transportation, Publication FHWA/OH-2014/2, 2014.
24. Heating effects of asphalt pavement during hot in-place recycling using DEM10.1016/j.conbuildmat.2016.04.033 ↗
25. Oxidation pathways for asphalt
26. Thermtest, Thermtest TLS-100, Portable transient line source, thermal conductivity meter for soil thermal conductivity testing as well as rock, concrete, and polymers. https://thermtest.com/tls-100, 2018 (accessed: 5 July 2018).
27. Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
28. Thermal conductivity characterization of three geological formations by the implementation of geophysical methods10.1016/j.geothermics.2017.11.003 ↗
29. Experimental study on the thermal conductivity of aeolian sand from the Tibetan Plateau10.1016/j.coldregions.2017.11.006 ↗
30. Overlockers, Alumina thermal paste (14g). https://www.overclockers.co.uk/arctic-silver-alumina-thermal-paste-14g-th-006-ac.html, 2018 (accessed 5 July 2018).
31. T166, Bulk specific gravity of compacted asphalt mixtures using saturated surface - dry specimens
32. Roberts · 1991
33. Self-healing of asphalt mixture by microwave and induction heating10.1016/j.matdes.2016.05.095 ↗
34. L. Eppelbaum, I. Kutasov, A. Pilchin, Methods of Thermal Field Measurements. In: Applied Geothermics, Lecture Notes in Earth System Sciences, Springer, Berlin, Heidelberg, 2014, pp. 151–159. https://doi.org/10.1007/978-3-642-34023-9_3.10.1007/978-3-642-34023-9_3 ↗
35. Effect of freezing-thawing and ageing on thermal characteristics and mechanical properties of conductive asphalt concrete10.1016/j.conbuildmat.2017.02.135 ↗
36. Influence of graphite on the thermal characteristics and anti-ageing properties of asphalt binder10.1016/j.conbuildmat.2014.06.069 ↗
37. Using reflective pavements to mitigate urban heat island in warm climates-results from a large scale urban mitigation project10.1016/j.uclim.2017.02.002 ↗
38. Optical reflectance and transmission of a textured surface10.1016/0040-6090(77)90197-3 ↗