Magnesium induced hydration kinetics of ultra-high performance concrete (UHPC) served in marine environment: Experiments and modelling
Source abstract
Abstract
Abstract In this study, magnesium induced hydration kinetics of ultra-high performance concrete (UHPC) served in marine environment are studied based on practical experiments and modelling. XRD quantitative analysis and TG-DSC test are employed to clarify the impact of magnesium ions on cement hydration. GEMS modelling is used to verify the influence of magnesium ions on cement hydration. The obtained results reveal that magnesium delays formation of AFt, Ca(OH)2 and decomposition of Friedel’s salt during early age. The influence of magnesium during early ages can be equivalent to decrease on specific area of cement based on modelling. In later age, magnesium induces accelerated cement hydration and promoted generations on AFt, Ca(OH)2. Supposing that the inhibition and acceleration effect is brought by formation of magnesium corrosion products, mathematical analysis model on behaviors of magnesium corrosion products in UHPC system is developed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (89)
Show source-provided references
1. P.E. Bach, Marine Transportation Projects Use Innovative Construction Techniques, Iabse Congress Report. 16 (2000) 965-971.10.2749/222137900796297969 ↗
2. M.D. Spalding, I. Meliane, A. Milam, C. Fitzgerald, L.Z. Hale, Protecting Marine Spaces: Global Targets and Changing Approaches, Ocean Yearbook Online. 27 (2013) 213-248.10.1163/22116001-90000160 ↗
3. M.G. Alexander, Marine Concrete Structures: Design, Durability and Performance, 2016, pp. 199–458.
4. Review on construction technology of tunnel and artificial islands for Hong Kong-Zhuhai-Macao Bridge
5. Impact of coastal construction on coral reefs in the US-affiliated pacific Islands10.1080/08920759309362207 ↗
6. Insularity, Insularity, sovereignty and statehood: the representation of islands on portolan charts and the construction of the territorial state10.1111/j.0435-3684.2005.00197.x ↗
7. Impact of a marina construction on a seagrass bed at Lanzarote (Canary Islands)10.1652/1400-0350(2002)008[0157:IOAMCO]2.0.CO;2 ↗
8. Mechanical properties and microstructure of Portland cement concrete prepared with coral reef sand10.1007/s11595-016-1481-x ↗
9. Smart construction site in mega construction projects: a case study on island tunneling project of Hong Kong-Zhuhai-Macao Bridge
10. Combined effects of saltwater and water flow on deterioration of concrete under freeze-thaw cycles10.1061/(ASCE)CR.1943-5495.0000029 ↗
11. Analyses and calculation of solar radiation over northern south china sea
12. The combined action of Mg2+ and Cl− ions in cement pastes10.1016/0008-8846(85)90057-2 ↗
13. Effect of magnesium and sulfate ions on durability of silica fume blended mixes exposed to the seawater tidal zone10.1016/j.cemconres.2004.09.028 ↗
14. Effects of mineral and chemical admixtures on high-strength concrete in seawater10.1016/S0008-8846(01)00687-1 ↗
15. Microstructural and microanalytical studies of sulfate attack. V. Comparison of different slag blends10.1016/0008-8846(96)00090-7 ↗
16. Reinforcing steel passivation in mortar and pore solution10.1016/j.cemconres.2007.04.005 ↗
17. Use of gypsum/brucite mixed precipitate instead of gypsum in Portland cement10.1002/jctb.1199 ↗
18. Effect of magnesium on the C-S-H nanostructure evolution and aluminate phases transition in cement-slag blend10.1007/s11595-018-1794-z ↗
19. Effect of magnesium chloride (MgCl2) on ordinary Portland cement concrete10.17485/ijst/2011/v4i6.2 ↗
20. Role of chloride ions on expansion and strength reduction in plain and blended cements in sulfate environments10.1016/0950-0618(95)92857-D ↗
21. The interaction of magnesium in hydration of C3S and CSH formation using 29 Si MAS-NMR10.1007/s10853-008-2889-2 ↗
22. The stability of bound chlorides in cement paste with sulfate attack10.1016/j.cemconres.2014.11.010 ↗
23. Magnesium sulfate attack on hardened blended cement pastes under different circumstances10.1016/S0008-8846(02)00801-3 ↗
24. Paragenesis of 11 Å tobermorite and poorly crystalline hydrated magnesium silicate10.1016/0008-8846(73)90062-8 ↗
25. Effect of different types of fibers on the microstructure and the mechanical behavior of Ultra-High Performance Fiber-Reinforced Concretes10.1016/j.compositesb.2015.09.059 ↗
26. Microstructural investigation of innovative UHPC10.1016/S0008-8846(98)00225-7 ↗
27. Sustainable development of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC): Towards to an optimized concrete matrix and efficient fibre application10.1016/j.jclepro.2017.06.017 ↗
28. Advanced mechanical properties and frost damage resistance of ultra-high performance fibre reinforced concrete10.1016/j.conbuildmat.2016.09.012 ↗
29. K. Kono, H. Musha, T. Kawaguchi, et al., Durability study of the first PC bridge constructed with ultra-high strength fiber reinforced concrete in Japan, in: Proceedings of the RILEM-fib-AFGC International Symposium on Ultra-High Performance Fibre-Reinforced Concrete. Oct. 2013, Marseille, France, 2013, pp. 239–248.
30. Possibility of sea water as mixing water in concrete
31. Suitability of sea water for mixing structural concrete exposed to a marine environment10.1016/0958-9465(95)00015-5 ↗
32. Some considerations for applicability of seawater as mixing water in concrete10.1061/(ASCE)MT.1943-5533.0001006 ↗
33. https://www.statista.com/statistics/219343/cement-production-worldwide/.
34. Effect of seawater as mixing water on the mechanical properties of mortar and concrete
35. Characteristics of treated effluents and their potential applications for producing concrete10.1016/j.jenvman.2012.05.019 ↗
36. A. Younis, U. Ebead, A. Nanni, Applicability of using seawater accompanied by FRP reinforcement in concrete structure: a perspective, International Structural Engineering and Construction Conference, 2017.10.14455/ISEC.res.2017.159 ↗
37. Durability and microstructure of coral sand concrete incorporating supplementary cementitious materials10.1016/j.conbuildmat.2018.03.082 ↗
38. Development of UHPC mixtures from an ecological point of view10.1016/j.conbuildmat.2013.12.102 ↗
39. Emergy evaluation of the marine sand extraction for aggregate supply for the construction of the pusan new port in Korea10.1007/s12205-011-1118-8 ↗
40. R.L. Henry, D.F. Griffin, The effect of salt in concrete on compressive strength, water vapor transmission, and corrosion of reinforcing steel (No. NCEL-TR-217), Naval Civil Engineering Lab Port Hueneme CA, 2006.
41. Use of sea-sand and seawater in concrete construction: current status and future opportunities10.1016/j.conbuildmat.2017.08.130 ↗
42. The influence of salt water on the compressive strength of concrete
43. W.J. McCoy, Water for mixing and curing concrete. In Significance of Test and Properties of Concrete and Concrete Aggregates, ASTM STP. 169 (1956) 352-357.
44. Magnetic susceptibility measurements on metakaolin admixtured cement hydrated with ground water and sea water10.1016/S1674-4799(09)60063-7 ↗
45. Effects of triisopropanol amine, sodium chloride and limestone on the compressive strength and hydration of Portland cement10.1016/j.conbuildmat.2016.08.030 ↗
46. D. Dobiã¡Å¡, R. Pernicovã¡, Diffusion of chloride ions in ultra-high performance concrete, Adv. Mater. Res. 1106 (2015) 21–24.10.4028/www.scientific.net/AMR.1106.21 ↗
47. Water transport properties and depth of chloride penetration in ultra high performance concrete10.4028/www.scientific.net/KEM.711.137 ↗
48. The effect of nanosilica addition on flowability, strength and transport properties of ultra-high performance concrete10.1016/j.matdes.2014.02.051 ↗
49. Chloride-ion induced corrosion of galvanized and ordinary steel reinforcement in high-performance concrete10.1016/S0008-8846(98)00090-8 ↗
50. Effect of chloride content on mechanical properties of ultra high performance concrete10.1016/j.cemconcomp.2017.09.006 ↗
51. Evaluation of chloride penetration in high performance concrete using neural network algorithm and micro pore structure10.1016/j.cemconres.2009.05.013 ↗
52. Durability of an Ultra High Performance Fiber Reinforced Concrete (UHPFRC) under progressive aging10.1016/j.cemconres.2013.09.008 ↗
53. Aspects of the pore solution chemistry of blended cements related to the control of alkali silica reaction10.1016/0008-8846(87)90046-9 ↗
54. Solubility product constant, Ksp
55. Tailing pond remediation in the Canadian Arctic10.1080/09593331708616480 ↗
56. Structural characterization of magnesium silicate hydrate: towards the design of eco-sustainable cements10.1039/C5DT03545G ↗
57. Durability of very high-volume fly ash cement pastes and mortars in aggressive solutions10.1016/j.cemconcomp.2013.03.001 ↗
58. Resistance to chemical attack of ground brick–PC mortar: Part II. Synthetic seawater10.1016/S0008-8846(00)00245-3 ↗
59. The influence of alkali-free and alkaline shotcrete accelerators within cement systems: influence of the temperature on the sulfate attack mechanisms and damage10.1016/S0008-8846(02)00967-5 ↗
60. Petrographic evidence of calcium oxychloride formation in mortars exposed to magnesium chloride solution10.1016/j.cemconres.2006.05.022 ↗
61. Standard Practice for the Preparation of Substitute Ocean Water, ASTM D1141, 2008.
62. Test Specifications of Hydraulic Concrete, SL352-2006 China Water Power Press, 2006. (in Chinese).
63. Characterization of high-calcium fly ashes and their potential influence on ettringite formation in cementitious systems10.1520/CCA10512J ↗
64. Phase changes during the early hydration of Portland cement with Ca-lignosulfonates10.1016/j.cemconres.2014.12.004 ↗
65. Effect of temperature on the hydration of Portland cement blended with siliceous fly ash10.1016/j.cemconres.2013.07.006 ↗
66. The impact of sulphate and magnesium on chloride binding in Portland cement paste10.1016/j.cemconres.2014.07.007 ↗
67. Influence of limestone on the hydration of Portland cements10.1016/j.cemconres.2008.01.002 ↗
68. L.J. Parrot, D.C. Killoh, Prediction of Cement Hydration, 1984.
69. Thermodynamic modelling of the effect of temperature on the hydration and porosity of Portland cement10.1016/j.cemconres.2007.08.017 ↗
70. GEM-Selektor geochemical modeling package: revised algorithm and GEMS3K;numerical kernel for coupled simulation codes
71. Hydration of a silica fume blended low-alkali shotcrete cement10.1016/j.pce.2013.09.007 ↗
72. Hydration mechanisms of ternary Portland cements containing limestone powder and fly ash10.1016/j.cemconres.2010.11.014 ↗
73. Chloride binding capacity and binding isotherms of opc pastes and mortars10.1016/0008-8846(93)90089-R ↗
74. Friedel’s salt, Ca 2 Al(OH) 6 (Cl, OH)·2H 2 O: its solid solutions and their role in chloride binding10.1016/S0008-8846(98)00162-8 ↗
75. Structural transition of Friedel’s salt 3CaO·AlO·CaCl·10HO studied by synchrotron powder diffraction10.1016/S0008-8846(01)00716-5 ↗
76. Friedel’s salt profiles from thermogravimetric analysis and thermodynamic modelling of Portland cement-based mortars exposed to sodium chloride solution10.1016/j.cemconcomp.2017.01.002 ↗
77. Chloride-induced corrosion behavior of reinforcing steel in spent fluid cracking catalyst modified mortars10.1016/j.cemconres.2013.01.011 ↗
78. Effect of temperature on the hydration of ordinary Portland cement in the presence of a superplasticizer10.1016/0040-6031(94)80138-X ↗
79. Effect of alkalies on portland cement hydration : I. Alkali oxides incorporated into the crystalline lattice of clinker minerals10.1016/0008-8846(83)90005-4 ↗
80. Microstructure of cement paste subject to early carbonation curing10.1016/j.cemconres.2011.09.010 ↗
81. Effect of alkalies on portland cement hydration II. Alkalies present in form of sulphates10.1016/0008-8846(83)90078-9 ↗
82. Effect of alkali on hydration process and properties of cement
83. Magnesium sulfate attack on portland cement paste-I. Microstructural analysis10.1016/0008-8846(92)90147-N ↗
84. Mix design and properties assessment of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC)10.1016/j.cemconres.2013.11.002 ↗
85. Effects of silica powder and cement type on durability of ultra-high performance concrete (UHPC)10.1016/j.cemconcomp.2015.11.005 ↗
86. Mix design and characteristics evaluation of an eco-friendly Ultra-High Performance Concrete incorporating recycled coral based materials10.1016/j.jclepro.2017.07.096 ↗
87. Use of gypsum/brucite mixed precipitate instead of gypsum in Portland cement10.1002/jctb.1199 ↗
88. Effect of magnesium on the C-S-H nanostructure evolution and aluminate phases transition in cement-slag blend10.1007/s11595-018-1794-z ↗
89. Hydration and setting time of MgO-type expansive cement10.1016/0008-8846(92)90129-J ↗