The role of mortar matrix in the bond behavior and salt crystallization resistance of FRCM applied to masonry
Source abstract
Abstract
Abstract Fiber-reinforced cementitious matrix (FRCM) composites are a new category of composites recently proposed for seismic strengthening of historical masonry structures, to provide a more compatible solution compared with fiber-reinforced polymer (FRP) composites. Despite the rapidly increasing number of research papers dealing with the mechanical behavior of FRCM composites applied to masonry, their long-term performance and susceptibility to weathering processes are still largely unexplored. In this paper, the response of FRCM-masonry joints to accelerated weathering is investigated. A laboratory testing procedure, previously developed by the authors, which involves wetting-drying cycles in water and saline solutions, is employed. Two different types of mortars (based on natural hydraulic lime and Portland cement) were used for the composite matrix, without changing the geometry, the type of masonry substrate and the fibers (galvanized steel cords), in order to assess the role of the matrix in the FRCM-masonry joint bond behavior and deterioration processes. Results show that the matrix played a key role in the debonding mechanism of the FRCM-masonry joints as well as in the capillary absorption of water and in the resulting salt crystallization patterns.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Masonry and Concrete Structural Analysis · Building materials and conservation · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Our architectural heritage: from consciousness to conservation
2. Review of strengthening techniques for masonry using fiber reinforced polymers10.1016/j.compstruct.2016.10.132 ↗
3. Influence of mechanical properties, anisotropy, surface roughness and porosity of brick on FRP debonding force10.1016/j.compositesb.2016.10.020 ↗
4. Influence of water on bond behavior between CFRP sheet and natural calcareous stones10.1016/j.compositesb.2012.03.002 ↗
5. FRP–brick masonry bond degradation under hygrothermal conditions10.1016/j.compstruct.2016.03.037 ↗
6. The effect of high temperature on the performance of CFRP and FRCM confined concrete elements10.1016/j.compositesb.2013.05.016 ↗
7. Effect of thermal ageing and salt decay on bond between FRP and masonry10.1617/s11527-014-0448-7 ↗
8. Strengthening historical masonry with FRP or FRCM: Trends in design approach10.4028/www.scientific.net/KEM.747.166 ↗
9. Mechanical properties and numerical modeling of fabric reinforced cementitious matrix (FRCM) systems for strengthening of masonry structures10.1016/j.compstruct.2013.08.026 ↗
10. Steel fiber reinforced geopolymer matrix (S-FRGM) composites applied to reinforced concrete structures for strengthening applications: a preliminary study10.1016/j.compositesb.2017.07.007 ↗
11. An investigation of the debonding mechanism between FRCM composites and a masonry substrate10.4028/www.scientific.net/KEM.747.382 ↗
12. Durability assessment of impregnated Glass Fabric Reinforced Cementitious Matrix (GFRCM) composites in the alkaline and saline environments10.1016/j.conbuildmat.2015.12.173 ↗
13. Study on local effects of aggressive environmental conditions on masonry strengthened with FRCM
14. Durability performance of FRCM composite bonded to concrete under different environmental aging conditions
15. Durability of steel FRCM-masonry joints: effect of water and salt crystallization10.1617/s11527-017-1070-2 ↗
16. Effects of rising damp and salt crystallization cycles in FRCM-masonry interfacial debonding: towards an accelerated laboratory test method10.1016/j.conbuildmat.2018.04.164 ↗
17. Flexural behaviour of RC members strengthened with FRCM: State-of-the-art and predictive formulas10.1016/j.compositesb.2018.04.051 ↗
18. Flexural behavior of RC beams strengthened with steel-FRCM composite10.1016/j.engstruct.2016.09.006 ↗
19. Reinforced concrete beams strengthened with SRP/SRG systems: experimental investigation10.1016/j.conbuildmat.2015.06.027 ↗
20. A review of direct shear testing configurations for bond between fiber-reinforced polymer sheets on concrete and masonry substrates
21. The role of mortar joints in FRP debonding from masonry10.1016/j.compositesb.2017.10.021 ↗
22. EN 459-1. Building lime – Part 1: Definitions, specifications and conformity criteria (2015).
23. Technical datasheet of GeoCalce® Fino (Kerakoll S.p.A., Italy).
24. EN 998-2. Specification for mortar for masonry – Part 2: Masonry mortar (2016).
25. Technical datasheet of GeoLite® (Kerakoll S.p.A., Italy).
26. EN 12190. Products and systems for the protection and repair of concrete structures – Test methods: Determination of compressive strength of repair mortar (1999).
27. Towards a more effective and reliable salt crystallization test for porous building materials: inputs from past experience
28. MS-A.1 Determination of the resistance of wallettes against sulphates and chlorides. Mater Struct, 31 (1998), pp. 2–19.10.1007/BF02486406 ↗
29. EN 12370. Natural stone test methods. Determination of resistance to salt crystallization (1999).
30. Brard’s test into the 21st century: Sodium sulfate soundness testing of dimension stone
31. Towards the assessment of the shear behaviour of masonry in on-site conditions: a study on dry and salt/water conditioned brick masonry triplets10.1016/j.conbuildmat.2014.05.002 ↗
32. Compressive behaviour of brick masonry triplets in wet and dry conditions10.1016/j.conbuildmat.2015.02.052 ↗
33. Multi-scale analysis on the influence of moisture on the mechanical behavior of ferruginous sandstone10.1016/j.conbuildmat.2013.12.024 ↗
34. Influence of water content on the strength of rock10.1016/j.enggeo.2005.11.011 ↗
35. Effects of water and other dielectrics on crack growth10.1007/BF00752191 ↗
36. Triaxial tests of effects of varied saturations on strength and modulus for sandstone
37. Influence of strain rate and water content on mechanical behavior of dam concrete10.1016/j.conbuildmat.2012.06.046 ↗
38. EN 1015-11. Methods of test for mortar for masonry – Part 11: Determination of flexural and compressive strength of hardened mortar (1999).
39. EN 15801. Conservation of cultural property – Test methods – Determination of water absorption by capillarity (2009).
40. A comparison of the bond behavior of PBO-FRCM composites determined by single-lap and double lap shear tests10.1016/j.cemconcomp.2015.07.007 ↗
41. 3-D numerical modeling of single-lap direct shear tests of FRCM-concrete joints using a cohesive contact damage approach10.1061/(ASCE)CC.1943-5614.0000827 ↗
42. Desalination of masonries and monumental sculptures by poulticing: a review
43. Materials decay and environmental attack in the Pio Palace at Carpi: a holistic approach for historical architectural surfaces conservation10.1016/j.buildenv.2006.04.021 ↗
44. Rising moisture, salts and electrokinetic effects in ancient masonries: from laboratory testing to on-site monitoring10.1016/j.culher.2013.03.003 ↗
45. Challenging transient flooding effects on dampness in brick masonry in Venice by a new technique: the narthex in St. Marco Basilica
46. The role of mortars in ancient brick masonries’ decay: a study in the Pio Palace at Carpi (Italy)