Development of empirical models for chloride binding in cementitious systems containing admixed chlorides
Source abstract
Abstract
Abstract The binding of admixed chlorides in the concrete can delay the corrosion of reinforcing steel and extend the service life of reinforced concrete structures. Although extensive research has been conducted to study the chloride binding capacity of cementitious systems subject to external chlorides, there is little information available on the chloride binding capacity of cementitious systems containing admixed chlorides. In this paper, the chloride binding capacity of several cementitious systems containing ordinary portland cement (OPC), Type C and F fly ashes, slag, and silica fume with different replacement levels is studied using acid-soluble, water-soluble, and pore-pressed testing procedures. In addition, the influence of water-to-binder ratio and admixed chloride levels on the percentages of bound chlorides is explored and discussed. The experimental results indicate that, on average, the concentration of pore-pressed chlorides is significantly lower than the concentration of water-soluble chlorides. Furthermore, the estimated bound chlorides using the pore-pressed chlorides are significantly higher than the bound chloride estimated using water-soluble chlorides. Results show that the Langmuir isotherm can be used to explain the relationship between free and bound chlorides in OPC paste samples containing admixed chlorides. Results of this study also suggest that chloride testing procedures can be very influential in quantifying the concentration of bound chlorides. Therefore, there is a need to standardize the process used for measuring the chlorides in cementitious systems for assessing chloride binding.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Corrosion and Durability · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. A time-variant model of surface chloride build-up for improved service life predictions10.1016/j.cemconcomp.2017.08.008 ↗
2. M. Shakouri, D. Trejo, P. Gardoni, A risk-based model for determining allowable admixed chloride limits in concrete, in International RILEM Conference on Materials, Systems and Structures in Civil Engineering: Conference segment on service life of cement-based materials and structures. 2016: Lyngby, Denmark. p. 631–640.
3. A probabilistic framework to justify allowable admixed chloride limits in concrete10.1016/j.conbuildmat.2017.02.053 ↗
4. Influence of alkali-silica reaction reactivity on corrosion in reinforced concrete
5. Synergistic effects of ASR and fly ash on the corrosion characteristics of RC systems10.1016/j.conbuildmat.2017.07.097 ↗
6. D. Trejo, M. Shakouri, N.P. Vaddey. The Need for Standardized Testing of Input Variables for Reliable Service Life Prediction of Reinforced Concrete Structures, in: International Conference on Advances in Construction Materials and Systems. 2017. Chennai, Inida.10.4324/9781315142074-21 ↗
7. Estimating the critical chloride threshold of reinforcing steel in concrete using a hierarchical Bayesian model
8. Critical chloride content in reinforced concrete–a review10.1016/j.cemconres.2009.08.006 ↗
9. Chloride binding of cement-based materials subjected to external chloride environment–a review10.1016/j.conbuildmat.2008.02.004 ↗
10. Corrosion of reinforcement steel embedded in high water-cement ratio concrete contaminated with chloride10.1016/S0958-9465(98)00018-3 ↗
11. The C1−/OH− ratio in chloride-contaminated concrete — a most important criterion10.1680/macr.1995.47.172.235 ↗
12. Effect of carbonation on release of bound chlorides in chloride-contaminated concrete10.1680/jmacr.15.00234 ↗
13. Releases of bound chlorides from chloride-admixed plain and blended cement pastes subjected to sulfate attacks10.1016/j.conbuildmat.2013.03.068 ↗
14. Chloride binding of cement estimated by binding isotherms of hydrates10.3151/jact.3.77 ↗
15. The effect of supplementary cementitious materials on chloride binding in hardened cement paste10.1016/j.cemconres.2011.01.001 ↗
16. Long-term effects of magnesium chloride and other concentrated salt solutions on pavement and structural portland cement concrete: Phase I results10.1177/0361198106197900109 ↗
17. Chloride binding related to hydration products: part I: ordinary Portland cement10.1016/j.cemconres.2011.09.016 ↗
18. Free and water soluble chloride in concrete10.1016/0008-8846(95)00042-B ↗
19. Chloride binding capacity and binding isotherms of OPC pastes and mortars10.1016/0008-8846(93)90089-R ↗
20. Factors influencing chloride-binding in concrete10.1016/0008-8846(90)90083-A ↗
21. Assessment of simple methods of determining the free chloride ion content of cement paste10.1016/0008-8846(87)90079-2 ↗
22. An investigation of experimental methods used to determine free and total chloride contents10.1016/0008-8846(96)00115-9 ↗
23. P.F. McGrath, Development of test methods for predicting chloride penetration into high performance concrete. 1997: National Library of Canada = Bibliothèque nationale du Canada.
24. Relationship between free chloride and total chloride contents in concrete10.1016/S0008-8846(03)00065-6 ↗
25. ASTM C1218, Standard Test Method for Water-Soluble Chloride in Mortar and Concrete. 2015, ASTM International: West Conshohocken, PA.
26. 178-TMC. Analysis of chloride content in concrete10.1617/13840 ↗
27. AASHTO T260, Standard method of test for sampling and testing for chloride ion in concrete and concrete raw materials. American Association of State Highway and Transportation Offi cials.
28. American Concrete Institute Committee 222, Provisional Standard Test Method for Water-Soluble Chloride Available for Corrosion of Embedded Steel in Mortar and Concrete Using the Soxhlet Extractor. 1996, ACI 222.1–96.
29. Chloride binding in cement II. The influence of the hydroxide concentration in the pore solution of hardened cement paste on chloride binding10.1016/0008-8846(89)90039-2 ↗
30. On the distribution of chloride between the hardening cement paste and its pore solution
31. PFA concrete: chloride-induced reinforcement corrosion10.1680/macr.1994.46.169.269 ↗
32. The influence of C3A content in cement on the chloride transport10.1155/2016/5962821 ↗
33. Effect of cement composition on chloride binding and corrosion of reinforcing steel in concrete10.1016/0008-8846(91)90173-F ↗
34. The binding of chloride ions by sulphate resistant Portland cement10.1016/0008-8846(95)00047-G ↗
35. A model for predicting time-dependent chloride binding capacity of cement-fly ash cementitious system10.1007/BF02479635 ↗
36. Free and combined chloride in hydrating cement and cement components
37. Effect of supplementary cementing materials on concrete resistance against carbonation and chloride ingress10.1016/S0008-8846(99)00249-5 ↗
38. Prediction of chloride binding isotherms of cementitious materials by analytical model or numerical inverse analysis10.1016/j.cemconres.2012.05.008 ↗
39. Chloride binding in sound and carbonated cementitious materials with various types of binder10.1016/j.conbuildmat.2014.05.049 ↗
40. Chloride transport in fly ash and glass powder modified concretes–influence of test methods on microstructure10.1016/j.cemconcomp.2009.11.010 ↗
41. Understanding the interacted mechanism between carbonation and chloride aerosol attack in ordinary Portland cement concrete10.1016/j.cemconres.2017.02.032 ↗
42. Chloride penetration in concrete exposed to cyclic drying-wetting and carbonation10.1016/j.conbuildmat.2016.02.194 ↗
43. Combined effect of carbonation and chloride ingress in concrete10.1016/j.conbuildmat.2016.02.034 ↗
44. Stability of Friedel's salt in carbonated concrete structural elements10.1016/S0008-8846(96)85010-1 ↗
45. Changes in chloride penetration properties caused by reaction between sulfate ions and cement hydrates
46. Pore solution expression as a method to determine the influence of mineral additives on chloride binding10.1016/0008-8846(86)90050-5 ↗
47. The influence of chlorides and sulphates on durability
48. Role of calcium on chloride binding in hydrated Portland cement–metakaolin–limestone blends10.1016/j.cemconres.2017.02.003 ↗
49. Chloride binding capacity of various hydrated cement paste systems10.1016/S1065-7355(97)90003-1 ↗
50. Sorption of chlorides on hydrated cements and C3S pastes
51. Effect of exposure temperature on chloride-binding capacity of cementing materials10.1680/macr.14.00327 ↗
52. Influence of surfactants on chloride binding in cement paste10.1016/j.conbuildmat.2016.08.075 ↗
53. Chloride ingress profiles and binding capacity of mortar in cyclic drying-wetting salt fog environments10.1016/j.conbuildmat.2016.10.059 ↗
54. Investigations of reinforcement corrosion. 1. The pore electrolyte phase in chloride-contaminated concrete10.1007/BF02472078 ↗
55. Effect of calcium chloride on the durability of pre-tensioned wire in prestressed concrete10.1680/macr.1962.14.42.143 ↗
56. Mechanism of Friedel's salt formation in cements rich in tri-calcium aluminate10.1016/S0008-8846(96)85009-5 ↗
57. ASTM C1152, Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete. 2004, ASTM International: West Conshohocken, PA.
58. ASTM C305, Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency. ASTM International, 2014.
59. D. Trejo, A.A. Ahmed, Assessing the automation of the ASTM C1152 test for rapid determination of chloride concentrations of ordinary portland cement systems. Journal of Testing and Evaluation, 2018. Under Review.
60. The influence of chloride binding on the chloride induced corrosion risk in reinforced concrete10.1016/S0010-938X(99)00083-9 ↗
61. J. Neter, M.H. Kutner, C.J. Nachtsheim, W. Wasserman, Applied linear statistical models. Vol. 4. 1996: Irwin Chicago.
62. Probabilistic capacity models and fragility estimates for reinforced concrete columns based on experimental observations
63. Factors influencing chloride test results of cementitious systems