journal article·2019-11

Mechanical experiment evaluation of the microvascular self-healing capability of bitumen using hollow fibers containing oily rejuvenator

Yan-Dong Guo, Xin-Ming Xie, Jun-Feng Su, Ru Mu, Xian-Feng Wang, Hu-Ping Jin, Yuan Fang, Zhu Ding, Le-Yang Lv, Ning-Xu Han

Publisher page

Abstract

Abstract Smart microvascular self-healing bituminous composites are considered a promising approach to prolong pavement service life. The objective of this work was to investigate the microvascular self-healing capability of bituminous material by using hollow fibers with oily rejuvenator through a direct-tension mechanical experiment. The hollow fibers with oily rejuvenator were prepared using a wet-spinning approach by applying polyvinylidene fluoride material. The fixed-length hollow fibers with sealed ends were mixed in bitumen to form composite samples. Through a repetitive tensile method, the tension strength data were used to calculate the self-healing efficiency autonomously by considering crack closure and healing at various healing temperatures and times. The scanning-electron-microscope morphology showed that the polyvinylidene fluoride hollow fibers had a tight interfacial structure with bituminous material without debonding. X-ray computed tomography results indicated that the fibers were distributed homogeneously in bitumen. The fiber content and fiber orientation affected the self-healing capability of bituminous samples at 0 °C. To simplify the influence of the above two factors of the fibers, only one fiber was placed in bitumen samples parallel to the tension direction. With an increase in temperature from 0 to 30 °C, the self-healing capability of the bitumen samples increased dramatically. This phenomenon is attributed to the accelerated penetration speed of rejuvenator in the bitumen. An increase in time increased the self-healing capability of the bitumen samples. The rejuvenator may have sufficient time to leak from the hollow fibers and penetrate the bitumen. The results provide a guide to the microstructural design of the vascular fibers and the application of hollow fibers in self-healing asphalt pavement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Polymer composites and self-healing · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Autonomic healing of polymer composites10.1038/35057232 ↗
2. Self-healing polymeric composite material design, failure analysis and future10.3390/polym9100535 ↗
3. Synthesis and physicochemical properties of novel high compact microcapsules containing rejuvenator applied in asphalt10.1016/j.cej.2012.05.094 ↗
4. Fabrication and characterization of self-healing microcapsules containing bituminous rejuvenator by a nano-inorganic/organic hybrid method10.1016/j.conbuildmat.2016.06.021 ↗
5. J.F. Su, E. Schlangen, Self-healing bitumen by microcapsules containing rejuvenator, in 4th International Conference on Self-Healing Materials, Ghent 2013.
6. Induction heating of electrically conductive porous asphalt concrete10.1016/j.conbuildmat.2009.12.019 ↗
7. Design and construction of methylation melamine-formaldehyde microcapsules containing rejuvenator for asphalt10.1016/j.powtec.2012.11.013 ↗
8. Investigation the self-healing mechanism of aged bitumen using microcapsules containing rejuvenator10.1016/j.conbuildmat.2015.03.088 ↗
9. Experimental investigation and mechanism analysis of novel multi-self-healing behaviors of bitumen using microcapsules containing rejuvenator10.1016/j.conbuildmat.2015.12.120 ↗
10. Experimental investigation of self-healing behavior of bitumen/microcapsule composites by a modified beam on elastic foundation method10.1617/s11527-014-0466-5 ↗
11. Self-healing characteristics of bituminous mastics using a modified direct tension test10.1177/1045389X12467515 ↗
12. Investigation the possibility of a new approach of using microcapsules containing waste cooking oil: in situ rejuvenation for aged bitumen10.1016/j.conbuildmat.2014.10.018 ↗
13. Novel vascular self-nourishing and self-healing hollow fibers containing oily rejuvenator for aged bituminous materials10.1016/j.conbuildmat.2018.06.181 ↗
14. The compartmented alginate fibres optimisation for bitumen rejuvenator encapsulation
15. The reinforcement and healing of asphalt mastic mixtures by rejuvenator encapsulation in alginate compartmented fibres10.1088/0964-1726/25/8/084003 ↗
16. Investigating the self healing capability of bituminous binders10.1080/14680629.2009.9690237 ↗
17. Comparison of two beam fatigue tests10.1520/JTE20130226 ↗
18. Evaluating laboratory compaction of asphalt mixtures using the shear box compactor10.1520/JTE20120070 ↗
19. Fabrication and characterization of novel electrothermal self-healing microcapsules with graphene/polymer hybrid shells for bituminous material10.3390/nano8060419 ↗
20. Investigation of the self-healing behaviors of bitumen/microcapsules composites by a repetitive direct tension test10.3390/ma9070600 ↗
21. FRP strengthened RC beams. I: review of debonding strength models10.1016/S0141-0296(01)00105-5 ↗
22. Characterization of fiber/matrix interface strength: applicability of different tests, approaches and parameters10.1016/j.compscitech.2004.07.003 ↗
23. Experimental observation of the self-healing microcapsules containing rejuvenator states in asphalt binder10.1016/j.conbuildmat.2017.04.190 ↗
24. Influence of fibre orientation on pultruded GFRP material properties10.1016/j.compstruct.2018.07.104 ↗
25. Design of self-healing microcapsules containing bituminous rejuvenator with nano-CaCO3/organic composite shell: mechanical properties, thermal stability and compactability10.1002/pc.24343 ↗
26. J.F. Su, Y.Y. Wang, S. Han, Self-healing bitumen using biomimetic capillaries of hollow fibers: fabrication, microstructure and properties, in 6th International Conference on Self-Healing Materials, 2017.
27. Identification of mechanical parameters of urea-formaldehyde microcapsules using finite-element method10.1016/j.compositesb.2018.09.052 ↗