journal article·2019-11

Fresh and hardened properties of self-compacting concretes produced with diabase and gneiss quarry by-product powders as alternative fillers

Rudiele Aparecida Schankoski, Ronaldo Pilar, Paulo Ricardo de Matos, Luiz Roberto Prudêncio, Raissa Douglas Ferron

Publisher page

Abstract

Abstract This work investigated the use of diabase (D) and gneiss (G) quarry powders as alternatives to limestone filler (L) for self-compacting concrete (SCC) production. For this, SCCs with the different quarry powders, each one in three different particle size distributions, were produced. The shape and texture of the particles were evaluated through SEM image analysis. The fresh state properties of the SCCs were evaluated by the workability tests slump flow, V-Funnel, J-ring and VSI, and by rheometry. The cement hydration was evaluated in pastes by isothermal calorimetry up to 40 h, and thermogravimetric analysis (TGA) at 28 days. Finally, the compressive and splitting tensile strength, cement index and modulus of elasticity of the SCCs were determined at 28 days. The results showed that the SCCs containing D and G had fresh state properties equivalent to those containing L or only Portland cement, with slump flow of 700 ± 50 mm, V-Funnel time from 4.3 to 8.0 s, and VSI of 0 or 1. The isothermal calorimetry and TGA indicated a further hydration degree in the pastes containing D and G in comparison to L, reaching heat release peaks and hydrates contents (after 28 days) up to 25% and 35% higher, respectively. The SCCs containing D and G reached compressive strength, splitting tensile strength and modulus of elasticity respectively of 60.5 MPa, 6.1 MPa and 39.9 GPa. These values were up to 10%, 16% and 16% higher than those of the L-containing SCCs, respectively. Finally, the use of the quarry powders decreased the cement consumptions to achieve 1 MPa by up to 35% in comparison to the reference SCC (from 9.8 kg/m3.MPa for the reference to 6.3 kg/m3.MPa for D2-SCC). Overall, diabase and gneiss powders can be used as alternative fillers for the production of SCCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Utilisation of high volumes of limestone quarry wastes in concrete industry (self-compacting concrete case)10.1016/j.resconrec.2006.12.004 ↗
2. ASTM C33, Standard Specification for Concrete Aggregates, ASTM Int. I, 2003 11. http://dx.doi.org/10.1520/C0033.10.1520/C0033 ↗
3. ABNT NBR NM 46, Agregados - Determinação do material fino que passa através da peneira 75 um, por lavagem, ABNT Cat., 2003.
4. Reusing of marble and granite powders in self-compacting concrete for sustainable development10.1016/j.jclepro.2016.02.044 ↗
5. Evaluation of fine limestone quarry by-products, for the production of building elements - an experimental approach10.1016/j.conbuildmat.2011.05.011 ↗
6. Exploitation and Use of Quarry Fines
7. Discovering the lost aggregate opportunity
8. Granite quarry waste as a future eco-efficient supplementary cementitious material (SCM): scientific and technical considerations10.1016/j.jclepro.2017.02.048 ↗
9. Workability, testing, and performance of self-consolidating concrete
10. Ecological, fresh state and long-term mechanical properties of high-volume fly ash high-performance self-compacting concrete10.1016/j.conbuildmat.2019.01.074 ↗
11. The use of quarry dust for SCC applications10.1016/S0008-8846(01)00726-8 ↗
12. Influence of limestone powder used as filler in SCC on hydration and microstructure of cement pastes10.1016/j.cemconcomp.2006.09.003 ↗
13. Rheology and setting of high volume fly ash mixtures10.1016/j.cemconcomp.2010.01.008 ↗
14. Effect of natural pozzolana and marble powder on the properties of self-compacting concrete10.1016/j.conbuildmat.2011.12.109 ↗
15. Self-compacting concrete incorporating filler additives: performance at high temperatures10.1016/j.conbuildmat.2011.06.077 ↗
16. Mechanical properties of self-compacting concrete incorporating quarry dust powder, silica fume or fly ash10.1016/j.conbuildmat.2011.06.056 ↗
17. Re-use of waste marble dust in the production of cement and concrete10.1016/j.conbuildmat.2013.09.005 ↗
18. Incorporation of fillers from marble and tile wastes in the composition of self-compacting concretes10.1016/j.conbuildmat.2015.04.052 ↗
19. Granitic quarry sludge waste in mortar: Effect on strength and durability10.1016/j.conbuildmat.2013.05.098 ↗
20. Evaluation of fresh cement pastes containing quarry by-product powders10.1016/j.conbuildmat.2016.12.056 ↗
21. ABNT NBR 16697
22. ASTM C150, Standard Specification for Portland Cement, ASTM Int. 552 (2015) 1–9. http://dx.doi.org/10.1520/C0150.10.1520/C0150 ↗
23. ASTM C494, Standard Specification for Chemical Admixtures for Concrete, ASTM Int. (2015) 1–9. http://dx.doi.org/10.1520/C0494.
24. EFNARC, The European Guidelines for Self-Compacting Concrete, 2005.
25. ASTM C192, Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory, ASTM Int. (2015) 1–8. http://dx.doi.org./10.1520/C0192.
26. ASTM C1738/C1738M-19, Standard Practice for High-Shear Mixing of Hydraulic Cement Pastes, (1995) 1–3. http://dx.doi.org/10.1520/C1738-13.2.
27. Imaging indices for quantification of shape, angularity, and surface texture of aggregates10.3141/1721-07 ↗
28. ASTM C1611, Standard Test Method for Slump Flow of Self-Consolidating Concrete, Annu. B. ASTM Stand. (2011) 1–6. http://dx.doi.org/10.1520/C1611.
29. ASTM C1621, C 1621M-09b Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring, Annu. B. ASTM Stand. i (2014) 5. http://dx.doi.org/10.1520/C1621.
30. Shear thickening intensity of self-compacting concretes containing rounded lightweight aggregates10.1016/j.conbuildmat.2015.01.012 ↗
31. Avoiding inaccurate interpretations of rheological measurements for cement-based materials10.1016/j.cemconres.2015.05.003 ↗
32. Fresh self compacting concrete, a shear thickening material10.1016/j.cemconres.2008.02.008 ↗
33. ASTM , Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM Int. (2015) 1–7. http://dx.doi.org/10.1520/C0039.
34. ASTM , Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete, (2013) 1–5. http://dx.doi.org/10.1520/C0469.10.1520/C0469 ↗
35. ASTM , Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, 83 (2011) 1–5. http://dx.doi.org/10.1520/C0496.
36. Use of porcelain polishing residue as a supplementary cimentitious material in self-compacting concrete10.1016/j.conbuildmat.2018.10.228 ↗
37. Efficient self-compacting concrete with low cement consumption10.1016/j.jclepro.2017.12.084 ↗
38. Computations of particle surface characteristics using optical and X-ray CT images10.1016/j.commatsci.2005.01.010 ↗
39. The rheology of fresh cement and concrete – a review
40. Characterizing minus no.200 fine aggregate for performance in concrete
41. Correlating permanent deformation characteristics of hot mix asphalt with aggregate geometric irregularities10.1520/JTE12299J ↗
42. A new approach to the characterisation of particle shape and surface properties of powders employed in concrete industry10.1016/j.conbuildmat.2008.06.006 ↗
43. EFNARC, Specification and Guidelines for Self-Compacting Concrete, 2002. doi:0 9539733 4 4
44. Limestone and silica powder replacements for cement: Early-age performance10.1016/j.cemconcomp.2017.01.001 ↗
45. Fresh concrete : a HerscheI-Bulkley material10.1007/BF02480474 ↗
46. Evaluating the distance between particles in fresh cement paste based on the yield stress and particle size10.1016/j.conbuildmat.2017.03.055 ↗
47. Fillers to lessen shear thickening of cement powder paste10.1016/j.conbuildmat.2017.03.076 ↗
48. Analytical models for estimating yield stress of high-performance pseudoplastic grout10.1016/S0008-8846(01)00476-8 ↗
49. Rheological behavior of Portland cement pastes and self-compacting concretes containing porcelain polishing residue10.1016/j.conbuildmat.2018.04.212 ↗
50. Reactivity of fly ash in cement paste studied by means of thermogravimetry and isothermal calorimetry10.1007/s10973-007-8787-z ↗
51. Evaluating the hydration of high volume fly ash mixtures using chemically inert fillers10.1016/j.conbuildmat.2017.11.132 ↗
52. Understanding the filler effect on the nucleation and growth of C-S-H10.1111/jace.13177 ↗
53. Mineral admixtures in mortars. Effect of inert materials on short-term hydration10.1016/S0008-8846(03)00183-2 ↗
54. Effect of silica fume and fly ash on heat of hydration of Portland cement10.1016/S0008-8846(02)00742-1 ↗
55. Cement and Concrete Research The in fluence of fly ash on the hydration of OPC within the first 44 h — a quantitative in situ XRD and heat flow calorimetry study10.1016/j.cemconres.2013.11.013 ↗
56. Cement and Concrete Research The effect of water-to-cement ratio on the hydration kinetics of tricalcium silicate cements: testing the two-step hydration hypothesis10.1016/j.cemconres.2012.05.009 ↗
57. H.F.W. Taylor, Cement chemistry, 2a, Thomas Telford Publishing, London, 1997.
58. High-performance concrete with recycled stone slurry10.1016/j.cemconres.2006.11.003 ↗
59. Pumice powder as filler of self-compacting concrete10.1016/j.conbuildmat.2015.08.040 ↗
60. Effects of marble sludge incorporation on the properties of cement composites and concrete paving blocks10.1016/j.jclepro.2015.07.023 ↗
61. Splitting tensile strength and modulus of elasticity of self-compacting concrete10.1016/j.conbuildmat.2010.06.037 ↗
62. Zhang · 2017
63. American Association of State Highway and Transportation Officials, Standard Specifications for Highway Bridges, 2002.