Impulse response test for condition assessment of concrete: A review
Source abstract
Abstract
Abstract The impulse-response test is one of the most versatile nondestructive test (NDT) methods for condition assessment of concrete structures. It is an elastic stress-wave propagation based low-strain and low frequency NDT method, which is widely employed in the NDT industry. Nevertheless, it is used mainly as a relative basis test, in which contour plots of the response parameter are used to distinguish between intact and anomalous regions in the test element. This article is the first to compile current published literature on the subject. A summary of the published case studies using impulse-response test is presented, followed by the current state-of-the-art of the fundamental theoretical understanding of the method. Current knowledge gaps are identified and recommendations are proposed to address these issues. The recommendations are aimed to move the impulse-response test from a qualitative NDT method to a quantitative condition assessment tool for concrete structures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Non-Destructive Testing Techniques · Ultrasonics and Acoustic Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Detection of common defects in concrete bridge decks using nondestructive evaluation techniques10.1061/(ASCE)1084-0702(2007)12:2(215) ↗
2. Nondestructive testing of bridge decks and tunnel linings using Impulse Response
3. Role of NDE in quality control during construction of concrete infrastructures on the basis of service life design10.1016/j.conbuildmat.2003.10.005 ↗
4. Structural field testing of flexible pavement layers with seismic methods for quality control10.3141/1654-06 ↗
5. ACI-228.2R-13, Report on Nondestructive Test Methods for Evaluation of Concrete in Structures, American Concrete Institute, Farmington Hill, MI, www.concrete.org.
6. M. Sansalone, N. Carino, Impact-Echo: A Method for Flaw Detection in Concrete Using Transient Stress Waves', NBSIR 86-3452, National Bureau of Standards, Washington, DC, PB 87-10444/AS (National Technical Information Service, Springfield, MA, 1986), 1986.10.6028/NBS.IR.86-3452 ↗
7. Impact-echo: the complete story
8. Application of nondestructive evaluation to subway tunnel systems
9. Oh · 2012
10. Concrete delamination caused by steel reinforcement corrosion10.1061/(ASCE)0899-1561(2007)19:7(591) ↗
11. Life-cycle modeling of corrosion-affected concrete structures: propagation10.1061/(ASCE)0733-9445(2003)129:6(753) ↗
12. Field performance of continuously reinforced concrete pavement in Illinois10.3141/1684-06 ↗
13. An experimental study of the effect of local contact loss on the earth pressure distribution on existing tunnel linings10.1016/j.tust.2010.08.003 ↗
14. J. Paquet, Etude Vibratoire des Pieux en Beton: Reponse Harmonique et Impulsionelle, Application au Controle, Annales de L'Institut Technique du Batiment et Des Travaux Publics, 1968, pp. 789–803
15. Hertlein · 2007
16. Nondestructive testing of concrete pavement slabs and floors with the transient dynamic response method
17. Assessment of bridge deck repairs by a nondestructive technique
18. Nondestructive testing of concrete chimneys and other structures
19. A. Davis, B. Hertlein, M. Lim, K. Michols, Impact-Echo and Impulse Response stress wave methods: advantages and limitations for the evaluation of highway pavement concrete overlays, in: S.B. Chase, (Ed.) Nondestructive Evaluation of Bridges and Highways, 1996, pp. 273–281.10.1117/12.259127 ↗
20. The nondestructive impulse response test in North America: 1985–200110.1016/S0963-8695(02)00065-8 ↗
21. A. Sadri, K. Mirkhani, Wave Propagation Concrete NDT Techniques for Evaluation of Structures and Materials, ASPNDE 6th International Workshop NDT Signal Processing, 2009.
22. Integrity testing of concrete piles by shock method
23. Clem · 2013
24. Methodology of the assessment of the interlayer bond in concrete composites using NDT methods10.1080/01694243.2017.1343426 ↗
25. Pull-off adhesion prediction of variable thick overlay to the substrate10.1016/j.autcon.2017.10.001 ↗
26. Slab stabilization of portland cement concrete pavements
27. Dynamic stiffness analysis of concrete pavement slabs10.1061/(ASCE)0733-947X(1992)118:4(540) ↗
28. Nondestructive evaluation of concrete radioactive waste tanks10.1061/(ASCE)0887-3828(1997)11:4(161) ↗
29. Evaluating historic concrete bridges
30. A. Davis, C. Petersen, Nondestructive evaluation of prestressed concrete bridges using impulse response, Proceedings Inter. Symp. on Non-Destructive Testing in Civil Engineering (NDT-CE 2003), Berlin, 2003.
31. Rapid non-destructive test method at the Taiwan High-Speed Rail project
32. Rapid and economical evaluation of concrete tunnel linings with impulse response and impulse radar non-destructive methods10.1016/j.ndteint.2004.03.011 ↗
33. Non-destructive evaluation of the concrete floor quality using impulse response s’mash and impact-echo methods
34. Onsite measurements of concrete structures using impact-echo and impulse response
35. H.S. Limaye, Impulse Response Technique: A Valuable Non-Destructive Method to Detect Flaws, ASME 2013 Power Conference, American Society of Mechanical Engineers, 2013, pp. V002T13A001–V002T13A001.
36. Inspection, evaluation and repair monitoring of cracked concrete floor using NDT methods10.1016/j.conbuildmat.2013.06.082 ↗
37. Non-destructive identification of cracks in unilaterally accessible massive concrete walls in hydroelectric power plant10.1016/j.acme.2016.02.009 ↗
38. Methodology of nondestructive identification of defective concrete zones in unilaterally accessible massive members10.3846/13923730.2013.812577 ↗
39. Reinforced concrete antenna pedestal
40. Feasibility of impulse response test for characterizing railway ballasts10.1061/(ASCE)MT.1943-5533.0002143 ↗
41. D. Clem, T. Shumacher, A Fresh Look at Impulse Response as a Form of NDT for Concrete Bridge Decks, ACI Spring Convention March 18–22, Texas, USA, 2012.
42. E.C. Dodge, S.V. Chapa, Impulse response testing – analysis of relative test data, International Symposium on Non-Destructive Testing in Civil Engineering (NDT-CE) September 15–17, 2015, Berlin, Germany.
43. Voids Beneath Slabs-on-Ground
44. Breysse · 2012
45. Evaluation of concrete structures by advanced nondestructive test methods-impact-echo test, impulse response test and radar survey
46. Combining multiple NDT methods to improve testing effectiveness10.1016/j.conbuildmat.2011.01.011 ↗
47. A. Sadeghnejad, S.F. Fancy, A. Valikhani, B. Chunn, A. Mohammadi, R. Taghinezhadbilondy, M. Moravej, J. Gull, A. Yakel, K. Lau, Non-Destructive Testing (NDT) of a Segmental Concrete Bridge Scheduled for Demolition, with a Focus on Condition Assessment and Corrosion Detection of Internal Tendons, 2017
48. Modern acoustic techniques for testing concrete structures accessible from one side only10.1016/j.acme.2014.10.001 ↗
49. New nondestructive way of identifying the values of pull-off adhesion between concrete layers in floors10.3846/13923730.2014.897642 ↗
50. ANN modeling of pull-off adhesion of concrete layers10.1016/j.advengsoft.2015.06.013 ↗
51. Non-destructive identification of pull-off adhesion between concrete layers10.1016/j.autcon.2015.06.004 ↗
52. Non-destructive evaluation of the bond between a concrete added repair layer with variable thickness and a substrate layer using ANN10.1016/j.proeng.2017.02.049 ↗
53. Non-destructive evaluation of the pull-off adhesion of concrete floor layers using RBF neural network10.3846/13923730.2013.790838 ↗
54. Non-destructive neural identification of the bond between concrete layers in existing elements10.1016/j.conbuildmat.2016.09.146 ↗
55. Hybrid metaheuristic-neural assessment of the adhesion in existing cement composites10.3390/coatings7040049 ↗
56. Development of nondestructive small-strain methods for testing deep foundations: a review
57. From theory to field experience with the non-destructive vibration testing of piles
58. ASTM-D5882 · 2016
59. Comparing cross-hole sonic logging and low-strain integrity testing results
60. Comparison of pulse echo and transient response pile integrity test methods
61. Impulse response testing to evaluate the degree of alkali-aggregate reaction in concrete drilled-shaft foundations for electricity transmission towers10.1117/12.302523 ↗
62. R.J. Finno, S.L. Gassman, P.W. Osborn, Non-destructive evaluation of a deep foundation test section at the Northwestern University national geotechnical experimentation site, A Report Submitted to the Federal Highway Administration Office, Northwestern University, Evanston, Illinois, 1997.
63. Impulse response evaluation of drilled shafts10.1061/(ASCE)1090-0241(1998)124:10(965) ↗
64. Assessment and reuse of old foundations10.3141/1736-07 ↗
65. Gassman · 1997
66. Impulse response evaluation of foundations using multiple geophones10.1061/(ASCE)0887-3828(1999)13:2(82) ↗
67. Cutoff frequencies for impulse response tests of existing foundations10.1061/(ASCE)0887-3828(2000)14:1(11) ↗
68. Impulse response evaluation of drilled shafts with pile caps: modeling and experiment10.1139/l03-086 ↗
69. Dynamic response of intact piles to impulse loads10.1002/(SICI)1096-9853(199704)21:4<255::AID-NAG869>3.0.CO;2-J ↗
70. Identification of defects in piles through dynamic testing10.1002/(SICI)1096-9853(199704)21:4<277::AID-NAG870>3.0.CO;2-0 ↗
71. J.-L. Briaud, M. Ballouz, G. Nasr, Defect and length predictions by NDT methods for nine bored piles, Deep Foundations 2002: An International Perspective on Theory, Design, Construction, and Performance 2002, pp. 173–192.10.1061/40601(256)13 ↗
72. Predictions in soil engineering10.1680/geot.1973.23.2.151 ↗
73. Non-destructive test for pile beneath bridge in the time, frequency, and time-frequency domains using transient loading10.1007/s11071-010-9721-7 ↗
74. Estimating the flaw size in drilled shafts using an impulse response method10.1007/s12205-011-0206-0 ↗
75. Experimental study for the evaluation of stress wave approaches on a group pile foundation10.1016/j.ndteint.2012.01.006 ↗
76. Abdelrahman · 2011
77. A. Khosravi, S. Abdelrahman, J. McCartney, Evaluation of Thermal Soil-Structure Interaction in Energy Foundations Using an Impulse-Response Test, GeoCongress 2012: State of the Art and Practice in Geotechnical Engineering 2012, pp. 4466–4475.10.1061/9780784412121.459 ↗
78. Integrity evaluation of PCC piles using the surface reflection method10.1111/j.1747-1567.2012.00832.x ↗
79. Integrity testing of model piles with pile cap
80. Rashidyan · 2017
81. Non-destructive evaluations of in-service concrete piles by flexural wave approach
82. NDE techniques for concrete and masonry structures10.1002/pse.146 ↗
83. Reddy · 1992
84. Desai · 1991
85. S. Nazarian, S. Reddy, M. Baker, Determination of voids under rigid pavements using impulse response method, Nondestructive Testing of Pavements and Back Calculation of Moduli: Second Volume, ASTM International, 1994.10.1520/STP18165S ↗
86. Use of seismic pavement analyzer in pavement evaluation
87. Study of parameters affecting impulse response method10.1061/(ASCE)0733-947X(1996)122:4(308) ↗
88. Theoretical interpretation of impulse response tests of embedded concrete structures
89. Nondestructive identification of delaminations in concrete floor toppings with acoustic methods10.1016/j.autcon.2011.02.002 ↗
90. Understanding the impulse response method applied to concrete bridge decks10.1063/1.4789197 ↗
91. R.M. Barker, J.M. Duncan, K.B. Rojiani, P.S. Ooi, C. Tan, S. Kim, Manuals for the design of bridge foundations: shallow foundations, driven piles, retaining walls and abutments, drilled shafts, estimating tolerable movements, and load factor design specifications and commentary, 1991.
92. Evaluation of nondestructive test methods for length, diameter, and stiffness measurements on drilled shafts
93. Nondestructive diagnosis of drilled shaft foundations10.3141/1633-16 ↗
94. Comparison of methods for determining specific acoustic impedance10.1121/1.418558 ↗
95. Rapid detection of fatigue cracking in steel anchor rods using the impulse response method, NCHRP innovation deserving exploratory analysis programs (NCHRP No. 175)
96. ASTM C1740-16 · 2016
97. Training: Often the missing link in using NDT methods10.1016/j.conbuildmat.2011.03.060 ↗
98. Techniques for nondestructive testing of concrete infrastructure at electric power plants
99. S.-H. Ni, Y.-Z. Yang, C.-R. Lyu, Application of wavelet analysis for the impulse response of pile, The 2014 World Congress on Advances in Civil, Environmental and Material Research (ACEM 14) Busan, South Korea, 2014.
100. Evaluation of pile defects using complex continuous wavelet transform analysis10.1016/j.ndteint.2017.01.007 ↗