journal article·2019-02

Numerical study on the elastic buckling of cross-laminated timber walls subject to compression

Juan Carlos Pina, Erick I. Saavedra Flores, Karin Saavedra

Publisher page

Abstract

Abstract The recent trend towards the use of Cross-Laminated Timber (CLT) as a novel construction material in mid- and high-rise buildings has steered the research efforts into this subject over the last few years. Despite the considerable progress made on the structural response of CLT, there are still several unresolved issues related to the analysis and design of CLT. This is of great interest for engineers and designers working on the mass timber construction sector. In particular, the buckling behaviour of CLT walls is a problem not fully understood to date. Therefore, in this paper we investigate the buckling capacity of CLT subject to compressive loads. In order to capture the heterogeneities present in wood, a multi-scale modelling strategy is adopted. To improve the numerical predictions, an optimisation-based parameter identification procedure is performed to calibrate the micromechanical parameters of wood. The numerical predictions are compared with experimental results and are validated successfully. The numerical model is then used to study the influence of the number of layers and wall openings on the buckling capacity of CLT walls.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Wood Treatment and Properties · Tree Root and Stability Studies · Bamboo properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. The B1M, Top 5: The world’s tallest timber buildings, 2018. www.theb1m.com/video/top-5-the-world-s-tallest-timber-buildings. Accessed: 2018-08-14.
2. J. Schmidt, C.T. Griffin, Barriers to the design and use of cross-laminated timber structures in high-rise multi-family housing in the United States, in: P.J.S. Cruz (Ed.), Structures and Architecture. New concepts, applications and challenges.
3. Comparison of multi-storey cross-laminated timber and timber frame buildings by in situ modal analysis10.1016/j.conbuildmat.2015.09.056 ↗
4. Gagnon · 2011
5. The Bending-Gradient theory for the linear buckling of thick plates: application to cross laminated timber panels10.1016/j.ijsolstr.2016.02.021 ↗
6. Cross laminated timber (clt): overview and development10.1007/s00107-015-0999-5 ↗
7. Cross-laminated timber plates subjected to concentrated loading. Experimental identification of failure mechanisms10.1111/str.12068 ↗
8. Non-linear simulation of shaking-table tests on 3- and 7-storey x-lam timber buildings10.1016/j.engstruct.2016.01.055 ↗
9. Production and technology of cross laminated timber (CLT): a state-of-theart report
10. An algorithm for the geometric reconstruction of knots within timber boards based on fibre angle measurements10.1016/j.conbuildmat.2016.08.001 ↗
11. Development and experimental validation of a continuum micromechanics model for the elasticity of wood10.1016/j.euromechsol.2005.05.006 ↗
12. 3D hierarchical computational model of wood as a cellular material with fibril reinforced, heterogeneous multiple layers10.1016/j.mechmat.2009.04.011 ↗
13. 3D multiscale micromechanical model of wood: from annual rings to microfibrils10.1016/j.ijsolstr.2010.01.014 ↗
14. Multi-scale modelling of elastic properties of balsa10.1016/j.ijsolstr.2017.01.037 ↗
15. Comparison of unit cell-based computational methods for predicting the strength of wood10.1016/j.engstruct.2017.03.005 ↗
16. Strength predictions of clear wood at multiple scales using numerical limit analysis approaches10.1016/j.compstruc.2017.11.005 ↗
17. On the buckling behavior of cross-ply laminated composite plates due to circular/elliptical cutouts10.1016/j.compstruct.2006.04.071 ↗
18. Buckling analysis of laminated composite plates with an elliptical/circular cutout using fem10.1016/j.advengsoft.2009.09.005 ↗
19. Elasto-plastic buckling of perforated plates under uniaxial compression10.1016/j.tws.2004.03.002 ↗
20. M. Alfaro, R. Ampuero, Determinación de tensiones admisibles para el diseño estructural de paneles de madera contralaminada elaborados con pino radiata crecido en chile, 2014. Undergraduate thesis in Civil Engineering (First supervisor: E.I. Saavedra Flores). Universidad de Santiago de Chile.
21. INN – Instituto Nacional de Normalización, NCh 1761. Of. 2003. madera aserrada, madera laminada y madera preservada, Chile (2003).
22. J. Almendra, J. Contreras, Tensiones de diseño a compresión en elementos esbeltos elaborados con paneles de madera contralaminada, 2018. Undergraduate thesis in Civil Engineering (First supervisor: E.I. Saavedra Flores). Universidad de Santiago de Chile.
23. EWS – Engineering Wood Solutions, EWS Courier, 2007.
24. ANSYS, Parametric, Design Language Guide. Release 15.0, ANSYS Inc., Canonsburg, PA, 15317, http://www.ansys.com2013.
25. On micro-to-macro transitions for multi-scale analysis of non-linear heterogeneous materials: unified variational basis and finite element implementation10.1002/nme.3014 ↗
26. Multi-scale computational homogenization localization for propagating discontinuities using x-fem10.1002/nme.4838 ↗
27. Mechanical model for the deformation of the wood cell wall
28. Multi-scale modelling of rolling shear failure in cross-laminated timber structures by homogenisation and cohesive zone models10.1016/j.ijsolstr.2015.11.027 ↗
29. Computational homogenization of cellular materials10.1016/j.ijsolstr.2014.02.029 ↗
30. Mitchell · 1998
31. Pseudo-adaptive penalization to handle constraints in particle swarm optimizers
32. Multi-scale model updating for the mechanical properties of cross-laminated timber10.1016/j.compstruc.2016.08.009 ↗
33. Genetic algorithm tools for control systems engineering
34. INN – Instituto Nacional de Normalización, Nch 2165. Of. 1991. tensiones admisibles para la madera laminada encolada estructural de pino radiata, Chile (1991).