The effect of prolonged storage time on asphalt rubber binder properties
Source abstract
Abstract
Abstract This study wants to provide fundamental understanding of prolonged storage time on asphalt rubber binder properties by performing an investigation on the variation of conventional properties, rheology and morphology of four asphalt rubbers maintained at 180 °C in low shear for different digestion/storage times up to 48 h. The analysed asphalt rubbers were manufactured by combining two different asphalt binder grades, pen 35/50 and pen 50/70, with both cryogenic and ambient crumb rubber. Results have shown that keeping asphalt rubber agitated at the above mentioned processing conditions, up to 48 h, is significantly detrimental when an ambient crumb rubber is used, while it seems not to negatively affect the asphalt rubber produced with cryogenic rubber crumbs. Instead, no remarkable change is recorded when asphalt rubbers are produced with the same rubber type and by changing the base asphalt binders, namely pen 35/50 and pen 50/70.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. AASHTO, 1998. Standard Test Method for Determining the Rheological Properties of Asphalt Using a Dynamic Shear Rheometer (DSR) - TP5-98.
2. Asphalt rubber laboratory properties related to type and process technology of crumb rubber
3. Effect of crumb rubber modifiers (CRM) on performance-related properties of asphalt binders
4. Rheological characteristics of EVA modified bitumens and their correlations with bitumen concrete properties10.1016/j.conbuildmat.2013.07.032 ↗
5. CALTRANS, 2003. Asphalt rubber usage guide, Sacramento, California.
6. CALTRANS, 2005. Use of scrap tire rubber - State of the technology and best practices. Sacramento, California.
7. Investigation of asphalt binder containing various crumb rubbers and asphalts10.1016/j.conbuildmat.2012.11.063 ↗
8. Influence of crumb rubber and digestion time on the asphalt rubber binders10.3166/rmpd.7.131-148 ↗
9. Swelling process of rubber in asphalt and its effect on the structure and properties of rubber and asphalt10.1016/j.conbuildmat.2011.10.021 ↗
10. Evaluating permanent deformation in asphalt rubber mixtures10.1016/j.conbuildmat.2009.12.021 ↗
11. A study into the processing of asphalt modified with tire crumb rubber and polymeric additives10.1016/j.fuproc.2011.11.018 ↗
12. R.G. Hicks, J.A. Epps, Quality Control for Asphalt Rubber Binders and Mixes, Tempe, Arizona, 2000.
13. E. Hunt, Crumb Rubber Modified Asphalt Concrete in Oregon. Report n° FHWA-OR-RD-02-13. Washington, D.C., 2002.
14. Interaction effects of crumb rubber modified asphalt binders10.1016/j.conbuildmat.2009.10.024 ↗
15. J.K.K. Jung, G. Way, Life Cycle Cost Analysis: Conventional versus Asphalt Rubber Pavements, Tempe, Arizona, 2002.
16. Reduced thickness asphalt rubber concrete leads to cost effective pavement rehabilitation
17. The effect of crumb rubber modifier (CRM) on the performance properties of rubberized binders in HMA pavements10.1016/j.conbuildmat.2007.04.010 ↗
18. Recycled tyre rubber modified asphalts for road asphalt mixtures: a literature review10.1016/j.conbuildmat.2013.09.007 ↗
19. Tyre rubber-modified bitumens development: the effect of varying processing conditions10.1080/14680629.2013.837837 ↗
20. Toward more realistic viscosity measurements of tyre rubber–bitumen blends10.1016/j.conbuildmat.2014.03.038 ↗
21. Relación de los Firmes Asfálticos Fabricados con Neumáticos Usados (PNFU) y la Seguridad Vial
22. Investigating the rheological properties of crumb rubber modified asphalt and its correlation with temperature susceptibility10.1590/S1516-14392012005000166 ↗
23. M. McNerney, B. Landsberger, T. Turen, A. Pandelides, A Comparative field measurements of tire/pavement noise of selected Texas pavements. Research Report No. 7-2957-2, Austin, 2000.
24. The influence of temperature variation in the prediction of the pavement overlay life10.1080/14680629.2005.9690012 ↗
25. The temperature effect on the reflective cracking of asphalt overlays10.1080/14680629.2008.9690141 ↗
26. Effects of various long-term aging procedures on the rheological properties of laboratory prepared rubberized asphalt asphalts
27. Analysis of digestion time and the crumb rubber percentage in dry-process crumb rubber modified hot bituminous mixes10.1016/j.conbuildmat.2010.11.029 ↗
28. Dense graded hot mixes using asphalt-rubber binders with high rubber contents10.1080/14680629.2006.9690025 ↗
29. Investigating the properties of crumb rubber modified asphalt using classic and SHRP testing methods10.1016/j.conbuildmat.2011.06.048 ↗
30. Optimization of asphalt rubber hot mixes based on performance laboratory tests
31. Mutual changes in bitumen and rubber related to the production of asphalt rubber binders10.1016/j.conbuildmat.2012.06.030 ↗
32. Rheological quantification of bitumen aging: definition of a new sensitive parameter
33. Crumb rubber modification of binders: interaction and particle effects
34. SHRP · 1994
35. Sousa · 2001
36. Rubberised bitumen manufacturing assisted by rheological measurements10.1080/14680629.2015.1079549 ↗
37. Effect of crumb rubber particle size and concentration on performance grading of rubber modified asphalt binders
38. Assessment of the digestion time of asphalt rubber binder based on microscopy analysis10.1016/j.conbuildmat.2013.05.087 ↗
39. T. Volle, Performance of Rubberized asphalt pavements in Illinois. Report No: FHWA/IL/PRR-136, 2000.
40. Laboratory evaluation on high temperature viscosity and low temperature stiffness of asphalt binder with high percent scrap tire rubber10.1016/j.conbuildmat.2011.06.061 ↗
41. Microstructure and performance of crumb rubber modified asphalt10.1016/j.conbuildmat.2009.06.038 ↗