Assessment of GFRP bond behaviour for the design of sustainable reinforced seawater concrete structures
Source abstract
Abstract
Abstract Freshwater is an increasingly scarce resource. Its use in the production of concrete is one important contributor to its fast depletion. Alternatively, the use of seawater for reinforced concrete production, combined with the use of glass fibre reinforced polymers (GFRP) as reinforcement, may represent an interesting solution to increase concrete sustainability. The objective of this paper is to explore this promising solution through the development of concrete compositions with seawater. Additionally, it is also an objective to assess the bond behaviour between GFRP rods and concrete, in a design perspective. The influence of concrete age, rod diameter and anchorage length were also investigated. An analytical model capable of determining the local bond stress-slip laws was used. Results demonstrated that the use of seawater had no relevant effects on neither concrete mechanical properties nor bond behaviour.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Rosegrant · 2002
2. I.A. Shiklomanov, World water resources. A new appraisal and assessment for the 21st century, 1998.
3. Water footprint scenarios for 2050: a global analysis10.1016/j.envint.2013.11.019 ↗
4. Four billion people facing severe water scarcity10.1126/sciadv.1500323 ↗
5. Use of sea-sand and seawater in concrete construction: current status and future opportunities10.1016/j.conbuildmat.2017.08.130 ↗
6. Effect of seawater for mixing and curing on structural concrete
7. Durability of steel reinforced concrete in chloride environments: an overview10.1016/j.conbuildmat.2011.12.038 ↗
8. Evaluation of field concrete deterioration under real conditions of seawater attack10.1016/j.conbuildmat.2016.05.014 ↗
9. Sensitivity analysis of chloride ingress models: case of concretes immersed in seawater10.1016/j.conbuildmat.2017.01.019 ↗
10. The influence of sodium and magnesium sulphate on the penetration of chlorides in mortar
11. Flexural behaviour of GFRP reinforced high strength and ultra high strength concrete beams10.1016/j.conbuildmat.2016.11.094 ↗
12. Efficiency of different techniques in flexural strengthening of RC beams under monotonic and fatigue loading10.1016/j.conbuildmat.2011.10.044 ↗
13. Durability of FRP rods for concrete structures10.1016/j.conbuildmat.2004.04.012 ↗
14. Basalt-based fiber-reinforced materials and structural applications in civil engineering10.1016/j.compstruct.2019.02.002 ↗
15. Long-term behavior of GFRP reinforcing bars10.1016/j.compstruct.2019.111283 ↗
16. Structural behavior of GFRP reinforced concrete columns under the influence of chloride at casting and service stages10.1016/j.compositesb.2017.10.011 ↗
17. Combined effects of saline solution and moist concrete on long-term durability of GFRP reinforcing bars10.1016/j.conbuildmat.2012.08.021 ↗
18. Effect of sequential exposure to UV radiation and water vapor condensation and extreme temperatures on the mechanical properties of GFRP bars10.1061/(ASCE)CC.1943-5614.0000828 ↗
19. Experimental study on seawater and sea sand concrete filled GFRP and stainless steel tubular stub columns10.1016/j.tws.2016.05.014 ↗
20. Performance of seawater-mixed concrete in the tidal environment10.1016/j.cemconres.2003.09.020 ↗
21. Compressive strength and slump flow of self compacting concrete uses fresh water and sea water
22. Secondary aggregates and seawater employment for sustainable concrete dyke blocks production: case study10.1016/j.conbuildmat.2016.03.097 ↗
23. Influence of seawater and blast furnace cement employment on recycled aggregate concretes’ properties10.1016/j.conbuildmat.2016.04.064 ↗
24. Bond mechanism and bond strength of GFRP bars to concrete: a review10.1016/j.compositesb.2016.04.068 ↗
25. Accelerated aging tests for evaluations of durability performance of FRP reinforcing bars for concrete structures10.1016/j.compstruct.2005.08.015 ↗
26. Bond durability of basalt fiber-reinforced polymer bars embedded in concrete under direct pullout conditions10.1061/(ASCE)CC.1943-5614.0000544 ↗
27. Experimental study on bond durability of glass fiber reinforced polymer bars in concrete exposed to harsh environmental agents: freeze-thaw cycles and alkaline-saline solution10.1016/j.compositesb.2016.10.083 ↗
28. Flexural behavior of concrete beams reinforced with hybrid (GFRP and steel) bars10.1061/(ASCE)CC.1943-5614.0000035 ↗
29. An experimental study of the flexural behaviour of GFRP RC beams and comparison with prediction models10.1016/j.compstruct.2009.05.005 ↗
30. Evaluation of the flexural strength and serviceability of geopolymer concrete beams reinforced with glass-fibre-reinforced polymer (GFRP) bars10.1016/j.engstruct.2015.08.003 ↗
31. Experimental study on crack width and crack spacing for Glass-FRP reinforced concrete beams10.1016/j.engstruct.2016.11.007 ↗
32. Experimental study of immediate and time-dependent deflections of GFRP reinforced concrete beams10.1016/j.compstruct.2012.08.052 ↗
33. Pereira · 2017
34. Development of self-compacting eco-concrete
35. NP EN 197-1:2001 in Cimento – Parte 1: Composição, especificações e critérios de conformidade para cimentos correntes. Caparica (Portugal): IPQ – Instituto Português da Qualidade.
36. NP EN 933-1:2001, in Análise granulométrica. Método de peneiração – Parte 1: Ensaios das propriedades geométricas dos agregados. Caparica (Portugal): IPQ - Instituto Português da Qualidade.
37. NP EN 12350-8:2010, in Ensaios do betão fresco - Parte 8: Betão autocompactável, ensaio de espalhamento. Caparica (Portugal): IPQ – Instituto Português da Qualidade.
38. NP EN 12390-3:2011, in Testing hardened concrete. Part 3: Compressive strength of test specimens. Caparica (Portugal): IPQ – Instituto Português da Qualidade.
39. NP EN 1992-1-1:2010, in Eurocódigo 2 – Projeto de Estruturas de Betão. Parte 1: Regras gerais e regras para edifícios. Caparica (Portugal): IPQ - Instituto Português da Qualidade, 2010.
40. Antonov · 2006 · 182
41. ASTM /D7205M:2006, in Standard test method for tensile properties of fiber reinforced polymer matrix composite bars. American Society for Testing and Materials, Pennsylvania, USA.
42. LNEC E397:1993, in Betões – Determinação do módulo de elasticidade em compressão. Especificação LNEC, Portugal.
43. Bond behavior of fiber reinforced polymer bars under direct pullout conditions10.1061/(ASCE)1090-0268(2004)8:2(173) ↗
44. Local bond-slip response of GFRP rebar in ultra-high-performance fiber-reinforced concrete10.1016/j.compstruct.2014.09.055 ↗
45. Experimental study on bond performance of GFRP bars in self-compacting steel fiber reinforced concrete10.1016/j.compstruct.2012.07.009 ↗
46. Pullout response of a smooth fiber with an end anchorage
47. Analytical simulation of pull-out tests––the direct problem10.1016/j.cemconcomp.2004.01.006 ↗
48. Bond behavior between glulam and GFRP’s by pullout tests10.1016/j.compositesb.2011.10.022 ↗
49. Pullout behavior of steel fibers in self-compacting concrete10.1061/(ASCE)MT.1943-5533.0000001 ↗
50. Modeling of bond between near-surface mounted CFRP laminate strips and concrete10.1016/j.compstruc.2004.03.047 ↗
51. Sena-Cruz · 2005
52. Bond behavior of near-surface mounted CFRP laminate strips under monotonic and cyclic loading10.1061/(ASCE)1090-0268(2006)10:4(295) ↗
53. Modelling of bond between galvanized steel rebars and concrete