Influence of ZnO-doping on the properties of high-ferrite cement clinker
Source abstract
Abstract
Abstract Responding to the strategy of sustainable development, Cement manufacturing industry become an effective method to dispose municipal solid waste (MSW). Zinc is a heavy metal element that might be introduced by industrial wastes to the cement kilns, resulting in a performance degradation. High-Ferrite Cement (HFC), as a kind of sulphate-resistant Portland cement has attracted extensive interesting. Different from the mineral composition of Portland cement, HFC have a low C3S and high C4AF, which may be have a better solidification capacity due to the content increase of solid solution C4AF. This study attempt to explore the influence of doping ZnO on the performance of HFC. The results indicated that the compressive strength of 28 days increased from 57.1 to 70.3 MPa when the content of doping ZnO reached 1.5 wt% and hydration reactivity increased with the increase of ZnO content. The reason could be ascribed to the decrease of retardation effect on C3S and increase of promotion effect on C4AF with the change of miner composition of cement clinker. Beyond that, promotion plays a pivotal role between the two factors. The mechanism analysis indicated that ZnO doping promoted the transformation of Fe in the C4AF from [FeO4] to [FeO6] and increased the effective charge, resulting in a higher hydration reactivity. The result obtained varied from that reported in previous researches, and proved out that HFC can be a good material to Zn solidification/stabilization.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Tailings Management and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Corrosion of steel in concrete, Report 4.82
2. Chloride attack of reinforced concrete: an overview10.1007/BF02473172 ↗
3. Influence of detection methods on chloride threshold value for the corrosion of steel reinforcement10.1016/j.conbuildmat.2008.09.011 ↗
4. Impact of specification changes on chloride-induced corrosion service life of bridge decks10.1016/S0008-8846(02)00760-3 ↗
5. Influence of CaCl2 and NaCl from different sources on chloride threshold value for the corrosion of steel reinforcement in concrete10.1016/j.conbuildmat.2010.07.023 ↗
6. A study of the effect of chloride binding on service life predictions10.1016/S0008-8846(00)00339-2 ↗
7. The effect of supplementary cementitious materials on chloride binding in hardened cement paste10.1016/j.cemconres.2011.01.001 ↗
8. Factors influencing chloride binding in concrete10.1016/0008-8846(90)90083-A ↗
9. Developing chloride resisting concrete using PFA10.1016/S0008-8846(97)00146-4 ↗
10. Chloride binding in cement pastes in equilibrium with synthetic pore solution
11. Redefining cement characteristics for sulfate-resistant Portland cement10.1016/S0008-8846(02)00767-6 ↗
12. M.T. Gaztanaga, S. Goni, A.M. Guerrero, et al. Carbonation of hydrated calcium aluminate cement and ordinary Portland cements of varying alkali content, in: proceeding of the 10th international Congress on the Chemistry of cement, vol. x. 1997.
13. Influence of sulfates on chloride binding in cements10.1016/0008-8846(94)90078-7 ↗
14. The influence of gaize addition on sulphate corrosion of CEM II/A and CEM II/B cements10.1016/j.proeng.2015.06.147 ↗
15. Some aspects and mechanisms of sulphate attack
16. Hydration of ferrite Ca2AlFeO5 in the presence of sulphates and bases10.1016/S0008-8846(96)00154-8 ↗
17. The effect of supplementary cementitious materials on the permeability of chloride in steam cured high-ferrite Portland cement concrete10.1016/j.conbuildmat.2018.11.107 ↗
18. A review of accelerated carbonation technology in the treatment of cement-based materials and sequestration of CO210.1016/j.jhazmat.2004.04.019 ↗
19. Factors affecting hazardous waste solidification/stabilization: a review10.1016/j.jhazmat.2006.01.065 ↗
20. Influence of Cr, Ni, and Zn on the properties of pure clinker phases Part I. C3S[J]10.1016/S0008-8846(99)00009-5 ↗
21. Polymorphism and hydration of tricalcium silicate doped with ZnO10.1111/j.1151-2916.1983.tb09956.x ↗
22. Sur la répartition des éléments de transition et leur influence sur quelques propriétés du clinker
23. Zinc oxide in cement clinkering: part 2 hydration, strength gain and hydrate mineralogy10.1680/adcr.2000.12.4.173 ↗
24. R. Barbarulo, F. Sorrentino, C. Sing, Impact of ZnO on Clinker Composition and Reactivity —Coupling with MgO, in: 12th International Congress on the Chemistry of Cement, Montréal, Canada, 2007.
25. Highly efficient visible light photocatalytic reduction of CO2 to hydrocarbon fuels by Cu-nanoparticle decorated graphene oxide10.1021/nl503609v ↗
26. Incorporation of trace elements in Portland cement clinker: thresholds limits for Cu, Ni, Sn or Zn10.1016/j.cemconres.2011.07.006 ↗
27. Managing trace elements in Portland cement – Part II: comparison of two methods to incorporate Zn in a cement10.1016/j.cemconcomp.2011.03.008 ↗
28. Immobilization of heavy metal in cement-based solidification/stabilisation: a review10.1016/j.wasman.2008.01.019 ↗
29. Influence de la composition d’un ciment Portland sur son hydratation en présence de Zinc10.1016/0008-8846(90)90096-G ↗
30. Solid solution between Al-ettringite and Fe-ettringite Ca6[Al1-xFex(OH)6]2(SO4)3·26H2O10.1016/j.cemconres.2009.03.001 ↗
31. Iron in carbonate containing AFm phases10.1016/j.cemconres.2010.11.017 ↗
32. Characterization by solid-state NMR and selective dissolution techniques of anhydrous and hydrated CEM V cement pastes10.1016/j.cemconres.2009.10.005 ↗
33. Quantitative aspects of 27Al MAS NMR of calcium aluminoferrites10.1016/S1065-7355(97)00017-5 ↗
34. In situ Raman analysis of hydrating C3A and C4AF pastes in presence and absence of sulphate10.1179/174367606X120179 ↗
35. Hydration of calcium aluminates and calcium sulfoaluminate studied by Raman spectroscopy10.1016/j.cemconres.2013.01.015 ↗