Integrally hydrophobic cementitious composites made with waste amorphous carbon powder
Source abstract
Abstract
Amorphous carbon powder (ACP) is a hydrophobic by-product material from refining waste materials of paraffin production factory. ACP effects on permeability and mechanical properties of cementitious composites were investigated. A range of properties of modified cement paste and concrete including hydrophobicity, workability, porosity, compressive strength, transport properties comprising sorptivity, water absorption, water desorption rate and electrical resistivity were studied. Results showed that incorporation of 15% ACP by weight of cement reduces water absorption, sorptivity and electrical conductivity of cement paste by 23%, 86% and 65%, respectively. Sorptivity and electrical conductivity of modified concrete samples by 20% ACP by weight of cement, were reduced by 60% and 30%, respectively. Adding ACP to paste samples resulted in higher compressive strength through lowering porosity. However, in the case of concrete, no significant change was observed. It was demonstrated that ACP could reduce the wettability of cementitious composites by refining the pores and altering the hydrophobicity characteristics of cementitious composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Smart Materials for Construction · Surface Modification and Superhydrophobicity · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Dyer · 2014
2. Combined effects of mineral admixtures and curing conditions on the sorptivity coefficient of concrete10.1016/S0008-8846(03)00112-1 ↗
3. Effectiveness of surface coatings in improving concrete durability10.1016/S0958-9465(02)00087-2 ↗
4. Surface treatment of reinforced concrete in marine environment: Influence on chloride diffusion coefficient and capillary water absorption10.1016/j.conbuildmat.2008.06.013 ↗
5. Durable fiber reinforced self-compacting concrete10.1016/j.cemconres.2003.07.005 ↗
6. Assessment of the durability of concrete from its permeation properties: a review10.1016/S0950-0618(00)00058-1 ↗
7. Yuan · 2013 · 3
8. Purity of the sacred lotus, or escape from contamination in biological surfaces10.1007/s004250050096 ↗
9. Investigating the BSA protein adsorption and bacterial adhesion of Al-alloy surfaces after creating a hierarchical (micro/nano) superhydrophobic structure10.1002/jbm.a.35751 ↗
10. Multiscale roughness and stability of superhydrophobic biomimetic interfaces10.1021/la062301d ↗
11. Mailvaganam · 2002
12. Influence of silane-based water repellent on the durability properties of recycled aggregate concrete10.1016/j.cemconcomp.2012.08.008 ↗
13. Comparison between surface and bulk hydrophobic treatment against corrosion of galvanized reinforcing steel in concrete10.1016/j.cemconres.2011.03.011 ↗
14. The effect of silane-based hydrophobic admixture on corrosion of galvanized reinforcing steel in concrete10.1016/j.corsci.2010.05.008 ↗
15. The effect of silane-based hydrophobic admixture on corrosion of reinforcing steel in concrete10.1016/j.cemconres.2008.06.009 ↗
16. Justnes, H., Low water permeability through hydrophobicity: COIN Project P1 advanced cementing materials: SP 1.5 F Low porosity/permeability, 2009.
17. The effect of initial moisture content on water transport in concrete containing a hydrophobic admixture10.1680/macr.2001.53.2.127 ↗
18. Dodson · 2013
19. Evaluation of capillary water absorption in rendering mortars made with powdered waterproofing additives10.1016/j.conbuildmat.2009.05.002 ↗
20. Hydrophobic concrete using waste paper sludge ash10.1016/j.cemconres.2015.01.005 ↗
21. A review of the impact of micro-and nanoparticles on freeze-thaw durability of hardened concrete: mechanism perspective10.1016/j.conbuildmat.2018.08.029 ↗
22. The effect of carbon powder addition on the properties of hematite radiation shielding concrete10.1016/j.pnucene.2008.10.002 ↗
23. Evaluating the effect of amorphous carbon powder on moisture susceptibility and mechanical resistance of asphalt mixtures10.1016/j.conbuildmat.2017.06.036 ↗
24. Rutting and fatigue performance of asphalt mixtures containing amorphous carbon as filler and binder modifier10.1016/j.conbuildmat.2018.08.179 ↗
25. Modified sessile drop method for assessing initial soil–water contact angle of sandy soil10.2136/sssaj2000.642564x ↗
26. ASTM C494/C494M-17, Standard Specification for Chemical Admixtures for Concrete, ASTM International, West Conshohocken, PA, 2017, http://www.astm.org.
27. ASTM E1621-13, Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry, ASTM International, West Conshohocken, PA, 2013, http://www.astm.org.
28. Effect of compressive strain on electrical resistivity of carbon black-filled cement-based composites10.1016/j.cemconcomp.2006.05.004 ↗
29. Experimental studies on the indoor electrical floor heating system with carbon black mortar slabs10.1016/j.enbuild.2007.10.009 ↗
30. Electromagnetic wave absorbing characteristics of carbon black cement-based composites10.1016/j.cemconcomp.2010.03.009 ↗
31. Multi-scale mechanical and fracture characteristics and early-age strain capacity of high performance carbon nanotube/cement nanocomposites10.1016/j.cemconcomp.2009.10.007 ↗
32. The influences of admixtures on the dispersion, workability, and strength of carbon nanotube–OPC paste mixtures10.1016/j.cemconcomp.2011.09.013 ↗
33. Dispersion of carbon nanotubes and its influence on the mechanical properties of the cement matrix10.1016/j.cemconcomp.2012.07.008 ↗
34. Du, Y.T., R.R. Zhao, and J.Q. Dong. Research on Conductive Property of Carbon Fiber/Carbon Black-Filled Cement-Based Composites. in Applied Mechanics and Materials. 2012. Trans Tech Publ.10.4028/www.scientific.net/AMM.182-183.144 ↗
35. ASTM C305-14, Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency, ASTM International, West Conshohocken, PA, 2014, http://www.astm.org.
36. ASTM, ASTM C143/C143M-15a, Standard Test Method for Slump of Hydraulic-Cement Concrete, ASTM International, West Conshohocken, PA, 2015
37. Influence of water-reducing admixtures on properties of cement paste—a miniature slump test10.1520/CCA10190J ↗
38. ASTM /C39M-18, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA, 2018, http://www.astm.org.
39. ASTM C597-16, Standard Test Method for Pulse Velocity Through Concrete, ASTM International, West Conshohocken, PA, 2016, http://www.astm.org.
40. Barrier performance of concrete: a review of fluid transport theory10.1007/BF02473048 ↗
41. Microstructure and transport properties of porous building materials10.1007/BF02480673 ↗
42. Electrical resistivity of concrete for durability evaluation: a review10.1155/2017/8453095 ↗
43. Relationship between concrete resistivity and corrosion rate–a literature review10.1016/j.cemconcomp.2013.03.019 ↗
44. Østvik, J.-M., Thermal aspects of corrosion of steel in concrete: effect of low temperature on the resistivity and the cathodic reaction rate, 2005.
45. Storing water in powder form by self-assembling hydrophobic silica nanoparticles10.1016/j.powtec.2006.09.006 ↗
46. Liquid marbles10.1038/35082026 ↗
47. Water absorption in cover concrete10.1007/BF02472669 ↗
48. Protection provided by surface treatments against chloride induced corrosion10.1007/BF02480469 ↗