The inhibition behavior of a water-soluble silane for reinforcing steel in 3.5% NaCl saturated Ca(OH)2 solution
Source abstract
Abstract
Abstract The inhibition performance of a water-soluble silane on reinforcing steel in saturated Ca(OH)2 solution contaminated by Cl− was investigated and compared with commonly organic inhibitor N,N-dimethylethanolamine (DMEA) using electrochemical techniques and surface analysis measurements. The results indicate that the lower concentration of APTS has better inhibition efficiency than DMEA, the largest inhibition efficiency are 70.1% and 97.4% for DMEA and APTS after 72 h immersion. DMEA promotes the interfacial layer by formation of CaCO3 deposited on steel surface, while APTS changes the character of steel surface by adsorption and effectively inhibits the pitting corrosion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Corrosion inhibitors for steel in concrete: state-of-the-art report10.1016/j.conbuildmat.2006.10.013 ↗
2. Critical chloride content in reinforced concrete — a review10.1016/j.cemconres.2009.08.006 ↗
3. Predicting Long-term durability of steel reinforced concrete with calcium nitrite corrosion inhibitor
4. Effect of calcium nitrite-based corrosion inhibitor in preventing corrosion of embedded steel in concrete10.1016/j.cemconres.2005.09.003 ↗
5. An electrochemical and analytical approach to the inhibition mechanism of an amino-alcohol-based corrosion inhibitor for reinforced concrete10.1016/S0013-4686(03)00472-9 ↗
6. Phosphate ions as effective inhibitors for carbon steel in carbonated solutions contaminated with chloride ions10.1016/j.electacta.2015.10.167 ↗
7. Corrosion resistance of carbon steel in simulated concrete pore solution in presence of 1-dihydroxyethylamino-3-dipropylamino- 2-propanol as corrosion inhibitor10.1179/1743278213Y.0000000109 ↗
8. Effect of phosphate based inhibitor on the threshold chloride to initiate steel corrosion in saturated hydroxide solution10.1016/j.conbuildmat.2013.08.054 ↗
9. Investigation on the inhibition behavior of a pentaerythritol glycoside for carbon steel in 3.5% NaCl saturated Ca(OH)2 solution10.1016/j.corsci.2011.09.018 ↗
10. Electrochemical behaviour of amino alcohol-based inhibitors used to control corrosion of reinforcing steel10.1016/j.electacta.2004.01.041 ↗
11. The adsorption and inhibition behavior of two organic inhibitors for carbon steel in simulated concrete pore solution10.1016/j.corsci.2017.01.008 ↗
12. Evaluation of corrosion resistance properties of N, N′-Dimethyl ethanolamine corrosion inhibitor in saturated Ca(OH)2 solution with different concentrations of chloride ions by electrochemical experiments10.1016/j.conbuildmat.2016.03.174 ↗
13. Corrosion behavior of carbon steel in chloride contaminated simulated concrete pore solution with carboxylate of benzoic acid and dimethylethanolamine10.1108/ACMM-03-2016-1654 ↗
14. The corrosion inhibition effect of phytic acid on 20SiMn steel in simulated carbonated concrete pore solution10.1016/j.corsci.2015.08.020 ↗
15. Investigation of C-Glycosidic Ketone as a Corrosion Inhibitor for Carbon Steel in 3.5% NaCl Saturated Ca(OH)2 Solution10.20964/2016.10.15 ↗
16. The use of pre-treatments based on doped silane solutions for improved corrosion resistance of galvanised steel substrates10.1016/j.surfcoat.2005.01.044 ↗
17. An electrochemical and analytical assessment on the early corrosion behaviour of galvanised steel pretreated with aminosilanes10.1016/j.surfcoat.2004.04.088 ↗
18. Effects of addition of corrosion inhibitors to silane films on the performance of AA2024-T3 in a 0.5 M NaCl solution10.1016/j.porgcoat.2003.07.008 ↗
19. Organofunctional silane inhibitor surface treatment for mitigating corrosion of steel in concrete
20. Corrosion protection of steel with DMEA-based organic inhibitor10.1016/j.conbuildmat.2013.03.030 ↗
21. Influence of N, N'-dimethylaminoethanol as an inhibitor on the chloride threshold level for corrosion of steel reinforcement10.1002/maco.200905393 ↗
22. [BMIM]BF4 ionic liquids as effective inhibitor for carbon steel in alkaline chloride solution10.1016/j.electacta.2011.01.081 ↗
23. 1,3-Bis-dibutylaminopropan-2-ol as inhibitor for reinforcement steel in chloride-contaminated simulated concrete pore solution10.1002/maco.201106443 ↗
24. On electrochemical techniques for interface inhibitor research10.1016/S0010-938X(96)00034-0 ↗
25. Carbon steel passivity examined in alkaline solutions: The effect of chloride and nitrite ions10.1016/j.electacta.2008.01.091 ↗
26. Electrochemical polarization I. A theoretical analysis of the shape of polarization curves10.1149/1.2428496 ↗
27. Corrosion rate of steel in concrete—measurements beyond the Tafel law10.1016/j.corsci.2005.06.021 ↗
28. Experimental and theoretical studies for corrosion inhibition of carbon steel by imidazoline derivative in 5% NaCl saturated Ca(OH)2 solution10.1016/j.electacta.2011.09.063 ↗
29. Influence of alkyl chain length of 1, 3-bis-dialkylamino-2-propanol on the adsorption and corrosion behavior of Steel Q235 in simulated concrete pore solution10.1016/S1452-3981(23)16911-2 ↗
30. Interactions of N, N′-dimethylaminoethanol with steel surfaces in alkaline and chlorine containing solutions10.1016/S0169-4332(97)00216-X ↗
31. The performance of a surface-applied corrosion inhibitor for the carbon steel in saturated Ca(OH)2 solutions10.1016/j.cemconres.2013.10.005 ↗