Experimental analysis of the size effect on the compressive behaviour of cylindrical samples core-drilled from existing brick masonry
Source abstract
Abstract
This paper presents the results of an experimental programme about the evaluation of the size effect on the compressive behaviour of cylindrical samples of existing masonry. The study focuses on the in-situ coring and experimental testing of core specimens with 150 mm and 90 mm diameter. The 150 mm cylinder, recurrent in minor destructive evaluation of the compressive strength of existing masonry, includes four brick pieces, two mortar beds and one head joint. The 90 mm specimen includes one mortar bed and two segments of brick, and inflicts less damage on the inspected structural member due to its lower invasivity. The experimental research investigates the size effect on four different types of clay brick masonry. The first type was built in the laboratory using historical-like materials. The other three types of masonry belong to structural walls of existing historical buildings. The combination of experimental results from laboratory controlled materials and existing historical members shows that the size of the cylindrical specimen has regular effect on the compressive strength and the Young’s modulus. The consistent relationship found between the compressive strengths of the 150 mm and 90 mm core samples allows the use of the latter specimen for a more respectful inspection of existing structural masonry.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Masonry and Concrete Structural Analysis · Building materials and conservation · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. UIC, Leaflet 778-3R: Recommendations for the inspection, assessment and maintenance of masonry arch bridges, 1995.
2. Compressive strength of solid clay brick masonry: calibration of experimental tests and theoretical issues
3. Experimental identification of a multi-span masonry bridge: the Tanaro Bridge10.1016/j.conbuildmat.2007.07.031 ↗
4. Compressive strength of brick masonry in existing buildings — research on samples cut from the structures
5. Mechanical characterization of historical masonry by core drilling and testing of cylindrical samples
6. Compression test of masonry core samples extracted from existing brickwork10.1016/j.conbuildmat.2016.05.057 ↗
7. Complete experimental characterization of lime mortar and clay brick masonry
8. Comparison between experimental methods for evaluating the compressive strength of existing masonry buildings10.1016/j.conbuildmat.2014.06.070 ↗
9. Experimental research of masonry compressive strength in the Auschwitz II – Birkenau former death camp buildings10.1016/j.engfailanal.2016.06.007 ↗
10. Size dependence of strength and fracture properties of brick masonry walls
11. P.B. Lourenço, Two aspects related to the analysis of masonry structures: size effect and parameter sensitivity, Report n 03.21.1.31.25, 1997.
12. European Committee for Standardization (CEN), EN 772-1:2011, Methods of Test for Masonry Units – Part 1: Determination of Compressive Strength, 2011.
13. European Committee for Standardization (CEN), EN 459-1 Building lime – Part 1: Definitions, specifications and conformity criteria, 2010.
14. Deutsches Institut für Normung (DIN), DIN 18555-9: Testing of mortar containing mineral binders – Part 9: Determining the compressive strength of hardened mortar, 1999.
15. Combining Brazilian Tests on masonry cores and Double Punch Tests for the mechanical characterization of historical mortars10.1016/j.conbuildmat.2016.02.168 ↗
16. Experimental evaluation of the shear strength of aerial lime mortar brickwork by standard tests on triplets and non-standard tests on core samples10.1016/j.engstruct.2017.01.028 ↗
17. Combined in-situ and laboratory minor destructive testing of historical mortars10.1080/15583058.2017.1323247 ↗
18. European Committee for Standardization (CEN), EN 14580 Natural stone test methods. Determination of static elastic modulus, 2006.
19. American Society for Testing and Materials, ASTM E111 Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus 1, 2010.
20. European Committee for Standardization (CEN), EN 12390-13 Testing hardened concrete – Part 13: Determination of secant modulus of elasticity in compression, 2013.
21. American Society for Testing and Materials, ASTM C 469-02 Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression, 2002.
22. Compressive strength and elasticity of pure lime mortar masonry10.1617/s11527-015-0553-2 ↗
23. Literature review on the assessment of masonry properties by tests on core samples
24. Hendry · 1998
25. Como · 2013
26. Monotonic and cyclic testing of clay brick and lime mortar masonry in compression10.1016/j.conbuildmat.2018.10.198 ↗
27. European Committee for Standardization (CEN), EN 1052-1 Methods of test for masonry – Part 1: Determination of compressive strength, 1999.
28. American Society for Testing and Materials, ASTM C1314-09 Standard Test Method for Compressive Strength of Masonry Prisms, 2009.
29. Earthquake-resistant Design of Masonry Buildings
30. Numerical prediction of the behavior, strength and elasticity of masonry in compression10.1016/j.engstruct.2015.02.011 ↗
31. Equivalent elastic moduli for brick masonry10.1016/0266-352X(89)90045-1 ↗
32. The effect of scale on the structural behaviour of masonry under compression10.1016/j.conbuildmat.2010.06.025 ↗
33. Experimental study on scale effects in clay brick masonry prisms and wall panels investigating compression and shear related properties10.1016/j.conbuildmat.2017.12.149 ↗
34. Use of EC6-like equations to estimate the compressive strength of masonry made of solid clay bricks and lime mortar
35. Estimation of solid clay brick unreinforced masonry compressive strength based on mortar and unit mechanical parameters
36. Non-standard testing of mechanical characteristics of historic mortars10.1080/15583051003717788 ↗
37. European Committee for Standardization (CEN), EN 1015-11 Methods of test for mortar for masonry – Part 11: Determination of flexural and compressive strength of hardened mortar, 1999.
38. ACI, ASCE, TMS, Commentary on Specification for Masonry Structures (ACI 530.1-02/ASCE 6-02/TMS 602-02), (2004).
39. European Committee for Standardization (CEN), Eurocode 6: Design of masonry structures – Part 1: General rules for reinforced and unreinforced masonry structures, 2005.