Influence of the Si/Al ratio in geopolymers on the stability against acidic attack and the immobilization of Pb2+ and Zn2+
Source abstract
Abstract
Abstract In this research article the influence of the Si/Al ratio in geopolymers was investigated. Samples with a ratio varying between 2.0 and 3.0 were prepared. Furthermore, the lead and zinc inclusion in the geopolymer matrix depending on the Si/Al ratio was analyzed. Therefore, water soluble Pb(NO3)2 and Zn(NO3)2 were added to the geopolymer in a 5% weight percentage. The geopolymers were examined using IR spectroscopy, XRD and SEM. Moreover, leaching experiments in 1M sulfuric acid and 3M hydrochloric acid were carried out in a static leaching method over a period of 28 days. The eluates were analyzed using ICP-OES and the residues of the geopolymers were again examined using the described analytical methods. The effectiveness of geopolymers immobilizing heavy metals is dependent on the Si/Al ratio. Moreover, the structural differences in these geopolymers were proven to influence the stability against acidic attack.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Geopolymers: inorganic polymeric new materials10.1007/BF01912193 ↗
2. Geopolymer foams by gelcasting10.1016/j.ceramint.2013.11.011 ↗
3. Geopolymerisation: a review and prospects for the minerals industry10.1016/j.mineng.2007.07.011 ↗
4. Reaction mechanisms in the geopolymeric conversion of inorganic waste to useful products10.1016/j.jhazmat.2006.02.044 ↗
5. The geopolymerisation of alumino-silicate minerals10.1016/S0301-7516(99)00074-5 ↗
6. Consolidation of silica sand slime with a geopolymer binder at room temperature and the strength of the monoliths
7. Mechanism of geopolymerization and factors influencing its development: a review10.1007/s10853-006-0401-4 ↗
8. Chemically-bonded cementitious materials based on metakaolin, British ceramic
9. The potential use of geopolymerci materials to immobilise toxic metals10.1016/S0892-6875(97)00046-0 ↗
10. Compressive strength and microstructural characteristics of class C fly ash geopolymer10.1016/j.cemconcomp.2009.11.003 ↗
11. Geopolymers for immobilization of Cr6+, Cd2+, and Pb2+10.1016/j.jhazmat.2008.01.053 ↗
12. Resistance of geopolymer materials to acid attack10.1016/j.cemconres.2004.06.005 ↗
13. Static and dynamic leaching experiments of heavy metals from fly ash-based geopolymers10.1007/s11595-013-0797-z ↗
14. Characterisation of class F fly ash geopolymer pastes immersed in acid and alkaline solutions10.1016/j.cemconcomp.2011.08.008 ↗
15. Ali ALLAHVERDI · Nitric acid attack on hardened paste of geopolymeric cements, ceramics – silikaty · 2001 · 45 · 143
16. Quantitative determination of phases in the alkali activation of fly ash. Part I. Potential ash reactivity10.1016/j.fuel.2005.08.014 ↗
17. Quantitative determination of phases in the alkaline activation of fly ash. Part II: Degree of reaction10.1016/j.fuel.2006.04.006 ↗
18. Alkaline activation of metakaolin: effect of calcium hydroxide in the products of reaction10.1111/j.1151-2916.2002.tb00070.x ↗
19. Alkaline activation of fly ashes: NMR study of the reaction products10.1111/j.1551-2916.2004.01141.x ↗
20. Rees · 2007
21. Infrared Spectroscopy of Lead and Alkaline-Earth Alumosilicate Glasses10.1111/j.1151-2916.1990.tb05124.x ↗
22. CO2 inclusion bands in i.r. spectra of KBr pellets10.1016/0584-8539(80)80181-4 ↗
23. Use of infrared spectroscopy to study geopolymerization of heterogeneous amorphous aluminosilicates10.1021/la026127e ↗
24. Synthesis and characterisation of materials based on inorganic polymers of alumina and silica: sodium polysialate polymers10.1016/S1466-6049(00)00041-6 ↗
25. Atomic vibrations in vitreous silica10.1039/df9705000055 ↗
26. Acid resistance of inorganic polymer binders. 1. Corrosion rate10.1617/s11527-011-9744-7 ↗