journal article·2019-07

Interfacial bond-slip degradation relationship between CFRP plate and steel plate under freeze-thaw cycles

Yuyang Pang, Gang Wu, Haitao Wang, Ye Liu

Publisher page

Abstract

Abstract The bond-slip degradation relationship of a carbon fiber reinforced polymer (CFRP)-steel bonded interface is crucial for predicting the long-term behavior of CFRP-strengthened steel structure under a freeze-thaw (F-T) environment. A total of 16 single-shear bonded joints were tested to investigate the effect of the bond length and the F-T cycles on the CFRP-steel bonded interfaces. The strains on the CFRP surface and the relative slips between the CFRP plate and steel plate were measured by using three-dimensional digital image correlation (3D-DIC) technology. The main properties of the bonded joints were examined, including the failure mode, the ultimate load, the load-slip curve, the CFRP strain distribution and the bond-slip relationship. The degradation models for the bond-slip parameters were formulated by introducing the damage factors, and the interfacial bond-slip degradation relationships were subsequently developed. Finally, the proposed degradation relationship was validated through comparison with the experimental bond-slip relationships and the predicted relationships under different F-T cycles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. American Society of Civil Engineers (ASCE) · 2013
2. Bond-slip models for CFRP plates externally bonded to steel substrates10.1016/j.compstruct.2017.10.033 ↗
3. Effects of moisture on the long-term performance of adhesively bonded FRP/steel joints used in bridges10.1016/j.compositesb.2016.02.021 ↗
4. Fatigue retrofitting of cracked steel beams with CFRP laminates10.1016/j.compstruct.2018.02.090 ↗
5. Effect of dynamic loading and environmental conditions on the bond between CFRP and steel: state-of-the-art review10.1061/(ASCE)CC.1943-5614.0000419 ↗
6. Interaction between CFRP-repair and initial damage of wide-flange steel beams subjected to three-point bending10.1016/j.compstruct.2011.02.024 ↗
7. A numerical evaluation of the interlaminar stress state in externally FRP plated RC beams10.1016/S1359-8368(03)00018-0 ↗
8. Preparation and characterization of steel surfaces for adhesive bonding10.1061/(ASCE)CC.1943-5614.0000387 ↗
9. Shear strengthening of steel plates using small-diameter CFRP strands10.1016/j.compstruct.2017.09.094 ↗
10. Crack propagation prediction of double-edged cracked steel beams strengthened with FRP plates10.1016/j.tws.2018.02.018 ↗
11. Fatigue behavior of cracked steel plates strengthened with different CFRP systems and configurations10.1061/(ASCE)CC.1943-5614.0000647 ↗
12. Effect of FRP configurations on the fatigue repair effectiveness of cracked steel plates
13. Effects of ultraviolet radiation and associated elevated temperature on mechanical performance of steel/CFRP double strap joints10.1016/j.compstruct.2012.05.036 ↗
14. Environmental durability of a CFRP system for strengthening steel structures10.1016/j.conbuildmat.2010.02.023 ↗
15. A. Al-Shawaf, R. Al-Mahaidi, X.L. Zhao, Study on bond characteristics of CFRP/steel double-lap shear joints at subzero temperature exposure, in: Proc., 3rd Int. Conf. on FRP Composites in Civil Engineering (CICE 2006), International Institute for FRP in Construction, Hong Kong, 2006, pp. 71–74.
16. Effect of elevated temperature on bond behaviour of high modulus CFRP/steel double-strap joints
17. Bond behavior of CFRP-steel double-lap joints exposed to marine atmosphere and fatigue loading10.1016/j.engstruct.2018.08.012 ↗
18. Bond durability of fatigued CFRP-steel double-lap joints pre-exposed to marine environment10.1016/j.compstruct.2015.06.021 ↗
19. Dual function behavior of carbon fiber reinforced polymer in simulated pore solution10.3390/ma9020103 ↗
20. Galvanic corrosion of carbon and steel in aggressive environments10.1061/(ASCE)1090-0268(2001)5:3(200) ↗
21. Gillespie · 1996
22. Cold region durability of a two-part epoxy adhesive in double-lap shear joints: experiment and model development10.1016/j.conbuildmat.2012.04.026 ↗
23. Influence of freeze–thaw cycling on the bond strength of steel–FRP lap joints10.1016/j.compositesb.2013.12.024 ↗
24. Durability of CFRP/steel joints under cyclic wet-dry and F-T conditions10.1016/j.compositesb.2017.06.011 ↗
25. Chinese Standard GB/T 228.1 · 2010
26. Chinese Standard GB/T 3354 · 1999
27. ASTM International, D638-10. Standard test method for tensile properties of plastics, Annu. B ASTM Stand, 2010.
28. Progress in the technique of upgrading metallic structures with advanced polymer composites10.1002/pse.112 ↗
29. State-of-the-art review on FRP strengthened steel structures10.1016/j.engstruct.2006.10.006 ↗
30. S.J. Kim, S.T. Smith, B. Young, Effect of surface preparation on the strength of FRP-to-mild steel and FRP-to-stainless steel joint, in: Proceedings of the 5th international conference on FRP composites in civil engineering, Beijing, China, 2010.10.1007/978-3-642-17487-2_191 ↗
31. Fernando · 2010
32. Proposed design guidelines for strengthening of steel bridges with FRP materials10.1016/j.conbuildmat.2006.03.003 ↗
33. Chinese Standard GB/T 50082-2009 · 2009
34. Effect of postcure conditions on the dynamic mechanical behavior of water-based polymer–isocyanate adhesive for wood10.1007/s10086-008-0966-4 ↗
35. Long-term development of thermophysical and mechanical properties of cold-curing structural adhesives due to post-curing10.1002/app.37965 ↗
36. Determination of the bond-slip behavior of CFRP-to-steel bonded interfaces using digital image correlation10.1177/0731684416651342 ↗
37. Debonding of CFRP-to-steel joints with CFRP delamination10.1016/j.compstruct.2016.05.100 ↗
38. Biscaia, Carlos Chastre. CFRP-to-steel bonded joints subjected to cyclic loading: an experimental study10.1016/j.compositesb.2018.03.039 ↗
39. Derivation of the bond–slip characteristics for FRP plated steel members10.1016/j.jcsr.2010.03.003 ↗
40. Effect of carbon nanotube modified epoxy adhesive on CFRP-to-steel interface10.1016/j.compositesb.2015.03.063 ↗
41. Predictive response of notched steel beams repaired with CFRP strips including bond-slip behavior10.1142/S0219455412004628 ↗
42. Bond characteristics between ultrahigh modulus CFRP laminates and steel10.1016/j.tws.2011.10.010 ↗
43. Experimental study on bond behavior between CFRP plates and steel substrates using digital image correlation10.1061/(ASCE)CC.1943-5614.0000701 ↗