Fabrication of solvent-free asphalt emulsion prime with high penetrative ability
Source abstract
Abstract
Abstract Solvent-free asphalt emulsion is preferred as the prime coat in pavement engineering. However, the solvent-free asphalt emulsion usually has quite poor penetrative ability. To fabricate solvent-free asphalt emulsion with high penetrative ability, several asphalt emulsions were fabricated by changing the composition parameters including emulsifier, asphalt, and wetting agent, which may affect the particle size of asphalt droplets and the viscosity and wetting ability of emulsion. Then, the penetrative ability of these emulsions into a typical material for the base layer as well as the corresponding mechanisms were investigated by conducting the tests of penetration depth, contact angle and particle size distribution. Results indicate that the addition of wetting agent (JFC, a fatty alcohol-polyoxyethylene ether) can greatly increase the penetration depth of asphalt emulsion because it can sharply increase the wetting ability of asphalt emulsion. The use of high emulsifier content effectively reduces the particle size of the asphalt droplets, thus greatly improving the penetrative ability of asphalt emulsion. Besides, when asphalt emulsion with high emulsifier content is diluted to a constant asphalt content, moderately increasing asphalt content in production can narrow the particle size distribution of asphalt droplets and enhance the penetrative ability of asphalt emulsion. In general, when high emulsifier content, relative high asphalt content in production, and wetting agent are all employed during the fabrication process, the asphalt emulsion can have both a good penetrative ability and bonding ability at normal asphalt content.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Polymer Nanocomposites and Properties · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Development of a solvent-free asphalt emulsion for prime coats and granular sealing
2. Ministry of Transport of the People’s Republic of China, JTG F40–2004: Technical Specifications for construction of highway asphalt pavements, China Communications Press, Beijing, 2004 (in Chinese).
3. A. Elkadri, A. Acheson, T. Zanini, et al., Bio-Solvents in the Production of Emulsified Prime Coat Systems, in: Proceedings of the fifty-eight annual conference of the Canadian Technical Asphalt Association (CTAA): St. John's, Newfoundland and Labrador, November 2013.
4. T.J. Freeman, J.W. Button, C.K. Estakhri, Effective prime coats for compacted pavement bases, No. FHWA/TX-10/0-5635-1, Texas Transportation Institute, 2010.
5. Development and application of high cohesiveness prime coat on cement-stabilized macadam base
6. The practice and understanding of high-penetration technology for emulsified asphalt
7. J.V. Martin, J.M. Hemsley, Asphalt emulsion priming compositions and methods of use. U.S. Patent No. 8167993, 1 May 2012.
8. G. King, R. May, New approaches to tack application, in: The 83rd Annual Meeting of the Transportation Research Board, Washington, D.C., 2003.
9. Overview of asphalt emulsion applications in North America
10. Engineering properties of prime coats applied to a granular base10.1520/JTE20120292 ↗
11. Prime coat performance evaluation based on the average particle size of emulsified asphalt
12. Overview of asphalt emulsions
13. Kinetics of wetting and spreading by aqueous surfactant solutions10.1016/j.cis.2008.08.005 ↗
14. Adsorption and wetting properties of cationic, anionic and nonionic surfactants in the glass-aqueous solution of surfactant-air system10.1016/j.matchemphys.2015.05.054 ↗
15. Ministry of Transport of the People’s Republic of China, JTGD50-2006: Specifications for design of highway asphalt pavement, China communication Press, Beijing, 2006 (in Chinese).
16. EN 12849: Bitumen and bituminous binders - Determination of penetration power of bitumen emulsions, European Committee for Standardization, 2009.
17. Evaluation method of index for permeability of prime coat emulsified asphalt
18. Rheological behavior of concentrated bitumen in water emulsions10.1021/la990412p ↗
19. Research on mine dustfall agents based on the mechanism of wetting and coagulation10.1007/s12613-014-0886-9 ↗
20. The role and interaction of superplasticizer and emulsifier in fresh cement asphalt emulsion paste through rheology study10.1016/j.conbuildmat.2016.08.085 ↗
21. N. Boussad, T. Martin, Emulsifier content in water phase and particle size distribution: Two key-parameters for the management of bituminous emulsion performance, in: Proc. 1st Eurasphalt and Eurobitume Congress, Strasbourg, France, 1996, paper 6.159.
22. Influence of emulsifier content on cement hydration and mechanical performance of bitumen emulsion mortar10.1617/s11527-017-1052-4 ↗
23. Modeling mechanical properties of cement asphalt emulsion mortar with different asphalt to cement ratios and temperatures10.1061/(ASCE)MT.1943-5533.0002480 ↗
24. Effect of water content on volumetric and mechanical properties of cement bitumen emulsion mixture10.1061/(ASCE)MT.1943-5533.0002736 ↗
25. Asphalt emulsion manufacturing today and tomorrow