journal article·2019-06

Development of lightweight concrete using prickly pear fibres

Zied Kammoun, Abderraouf Trabelsi

Publisher page

Abstract

Abstract This experimental work aims to develop an eco-lightweight concrete using prickly pear fibres and to assess their physico-mechanical properties. Thus, the study is devoted to determine physical, mechanical and thermal characteristics of concrete based on prickly pear fibres treated with hot water as well as investigating the effect of the fibre length. The obtained results show that, depending on the amount of prickly pear fibres used in the concrete, a 170% flexural strength improvement can be reached. Significant improvements are also recorded when it comes to lightness (up to 25% lighter than conventional concrete) also thermal characteristics (a decrease of 42% in thermal conductivity). However, the use of prickly pears decreases the compressive strength which remains acceptable even if the fibres content is 15 kg/m 3 , and increases the dimensional variations but without approaching the recommended limit of the shrinkage values for wood concretes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovations in Concrete and Construction Materials · Natural Fiber Reinforced Composites · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Agricultural wastes as aggregate in concrete mixtures–a review10.1016/j.conbuildmat.2013.11.074 ↗
2. Development of sustainable construction material using industrial and agricultural solid waste: a review of waste-create bricks10.1016/j.conbuildmat.2011.04.038 ↗
3. Use of agro-wastes in building materials in the mediterranean area: a review10.1016/j.egypro.2017.08.147 ↗
4. Application of agro-waste for sustainable construction materials: a review10.1016/j.conbuildmat.2012.09.011 ↗
5. Concrete using agro-waste as fine aggregate for sustainable built environment–a review10.1016/j.ijsbe.2016.06.003 ↗
6. Effect of the addition of wood shavings on thermal conductivity of sand concretes: experimental study and modelling10.1016/j.conbuildmat.2005.12.008 ↗
7. Contribution to the development of a sand concrete lightened by the addition of barley straws10.1016/j.conbuildmat.2016.03.067 ↗
8. Compressive and flexural properties of hemp fiber reinforced concrete10.1007/BF02902998 ↗
9. Mechanical performance and durability of treated palm fiber reinforced mortars10.1016/j.ijsbe.2014.04.002 ↗
10. Lightweight construction materials: mortar reinforced with date-palm mesh fibres10.1016/j.tafmec.2018.12.011 ↗
11. Overview on biobased building material made with plant aggregate10.21809/rilemtechlett.2016.9 ↗
12. Improvement of mechanical properties of green concrete by treatment of the vegetals fibers10.1016/j.conbuildmat.2013.05.073 ↗
13. Performance of polymer concrete incorporating waste marble and alfa fibers
14. Cementitious building materials reinforced with vegetable fibres: a review10.1016/j.conbuildmat.2010.07.024 ↗
15. Plant-based natural fibre reinforced cement composites: a review10.1016/j.cemconcomp.2016.02.014 ↗
16. Use of green chemistry methods in the extraction of dietary fibers from cactus rackets (opuntia ficus indica): structural and microstructural studies10.1016/j.ijbiomac.2018.05.090 ↗
17. Cement-based, materials-enhanced durability from opuntia ficus indica mucilage additions
18. Physical properties of cement-based paste and mortar with dehydrated cacti additions10.1080/15583058.2013.800919 ↗
19. Concrete durability properties and microstructural analysis of cement pastes with nopal cactus mucilage as a natural additive10.3989/mc.2012.00211 ↗
20. Influence of cactus mucilage and marine brown algae extract on the compressive strength and durability of concrete
21. Study of nopal mucilage and marine brown algae extract as viscosity-enhancing admixtures for cement based materials10.1016/j.conbuildmat.2013.11.068 ↗
22. Cactus fibre/polyester biocomposites: manufacturing, quasi-static mechanical and fatigue characterisation10.1016/j.compscitech.2012.10.009 ↗
23. Cellulose fiber from tunisian barbary fig opuntia ficus-indica for papermaking10.1007/s10570-016-0899-9 ↗
24. Green process for fibrous networks extraction from opuntia (cactaceae): morphological design, thermal and mechanical studies10.1016/j.indcrop.2018.10.033 ↗
25. Improvement of the properties of a sand concrete containing barley straws–treatment of the barley straws10.1016/j.conbuildmat.2016.04.065 ↗
26. Effects of treatment of coir fiber and cement/fiber ratio on properties of cement-bonded composites10.15376/biores.6.3.3481-3492 ↗
27. Mechanical characteristics of a classical concrete lightened by the addition of treated straws
28. Seismic retrofitting of a tower with shear wall in uhpc based dune sand
29. A comparative study between bio-composites obtained with opuntia ficus indica cladodes and flax fibers10.1007/s10924-013-0595-x ↗
30. Thermal and mechanical performance of natural mortar reinforced with date palm fibers for use as insulating materials in building10.1016/j.enbuild.2014.05.032 ↗