journal article·2019-08

Impact of high-temperature-water cooling damage on the mechanical properties of concrete

Yue Zhai, Yan Li, Yubai Li, Siwei Wang, Yi Liu, Ki-Il Song

Publisher page

Abstract

Abstract A series of impact tests were conducted on split Hopkinson pressure bar equipment to study the influence of high-temperature-cooling damage on the mechanical properties of concrete. The experimental investigation showed the influence on the peak stress, peak strain, and fracture mode. The results indicate that the strain rate is directly related to the loading rate and heating temperature. The test results of natural cooling and water immersion cooling treatment were compared, which showed that the strength of water-cooled specimens is higher than that of naturally cooled specimens before the heating temperature reaches 400 °C and becomes much lower when the heating temperature is higher than 400 °C. Based on the experimental study, a dynamic non-linear elastic constitutive equation was established using a particle swarm optimization algorithm and an inversion analysis method. These results could provide theoretical references for the design of the ultimate strength of concrete materials for practical applications, such as fire and explosion prevention.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fire effects on concrete materials · Structural Response to Dynamic Loads · Engineering and Material Science Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. A microstructural hydration model for cemented paste backfill considering internal sulfate attacks10.1016/j.conbuildmat.2019.03.222 ↗
2. An experimental study on the early-age hydration kinetics of cemented paste backfill10.1016/j.conbuildmat.2019.03.322 ↗
3. Stress wave propagation in viscoelastic-plastic rock-like materials10.3390/ma9050377 ↗
4. A versatile split Hopkinson pressure bar using electromagnetic loading10.1016/j.ijimpeng.2018.02.002 ↗
5. Static and dynamic mechanical properties of concrete after high temperature treatment
6. Experimental investigation on dynamic compression mechanical performance of concrete at high temperature
7. Research on energy dissipation and fractal characteristics of concrete after exposure to elevated temperatures under impact loading
8. SHPB test on dynamical mechanical behavior of concrete with high temperature10.4028/www.scientific.net/AMM.71-78.760 ↗
9. Experiment for dynamic mechanical properties of concrete at high temperatures
10. Static and dynamic mechanical properties of concrete after high temperature exposure10.1016/j.msea.2012.02.058 ↗
11. Experimental study on the dynamic compressive mechanical properties of concrete at elevated temperature10.1016/j.matdes.2013.11.024 ↗
12. Experimental study on dynamic behaviours of concrete after exposure to high temperatures up to 700 °C10.1617/s11527-012-9899-x ↗
13. Element size and other restrictions in finite-element modeling of reinforced concrete at elevated temperatures
14. What physical phenomena can be neglected when modelling concrete at high temperature? A comparative study. Part 1: Physical phenomena and mathematical model10.1016/j.ijsolstr.2011.03.004 ↗
15. Constitutive model for compressive strength and elastic modulus for concrete under elevated temperature
16. The dynamic mechanical constitutive equation of concrete under high temperature10.4028/www.scientific.net/AMM.99-100.782 ↗
17. Effect of fibre type and geometry on maximum pore pressures in fibre-reinforced high strength concrete at elevated temperatures10.1016/j.cemconres.2011.11.014 ↗
18. Mechanical properties and microstructure of high strength concrete containing polypropylene fibers exposed to temperatures up to 200°C10.1016/j.cemconres.2005.03.007 ↗
19. An application of a damage constitutive model to concrete at high temperature and prediction of spalling10.1016/j.ijsolstr.2005.06.016 ↗
20. Moisture transport in heated concrete, as studied by NMR, and its consequences for fire spalling10.1016/j.cemconres.2007.03.004 ↗
21. Three-wave mutual-checking method for data processing of SHPB experiments of concrete10.1017/jmech.2014.55 ↗
22. Stochastic damage constitutive law for fire-damaged concrete
23. Study on compressive mechanical capabilities of concrete after high temperature exposure and thermo-damage constitutive model10.1016/j.conbuildmat.2014.06.052 ↗
24. Experimental study on dynamic properties and constitutive model of poly propylene fibre concrete under high-strain rates10.1080/19648189.2013.834601 ↗
25. Mechanical properties of concrete at high temperature – a review10.1016/j.conbuildmat.2015.05.131 ↗
26. ASTM · 2001
27. Compressive strength of concrete cores under high strain rates10.1061/(ASCE)CF.1943-5509.0000586 ↗
28. Pulse shaper design for dynamic testing of viscoelastic materials using polymeric SHPB10.1016/j.ijimpeng.2014.08.016 ↗
29. Split Hopkinson pressure bar data reduction methodology for linear materials with memory
30. Influences of cooling mode and high temperature on concrete compressive strength
31. Dynamic constitutive relation of concrete under impact
32. Constitutive model of short-time loading of concrete10.1061/JMCEA3.0002446 ↗